Dynamometer

Order no.: PCE-DFG N 1K
The PCE-DFG N 1K dynamometer measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 2.5K
The PCE-DFG N 2.5K dynamometer measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch. You can buy the dynamometer PCE-DFG N 2.5K here in our online shop. 

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 5K
The dynamometer PCE DFG N 5K measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch. You can buy the dynamometer PCE-DFG N 5K here in our online shop. 

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 10K
The PCE-DFG N 10K dynamometer measures both tensile and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch. You can buy the dynamometer PCE-DFG N 10K here in our online shop.

- Measuring range: 0 ... 10,000 N / 0 ... 2,248 lbs
- Resolution: 5 N / 1.12 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 0.5K
The dynamometer PCE-DFG NF 0.5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 0.5 kN / 500 N / 112 lbs
- Resolution: 0.05 N / 0.01 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 1K
The dynamometer PCE-DFG NF 1K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 1 kN / 1,000 N / 225 lbs
- Resolution: 0.1 N / 0.02 lbs
- Accuracy: ±0.5 % of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 2K
The dynamometer PCE-DFG NF 2K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 2 kN / 2,000 N / 450 lbs
- Resolution: 0.2 N / 0.04 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 5K
The dynamometer PCE-DFG NF 5K with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The load cell has several threaded holes on the bottom that allow a firm installation.


- Measuring range: 0 ... 5 kN / 5,000 N / 1,124 lbs
- Resolution: 0.5 N / 0.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 10K
The dynamometer PCE-DFG NF 10K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has on the bottom of several threaded holes that allow a firm installation. The dynamometer PCE-DFG NF 10K can be purchased here in our online shop. 

- Measuring range: 0 ... 10 kN / 10,000 N / 2245 lbs
- Resolution: 1 N / 0.22 lb
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 20K
The dynamometer PCE-DFG NF 20K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has on the bottom of several threaded holes that allow a firm installation. You can buy the dynamometer PCE-DFG NF 20K here in our online shop. 

- Measuring range: 0 ... 20 kN / 20,000 N / 4,500 lbs
- Resolution: 2 N / 0.5 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 50K
The dynamometer PCE-DFG NF 50K with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has on the bottom of several threaded holes that allow a firm installation. You can buy the dynamometer PCE-DFG NF 50K here in our online shop. 

- Measuring range: 0 ... 50 kN / 50,000 N / 11,240 lbs
- Resolution: 5 N / 1.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 Dynamometer is designed to check the adhesive force of edges and edge bands on support materials. With the Dynamometer, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 Dynamometer is designed to check the adhesive force of edges and edge bands on support materials. With the Dynamometer, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 20100 Micro-Linie

The 100 g Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 100 g
- Resolution: 0.01 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 20030 Micro-Linie

The 30 g Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 30 g
- Resolution: 0.0025 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 20060 Micro-Linie

The 60 g Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 60 g
- Resolution: 0.005 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment  

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 20010 Micro-Linie

The 10 g Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 10 g
- Resolution: 0.001 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 20001 Micro-Linie

The 1N Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 1 Newton (N)
- Resolution: 0.01 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 41000 Medio-Linie

The 1000 g Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 1000 g
- Resolution: 10 g
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 40010 Medio-Linie

The 10 N Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.


- Measurement range: 10 N
- Resolution: 0.1 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment 

 

Manufacturer: Pesola
Test Instruments manufacturer