Order no.: PCE-DFG 2K5 X

Force Gauge PCE-DFG 2K5 X

£ 921.00
£ 1,105.20
price ex. (VAT / delivery)
Delivery time: 5-7 working days


Force gauge with external measuring cell up to 2,500 N / various alarm modes / graphic display / data logger / incl. software / incl. eyebolts

The force gauge can be used to measure both tensile and compressive forces with high accuracy. Tensile and compressive forces are often measured in the test laboratory. For example, to determine the yield point, the tear-off force or the force required to actuate buttons or switches. The force gauge is supplied with an external measuring cell and can measure forces of up to 2,500 N. Various eyelets or hooks with an M12 thread can be attached to the measuring cells. It is also possible to attach your own devices to the measuring cell using these threads.

The internal memory of 32 GB offers space for 30 million measuring points. This allows measurement protocols to be created, saved and exported. The force tester has a USB-C interface that can be used to read the measurement data into the PC software. The force tester is equipped with a graphic LCD that displays the measured values both numerically and graphically. In addition, a bar chart shows the measured value in the selected measuring range. The measuring cell is protected to IP67 and can therefore also be used in harsh industrial environments.

Various force test stands are available for adapting the force gauge. A special feature of the force tester is the possibility to exchange the measuring cell between the models. By entering the sensitivity in mV/V, all measuring cells can be used with just one handheld device.


- Measuring range: 0 ... 2,500 N
- Measuring rate: 1 ... 7,200 Hz
- Accuracy: ±0.05 % F.S.
- Graphic display
- USB-C interface
- PC software
- 32 GB memory for 30 mio. measuring points
- Measuring cells can be easily changed
- Various alarm modes
- Bar chart for displaying the measured value in the measuring range
- Calibration reminder


Measuring range  0 ... 2500 N
Resolution  1 N
Accuracy  ± 0.05 % F.S.
General technical data 
Units  kPa, kg, g, ft, N, lb, t, kN, Pa, Nm, Ncm
Display type  LCD with illumination
Display size  2.8 inch
Adjustable measurement rate  1 ... 7200 Hz
Memory medium  Internal memory
Storage capacity  32 GB
Memory interval of  1 Hz
Memory interval up to  7200 Hz
Operating time  13 h
Automatic switch-off adjustable  1 ... 15 min.
Automatic switch-off can be deactivated  Yes
Alarm  Optical, acoustic
Alarm modes  Inside, Outside, Crack, Switch off
Protection class measuring cell  IP67
Menu language  German, English, French, Italian, Spanish, Dutch, Portuguese, Danish, Turkish, Polish, Russian, Chinese, Japanese
Protection class (device)  IP52
Power supply  USB 5 V DC, 500 mA
Weight  255 g
Dimensions (L x W x H)  165 x 85 x 32 mm
Operating conditions  -20 ... 65 °C , 10 ... 95 % r.H
Storage conditions  -20 ... 65 °C , 10 ... 95 % r.H

Delivery Scope

1 x PCE-DFG 2K5 X force gauge
1 x PCE-DFG 2K5 X load cell
2 x eyebolt with M12 thread
1 x case
1 x USB-C cable
1 x PC software
1 x operating instructions