Environmental Tester
Order no.: PCE-PDR 10
The PCE-PDR 10 environmental tester is a pressure measurement gauge. Up to three pressure sensors can be connected to this environmental tester and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected.
- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!
Manufacturer: PCE Instruments
Order no.: PCE-PH 23
The environmental tester PCE-PH 23 is used for rapid fluid analysis. The environmental tester offers the possibility of determining the temperature and the pH value. The operation of the environmental tester PCE-PH 23 is carried out via the four front-mounted buttons.
- Measuring range pH measurement: 0.00 ... 14.00 pH
- Resolution pH measurement: 0.01 pH
- Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
- Graphic display
- 1-, 2- or 3-point calibration
- Four front panel buttons
- Memory (Save & Recall)
Manufacturer: PCE Instruments
Order no.: PCE-RCM 15
The environmental tester PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the environmental tester measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature.
Measured quantity:
- Formaldehyde: 0 ... 1,999 mg / m³
- TVOC: 0 ... 9,999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C)
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
Order no.: PCE-RCM 16
The environmental tester PCE-RCM 16 is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the environmental tester PCE-RCM 16 is dimensioned so that all measured values can be read directly.
Metrics
- TVOC: 0.000 ... 9.999 mg / m³
- PM1, PM 2.5, PM10: 0 ... 999 μg / m³
- Temperature: 0 ... 50°C / 32 ... 122°F
- Humidity: 20 ... 90% rh
- CO2: 0 ... 5000 ppm / m³
Manufacturer: PCE Instruments
Order no.: PCE-G28
PCE-G28 is a portable, handheld environmental electromagnetic field radiation tester or gauss meter that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This EMF radiation detector comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).
- Measurement range: 0 ... 20000 mG / 0 ... 2000 µT
- Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
- Resolution: 0.1 mG / 0.01 µT
Manufacturer: PCE Instruments
Order no.: PCE-HVAC 3-ICA
PCE-HVAC 3 is a environmental tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the environmental tester calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 environmental tester.
- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-THB 38-ICA
The PCE-THB 38 environmental tester is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the environmental tester is sent out manufacturer calibrated. An ISO certification is available optionally.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-RCM 11
The environmental tester PCE-RCM 11 serves as an indicative test of environmental parameters. The environmental tester PCE-RCM 11 enables the measurement of fine dust, temperature and relative humidity. The bright display of the environmental tester provides information about the already mentioned parameters.
- Fine dust, formaldehyde, humidity, temperature, TVOC
- Particle size channels : PM 2.5 / PM 10
- Measuring range TVOC: 0.00 ... 9.99 mg / m³ (volatile organic compounds)
- Measuring range temperature: -20 ... 70°C / -4 ... 158°F
- Measuring range humidity: 0 ... 100% RH
- Measuring range formaldehyde: 0.00 ... 5.00 mg / m³
- Interface: USB
- For indicative measurements
Manufacturer: PCE Instruments
Order no.: PCE-170 A-ICA
Environmental Tester PCE-170 A to 40,000 lux, internal sensor, automatic zero adjustment. The environmental tester has a large measurement range, short response time and a compact housing allowing for quick, effortless one-hand operation.
- Large 5-digit LCD display
- Measurement range: 0.00 to 40,000 lux
- Resolution: 0.01 lux in the range 39.99 Lux
- Sensor: silicon photodiode
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Order no.: PCE-228-ICA
The environmental tester PCE-228-ICA is a very easy-to-use pH / mV / °C /°F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface. You can buy the environmental tester PCE-228-ICA here in our shop.
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Incl. ISO calibration
Manufacturer: PCE Instruments
Order no.: PCE-HT 120
The environmental tester PCE-HT 120 is used to measure temperature and humidity. The measurement data from the environmental tester are displayed in an app on the tablet or smartphone and the display.
Measuring function
- Humidity
- Temperature
- Dew point
- Wet bulb temperature
- Ethernet: WLAN / WIFI
- Accespoint and client mode
- Connection for external PT1000 sensor
Measuring function
- Humidity
- Temperature
- Dew point
- Wet bulb temperature
- Ethernet: WLAN / WIFI
- Accespoint and client mode
- Connection for external PT1000 sensor
Manufacturer: PCE Instruments
Order no.: PCE-228LIQ
The environmental tester PCE-228LIQ is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface. You can buy the environmental tester PCE-228LIQ here in our shop.
- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for beer, blood, and dairy products
Manufacturer: PCE Instruments
Order no.: PCE-228SLUR
The environmental tester PCE-228SLUR is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred via the RS-232 interface directly from the environmental tester to a PC. You can buy the environmental tester PCE-228SLUR here in our shop online.
- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for measurements in mud and soil
Manufacturer: PCE Instruments
Order no.: PCE-330
PCE-330 is an environmental tester or meter with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.
- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH
Manufacturer: PCE Instruments
Order no.: PCE-HT 420
The environmental tester records humidity and air temperature and stores it internally. This compact and robust environmental tester in mini format and with a large memory (up to a maximum of 32,000 values / 16,000 values per parameter) is mainly used for long-term registration (refrigerated counters in department stores, refrigerated transport, warehouses, PC climate chambers).
- Temperature: -40 ... 70°C / -40 ... 158°F
- Humidity: 0 ... 100%
- Dew point calculation (accuracy ± 2°C / 3.6°F)
- Operating temperature: -40 ... 80°C / -40 ... 176°F, max. 80% rF
- Datalogger for temperature and humidity
- LCD display
- E-mail when value is exceeded
- Ethernet
- Power supply or PoE (selectable)
Manufacturer: PCE Instruments
Order no.: PCE-PH 25
The environmental tester PCE-PH 25 offers the user comprehensive measuring applications. In addition to determining the pH value, the PCE-PH 25 environmental tester also shows the conductivity, the filtrate dry residue, the salinity and the temperature of the sample. The environmental tester PCE-PH 25 is a measuring instrument for mobile use.
- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.01 pH
- Measurement data memory for 50 data sets
- Self-calibration possible
- Display of salinity and conductivity
Manufacturer: PCE Instruments
Order no.: PCE-AQD 10
The environmental tester PCE-AQD 10 is used to measure air quality. The environmental tester PCE-AQD measures 10 carbon dioxide, temperature and humidity. The CO2 sensor from the environmental tester is disconnected from the main unit with a connection cable.
- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
Manufacturer: PCE Instruments
Order no.: PCE-172-ICA
The PCE-172 environmental tester is used for accurate measuring of brightness in the industrial sector, commercial sector, agricultural sector, and for research.
- Range: 40 ... 400,000 lux
- Accuracy: ± 5% of reading ± 10 digits (10,000 lux)
- 3.5-digit LCD display
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Order no.: PCE-RCM 12
The environmental tester PCE-RCM 12 is used for indicative testing of environmental parameters.
The environmental tester PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity.
The bright display of the environmental tester provides information about these parameters.
- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C
/ -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Order no.: PCE-228LIQ-ICA
The environmental tester PCE-228LIQ-ICA is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface. You can buy the environmental tester PCE-228LIQ-ICA here in our shop.
- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for beer, blood, milk products
- Incl. ISO calibration
Manufacturer: PCE Instruments