Environmental Meter

• Automatic range: 30 … 130 dB
• Manual range: 30 … 80 / 50 … 100 / 80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Memory capacity: 32700 values

PCE-WB 20SD is a data-logging environmental meter used to measure indoor / outdoor wet bulb globe temperature (WBGT), black globe temperature (TG), wet bulb temperature (WB), dew point temperature, air temperature (TA) and relative humidity. Thus, this multipurpose data-recording device is an ideal tool for evaluating heat stress risks in different work environments.

• Programmable WBGT alarm setting with audible and visual alerts
• Manual (push-button) or automatic (adjustable 1 … 3600 sec) sampling
• SD card memory (1 … 16 GB) allows for quick and easy data transfer to a PC

PCE-330 is an environmental meter or hygro-thermometer with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.

• Temperature range: -20 … 60°C / -4 … 140°F
• Relative humidity range: 0 … 100% RH
• Resolution: 0.1° / 0.18°F
• Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 … 4.0% RH
• Internal memory: up to 16,000 date- and time-stamped readings
• Incl. ISO calibration certificate

PCE-MFM 3000 is a handheld environmental electromagnetic field detector or gauss meter that detects both static (DC) permanent magnet (rare earth) magnetic and dynamic (AC) electromagnetic fields (EMFs) and displays measurement results in gauss (G) or milli Tesla (mT). This portable magnetic field measuring device comes with an external sensor and features an RS-232 port for downloading data to a PC.

• Measurement range: 0 … 30,000 Gauss DC fields, 0 … 15,000 Gauss AC 50/60 Hz fields
• Accuracy: ± 5%; + 20 digits (static) / + 10 digits (dynamic)
• Resolution: 0.1 G / 0.01 mT
• Measures both AC (50/60 Hz) and DC magnetic fields, permanent magnets are DC fields 
• Single axis Hall sensor (Transverse)with auto temp. compensation
• Incl. ISO calibration certificate

The PCE-WMH-3 is an environmental meter or analyzer used to measure the moisture content of wood. This hammer-style environmental meter features preset characteristic curves for measuring moisture in 270 different wood types.

• Measuring range: 6 … 60 % moisture content
• Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
• Resolution: 0.1 %

The environmental meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

• Measurable particle sizes: PM2.5 / PM10
• Particle sizes: 0.3 / 2.5 µm
• Mass concentration
• Particle counter
• Temperature
• Humidity (RH)
• Flash memory for approx. 12 measurement runs

The PCE-WP24 is a environmental meter used to perform noninvasive, nondestructive moisture measurements of wood, timber and other construction or building materials. An ideal tool for assessing everything from lumber to floors and more, this environmental meter uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches to 60 mm / 2.36 inches deep (depending on substrate) to return a mean-value moisture content percentage.

• Moisture content measuring range: 4% … 60% wood, 0% … 10% building  materials
• Resolution: 0.1%
• Accuracy: ±0.7%

• Environmental Meter, adjustable alarms
• supply voltage: 230 V DC
• input signal: 4...20 mA
• communication: RS485
• data logger
• sensor supply via evaluation unit
• protection class: IP65

• Environmental Meter, adjustable alarms
• supply voltage: 24 V DC
• input signal: 4...20 mA
• communication: RS485
• data logger
• sensor supply via evaluation unit
• protection class: IP65

PCE-WM1 is a multi-function environmental meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.

• Temperature range: -20 … 80°C 
• Relative humidity range: 10 … 95% RH
• Absolute humidity range: 0.5 … 74.4 g/m³