Condition Monitoring

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
- Incl. ISO calibration certificate

The PCE-LES 100 Rotation Meter combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the Rotation Meter does not need periodic changing of bulbs. The Rotation Meter is sent to you calibrated (by the manufacturer PCE Instruments).

- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

The PCE-VT 2800 Condition Monitoring Vibration Meter measures acceleration, oscillation speed and shift of vibrating parts, machines and equipment. The device features an integrated data logger to record vibration measurements over time. Measurement data is stored on an SD card memory and can be transferred directly to a PC via USB or RS-232 interface.

- Handheld instrument with vibration data logging function
- Frequency range: 10 Hz ... 1 KHz
- True-RMS (TRMS), max-hold, data-hold and peak-value
  functionality
- Adjustable sampling rate 

 

The PCE-LES 100-ICA condition monitoring tachometer combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the condition monitoring tachometer does not need periodic changing of bulbs. The condition monitoring tachometer is sent to you calibrated (by the manufacturer PCE Instruments).

- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

The condition monitoring meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This condition monitoring meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display.

Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate

PCE-VT 204 is a multifunction handheld vibration meter for condition monitoring. PCE-VT 204 has the ability to accurately measure both rotation and vibration. An ideal tool for the testing and inspection of machine parts and components such as motors, transmissions, gears, gear boxes and wheels, this multi-purpose device measures revolutions per minute (RPMs) as well as three-axis vibration, i.e., speed or velocity, displacement and acceleration.

- Vibration measurement: Velocity or speed, acceleration and displacement
- RPM measurement: Contact / mechanical and noncontact / optical
- Internal memory for up to 1000 readings
- Min / max and data hold functions
- RS-232 port

 

The condition monitoring meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This condition monitoring meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display.

Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Includes needle sensor and handgrip
- Incl. ISO calibration certificate

PCE-T 1200 is a 12-channel temperature data logger that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable datalogging interval from 1 ... 3600 seconds per channel
- Includes 2 Type K sensors 1-meter in length

Measuring range:
PE: pulse-echo mode 0.65 ... 600 mm (steel)
EE: echo-echo mode 2.50 ... 60 mm
Accuracy:
± 0.04 mm H [mm] (<10 mm); ± 0.4% H [mm] (> 10 mm)
H refers to the material thickness of the workpiece
Resolution: 0.1 mm / 0.01 mm / 0.001 mm (adjustable)

- Measuring range standard sensor : 0 ... 60 mm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate

The 4-channel PCE-VM 5000 Vibration Meter performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.

- 4 channels / inputs
- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity, displacement
- Connection of up to 4 sensors simultaneously, 2 included
- Data storage on SD card
- Sampling rate: minimum 1 sec.
- Sensors with magnetic feet at cable 39" (1.1 m)

 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft

- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft 

- Connection to a smartphone via WLAN
- 30 meters / 98 ft cable length
- Camera head diameter: 30 mm
- Display: 7" LCD (800 x 480 pixels)
- Self-aligning camera
- Memory: SD card up to 32 GB

The PCE-VM 40C Condition monitoring vibration meter with SMS alert functionality was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The condition monitoring vibration meter measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40C Condition monitoring vibration meter can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time.

- Triaxial acceleration meter
- In accordance with BS 7385 standard
- Quad band GSM (optional)
- SMS alarm notifications  (optional)
- Memory size of 100,000 values (SD card)
- Integrated NiMH battery
- FFT analysis, XYZ and vector sum display

 

PCE-TU 3 is a condition monitoring laser shaft alignment tool designed to aid in aligning rotating equipment (e.g., electric motor and direct-coupled machine) shafts to prevent premature failure of couplings, bearings and mechanical seals. PCE-TU 3 also helps you detect and correct soft foot to avoid costly downtime.

- Max. 10 m / 32.8 ft distance between sensors
- Accuracy: ± 1 % + 0.001
- Resolution: 0.001 mm / 0.1°

In loud environments, it is often difficult to pinpoint the source of a sound. The easy-to-operate PCE-MSV 10 condition monitoring sound level meter visualizes sound in real time, creating a visual road map to a sound’s source. Also referred to as a noise meter, sound pressure meter, portable sound camera or sound level camera, the PCE-MSV 10 condition monitoring sound level meter can be used in various stages of machine and equipment design, manufacture and operation, from engineering research and development (R&D) to preventative maintenance and beyond. Lightweight and compact, the PCE-MSV 10 portable sound level meter features:

- Measurement range of 30 … 130 dBA
- Frequency range of 160 … 6000 Hz
- Real-time image and video recording