Environmental Meter

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
- Incl. ISO calibration certificate

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection

With the environmental meter you can ensure the right climate in your office. The environmental meter measures the CO2 content of the air, the relative humidity and the room temperature. The environmental meter shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

- Large CO2 measuring range up to 9999 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- Network operation
- Suitable for classrooms, offices, lecture halls

- Formaldehyde in mg / m³
- Measurement of TVOC
- Temperature measurement
- Alarm function
- Mass concentration

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media
- Incl. ISO calibration certificate

- Altimeter up to 9,000 m / 29,527 ft
- Air pressure (absolute)
- Wind speed

- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases

PCE-HVAC 3 is a multifunction environmental meter, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.

- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

- Infrared measuring range: -35 ... 330°C / -31 ... 626°F
- Type of measurement puncture sensor measuring range: -20 ... 260°C / -4 ... 500°F
- Measurement spot ratio: 4: 1
- For frozen, cold and hot foods
- Incl. ISO calibration certificate

The soil environmental meter is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The soil environmental meter can be recalibrated by using the calibration solutions that are supplied with the device.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- pH electrode for piercing into Soil
- Incl. ISO calibration certificate

**Care must be taken when inserting probe to not break it**

This environmental meter with outside sensor is a real all-rounder. The wireless environmental meter with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless environmental meter and outside sensors. The weather data of the environmental meter with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep

Software for PCE-322ALEQ and PCE-322ALEQ-ICA. Software for sound level meters for reading the data and transmitting to a PC or laptop. The requirements are:

- Windows operating system from Windows XP SP3
- USB port (2.0 or higher).
- An installed .NET Framework 4.0
- A minimum resolution of 800x600 pixels
- Processor: at least 1 GHz
- 4 GB of RAM is recommended
- CD-ROM driver
- Optional: a printer

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop!

PCE-EM 888 is a portable handheld environmental meter ideal for monitoring weather conditions and the performance of heating, ventilation and air conditioning (HVAC) systems. This multifunctional digital device is used to measure wind speed, volumetric air flow, temperature, relative humidity, light and barometric pressure.

- Wind speed
- Volumetric air flow
- Air temperature
- Relative humidity
- Type K thermocouple sensor
- Barometric pressure
- Light

The Environmental Meter PCE-PHM 14 is designed for permanent monitoring of the pH value. The environmental meter PCE-PHM 14 has a backlit LC display that is easy to read remotely. The environmental meter is equipped with an automatic calibration function at pH 4, 7 and 10. This means that the meter automatically detects the buffer solution and calibrates itself.

- Measuring range: 0 ... 14 pH
- Resolution: 0.01 pH
- Compact device for wall mounting
- Internal calibration function
- Ideal for continuous monitoring
- Incl. PH electrode PE - 03
- Incl. ISO calibration certificate

- 75 mm / 3 in digit height
- 30 ... 130 dBA measuring range
- 0.1 dB or 1 dB resolution
- For offices, schools, event rooms
- Memory for 657,000 readings

PCE-EM 29 is a portable handheld environmental meter or electromagnetic radiation detector with a spherical triaxial (3-axis) three-dimensional (3D) isotropic sensor used to measure electromagnetic fields (EMFs) as well as radio frequencies (RFs). This easy-to-use battery-powered RF meter features a large 4-digit LCD screen and an adjustable value limit with acoustic alarm functionality.

- Frequency range: 50 MHz to 3.5 GHz
- Measures EMF of 5G cellular Low-band and Mid-band
- Measurement range: 38 mV/m to 11 V/m
- Accuracy: ±1.0 dB (50 MHz to 1.9 GHz), ±2.4 dB (1.9 GHz to 3.5 GHz)
- Displays units in mV/m, V/m, µgA/m, mA/m, µgW/m² or mW/m²
- Calculates average value and stores up to 99 readings to memory 

 

- Measuring range: 30 ... 130 dBA, 35 ... 130 dBC
- Measurement functions: Lp, LAeq, LAe, LCpeak
- Accuracy: ± 1.5 dB (at 1 KHz and 94 dB)
- Class 2 with frequency weighting: A and C
- Storage for 10 readings and bar graph display
- Incl. ISO calibration certificate