Condition Monitoring

Condition Monitoring Infrared Thermometer PCE-779N-ICA incl ISO Calibration Cert
£ 272.00
Price excl. VAT &. delivery
ISO Calibration

The Condition Monitoring Infrared Thermometer measures temperatures quickly and without contact. The Condition Monitoring Infrared Thermometer can be used for almost all surfaces. The emissivity of the infrared thermometer is adjustable over the range of 0.1 … 1.0. The Condition Monitoring Infrared Thermometer has various measurement functions such as max, min and average measurement.


  • OLED-Display
  • Measuring range: -60 … 760°C / -76 … 1400°F
  • Additional thermocouple measurement -64 … 1400°C / -83.2 … 2552°F
  • Dual Laser
  • Resolution: 0.1°C / 0.18°F at -83.2 … 999.9°C (-117.8 … 1831.8°F), otherwise 1°C / 1.8°F
  • incl. ISO Calibration Certificate

 

Condition Monitoring Thermometer PCE-T 330-ICA incl. ISO Calibration Certificate
£ 272.00
Price excl. VAT &. delivery
ISO Calibration

 

The Condition Monitoring Thermometer has two measuring inputs. Each measuring input from the Condition Monitoring Thermometer can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the Condition Monitoring Thermometer shows rapid temperature fluctuations.

 

  • Measuring range dependent on sensor: -200 … 1370 °C / -328 … 2498 °F
  • Resolution: 0.01 °C
  • Two-channel temperature data logger
  • For thermocouples type K, T and J
  • Data storage for 20,000 measuring points
  • incl. ISO Calibration Certificate

 

Condition Monitoring Vibration Sensor Switch PCE-VS10
£ 272.00
Price excl. VAT &. delivery

The PCE-VS10 is a vibration meter, analyzer or condition monitoring vibration sensor switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated condition monitoring vibration sensor switch features a red and green visual warning or alarm with programmable high pass and low pass filters.


  • Frequency range (max.): 0.1 Hz …10 kHz
  • Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
  • Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
  • Mounting: M8 stud bolt

 

Condition Monitoring Vibration Meter PCE-VT 1100M
£ 282.00
Price excl. VAT &. delivery

The condition monitoring vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this condition monitoring vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

 

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units only
  • Holds the reading after each measurement
  • Easy to handle and battery operated
  • Standard probe: 10 mm
  • including magnetic sensor

 

Condition Monitoring Thermometer PCE-313A
£ 300.00
Price excl. VAT &. delivery

The PCE-313A is a Condition Montoring Thermometer that measures relative humidity and temperature and can be used in the air-conditioning sector. The Condition Montoring Thermometer can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Condition Montoring Thermometer to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the Condition Montoring Thermometer can be used for long term data acquisition. The Condition Montoring Thermometer comes manufacturer calibrated (ISO or as an option).


  • Relative humidity: 5 … 95% r.H.
  • Temperature: 0 … 50°C / 32 … 122°F
  • Type K: -50 … 1300°C / -58 … 2372°F
  • Calculated dew point: -25.3 … 48.9°C / -13.5 … 120°F
  • Wet bulb temperature: -21 … 50°C / -5.8 … 122°F
  • Memory: SD card (1 … 16 GB)

 

Condition Monitoring WiFi Inspection Camera PCE-WVE 100
£ 309.00
Price excl. VAT &. delivery
Wireless
The Condition Monitoring WiFi Inspection Camera with the 4-way camera head is a versatile tool for visual inspection and image capture in hard-to-reach areas. With a flexible cable length of 1 meter, the Condition Monitoring WiFi Inspection Camera provides the necessary reach to penetrate tight spaces and capture accurate images.

  • 4-Way Camera Head
  • Camera Head Diameter:6.5 mm
  • Cable Length: 1 m flexible
  • Image transmission via WiFi
  • iOS and Android App
  • Image and video storage through the app
  • 6 dimmable LEDs on the camera head
Condition Monitoring Sound Level Meter PCE-SLD 10
£ 327.00
Price excl. VAT &. delivery
The condition monitoring sound level meter is used for permanent monitoring of the sound level. In addition to storing the measured values, the condition monitoring sound level meter is able to display the measured values ​​on a display and output them as a 4 … 20-mA analog value.

  • Measuring range: 30 … 130 dB
  • Measurement accuracy: Based on class 2 according to IEC61672
  • Resolution: 0.1 dB
  • LC display
  • SD card memory up to 16 GB
  • external microphone
  • Analog output with 4 … 20-mA
Condition Monitoring Tachometer PCE-T 238-ICA Incl. ISO Calibration Certificate
£ 331.00
Price excl. VAT &. delivery
ISO Calibration
The condition monitoring tachometer is a battery-powered hand-held device that allows mobile use. The condition monitoring tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The condition monitoring tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

  • Continuous data output
  • Contactless measurement range: 5 … 99,999 RPM
  • Contact measurement range: 0.5 … 19,999 RPM
  • Surface measurement range: 0.05 … 1,999.9 m/min
  • Measuring distance without contact: 5 … 150 cm / 1.9" … 4.9 ft
  • Incl. ISO calibration certificate
Condition Monitoring 4-Channel Thermometer PCE-T 420
£ 349.00
Price excl. VAT &. delivery
High Accuracy
The Condition Monitoring 4-channel thermometer allows for the display and archiving of multiple temperature sensors simultaneously. It can be connected to up to 8 different types of thermocouples.

  • Measurement range from -200 … +1800 °C
  • High resolution of ± (0.04% of full scale + 0.3 K) for Type K
  • Connectable with 8 types of thermocouples
  • Thermocouple types: K, J, S, R, E, T, N, B
  • Storage for 10 million measurement values
  • Adjustable alarm limits
  • Equipped with 4 channels