Data Logger / Data Logging Instrument

Data Logger PCE-MPC 15
£ 623.00
Price excl. VAT &. delivery

The data logger is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the data logger determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

  • Measurable particle sizes: PM2.5 / PM10
  • Particle sizes: 0.3 / 2.5 µm
  • Mass concentration
  • Particle counter
  • Temperature
  • Humidity (RH)
  • Flash memory for approx. 12 measurement runs

Data Logger PCE-PDA 1000L
£ 651.00
Price excl. VAT &. delivery

The data logger PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this data logger in the range between -100 … 2000 kPa. The data logger PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.


  • Measuring range pressure: -100 … 2000 kPa relative / -14.5 … 290 PSI
  • Resolution: 0.01 kPa, 0.1 kPa
  • Accuracy: <± 0.5% of the measuring range
  • USB interface
  • Data logger
  • Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

dB Data Logger PCE-NDL 10
£ 659.00
Price excl. VAT &. delivery

The dB data logger is used to determine volume. The PCE-NDL 10 dB data logger is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the dB data logger has an SD card slot that enables the use of an SD card as an additional storage medium.


  • Measuring range: SPL: Auto 30 … 130 dB
  • Resolution: 0.1 dB
  • Low sampling rate
  • Automatic or manual storage
  • Selectable storage interval
  • Backlit LC display
  • Dose measurement or SPL measurement

Vibration Data Logger PCE-VDR 10
£ 683.00
Price excl. VAT &. delivery

PCE-VDR 10 is a single-axis accelerometer or vibration data logger monitor with real-time measurement and data logging capabilities. This vibration data logger records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this vibration data logger compatlble with control systems.

  • Acceleration measuring range:   0.5 … 199.9 m/s, 0.05 … 20.39 g, 2 … 656 ft/s
  • Velocity measuring ranges:   0.5 … 199.9 mm/s, 0.05 … 19.99 cm/s, 0.02 … 7.87 in/s
  • Frequency range: 10 … 1000 Hz
  • Analog output: 4 … 20 mA
  • RS-232 and USB interface

CO2 Data Logger / Room Climate Data Logger PCE-AQD 20
£ 691.00
Price excl. VAT &. delivery
The CO2 data logger / room climate data logger PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and CO2 data logger is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
  • PM2.5
  • Humidity
  • Temperature
  • CO2
  • Air pressure
  • Memory: SD card max. 32 GB
  • Ideal for workplace monitoring
  • Alarm function
Data Logger PCE-MPC 20
£ 745.00
Price excl. VAT &. delivery
The Data Logger PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes in the particle collector are 0.3, 2.5 and 10 μm.

  • Measurable particle sizes: PM2.5 / PM10
  • Measuring range Mass concentration: 0 … 2000 μg / m³
  • Measurable particle sizes: 0.3, 2.5 and 10 μm
  • Display with graphic real-time diagram
  • Data memory up to 5000 data sets
Humidity / Temperature Data Logger Set PCE-HT 71N-10
£ 745.00
Price excl. VAT &. delivery

The PCE-HT 71N Data Logger detects air temperature and humidity and stores readings to its internal memory. This Data Logger is compact and has enough memory to store up to 32,000 readings, 16,000 for each parameter, and is used above all as a Data Logger, in supermarket refrigeration units, refrigerated transport, warehouses and other temperature controlled environments. These temperature and humidity logging test instruments are manufacturer calibrated. An ISO calibration certificate is an option.


  • Measurement range: 0 … 100% RH / -35 … 80°C / -31 … 176°F
  • Accuracy: ± 3% RH (20 … 80%) and  ± 5% / ± 1°C (1.8°F)
  • Resolution: 0.5% RH / 0.1°C (0.18°F)
  • Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

CO2 / Room Climate Data Logger PCE-AQD 20-ICA Incl. ISO Calibration Certificate
£ 765.00
Price excl. VAT &. delivery
ISO Calibration
The CO2 / Room Climate Data Logger PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and CO2 data logger is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
  • PM2.5
  • Humidity
  • Temperature
  • CO2
  • Air pressure
  • Memory: SD card max. 32 GB
  • Ideal for workplace monitoring
  • Alarm function
  • Incl. ISO calibration certificate
dB Data Logger PCE-NDL 10-ICA incl. ISO Calibration Certificate
£ 795.00
Price excl. VAT &. delivery
ISO Calibration

The dB data logger is used to determine volume. The PCE-NDL 10 dB data logger is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the dB data logger has an SD card slot that enables the use of an SD card as an additional storage medium.


  • Measuring range: SPL: Auto 30 … 130 dB
  • Resolution: 0.1 dB
  • Low sampling rate
  • Automatic or manual storage
  • Selectable storage interval
  • Backlit LC display
  • Dose measurement or SPL measurement