Earth Tester / Earth Resistance Meter

The earth tester / earth resistance meter for measuring earthing resistances, specific earth resistances and ohmic resistances can be found in our range. The battery-operated earth testers for measuring earth resistance have a timer function (e.g. 3 min), a data hold function, and a multi-digit LCD display. The resistance ranges of the earth resistance meters range from 0 ... 20, 200 Ω or 2000 Ω, depending on the model, and have a resolution of 10 Ω / 100 Ω / 1 Ω.

The measuring system of the earth tester measures the earth resistance using a constant current inverter (approx. 800 Hz, 2 mA) and the earth voltage using a rectifier (5 kΩ / V approx. 40 ... 500 Hz). The earth resistance meters are small all-rounders. Differentiating between earth, phase and neutral conductors has never been easier. Incorrect connections, outdated wiring or a defective earth conductor can be quickly identified with the help of an earth tester.

If you have any questions about the products on this website, please contact us at or +44 ( 0 ) 161 464902 0.

Earth Tester / Earth Resistance Meter PCE-ERT 10

£ 177.00

Price excl. VAT &. delivery

This earth tester / earth resistance meter is a handy device which allows fast and easy determination of the earth resistance. The grounding resistance is determined with this earth tester / earth resistance meter in three measuring ranges up to 2000 Ω using three-wire technology.

Three-wire measuring method
Earth resistance is determined in three measuring ranges
Ground voltage measurement up to 200 V
Zeroing possible
Alternating and DC voltage measurement

Earth Tester / Earth Resistance Meter PCE-ET 3000

£ 469.00

Price excl. VAT &. delivery

Earth Tester / Earth Resistance Meter (resistance / voltage) is used to measure lightning-arresters or ground connection lightning-arresters for all types of buildings.

Range: 0 … 19.99/ 0 … 199/ y 0 … 1999 Ω. and 0 … 200 V AC 50/60 Hz
Resolution: 10/ 100 mΩ / 1 Ω. and 0.1 V
Accuracy: ± 2% + 2 positions and ± 3% + 2 positions.
Lower measurement limit.: 0.01 Ω.
Current of measurement: 2 mAeff / rms

Earth Tester / Earth Resistance Meter PCE-ET 5000

£ 2,563.00

Price excl. VAT &. delivery

The earth tester / earth resistance meter is a versatile ohmmeter. With this earth tester / earth resistance meter a variety of resistance measurements can be performed. Thus, with the earth tester / earth resistance meter, the possibility exists to perform a normal resistance measurement of 2- or 4-pole application.

Interference currents, interference voltages, frequencies
Direct and indirect resistance measurement
Data memory for later analysis on the PC
Mobile use thanks to battery and batteries

Earth Tester PCE-ITE 50

£ 945.00

Price excl. VAT &. delivery

The PCE-ITE 50 is a robust earth tester with a large 3.5" TFT color LCD display. The earth tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

3.5" color TFT LCD display
Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
SD card and Bluetooth
Dual display
Good / bad FI test
Low Ohm measurement
Up to 1000V terminal voltage

Earth Tester / Earth Resistance Meter PCE-ECT 50-UK

£ 129.00

Price excl. VAT &. delivery

The earth tester / earth resistance meter is a handy measuring device. Due to the robust and ergonomic design, the user can work comfortably with the earth tester. The earthing resistance can be determined quickly with the earth resistance meter.

Measuring range: 0 … 2000 Ω
Measuring principle: Continuity test / earth resistance measurement
Multi-coloured, backlit LCD
Installation category III
50/60 Hz operating voltage