Clamp Meter

Order no.: CA-MN39

Current transformers for multimeters, oscilloscopes and current faults, max. 200 A AC, max. Diameter 20 mm. With the high bandwidth of 10 kHz, the Clamp Meter MN series is designed for various applications such as fault current, power and harmonics measurements. The Clamp Meter MN series offers 3 choices for the output. In addition to AC and AC voltage, a DC voltage output is possible from the Clamp Meter MN series (delivered manufacturer calibrated - ISO certification as an option).


- Rated current: 200 A AC
- Output signal: AC voltage
- Output / input ratio: 100 mV / A AC, 10 mV / A AC
- Output: lead and isolated Ø 4 mm male plugs

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-PAC12

Current transformers for measuring current up to 600 A DC, 30 mm diameter, measuring range switch. The advantage of the current clamp meter adapter is that the line must not be separated. The current clamp adapter does not have a display. The measured data is output as voltage. The adapter CA-PAC10 is equipped with 4mm banana plugs. The clamp meter comes manufacturer calibrated.


- Measuring ranges AC: 0.2 ... 60 A / 0.5 ... 600 A (peak)
- Measuring ranges DC: 0.4 ... 60 A / 0.5 ... 600 A
- Bandwidth DC ... 10 kHz
- BNC connector
- Automatic zeroing 

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-MN60

Current transformers for multimeters, oscilloscopes and current faults, max. 200 A AC, max. Diameter 20 mm. With the high bandwidth of 10 kHz, the Clamp Meter MN series is designed for various applications such as fault current, power and harmonics measurements. The Clamp Meter MN series offers 3 choices for the output. In addition to AC and AC voltage, a DC voltage output is possible from the Clamp Meter MN series (delivered manufacturer calibrated - ISO certification as an option).


- Output signal: AC voltage
- Output / input ratio: 100 mV / A AC, 10 mV / A AC
- Output: coaxial cable and isolated BNC male plug

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C100

The Clamp Meter from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp Meter can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp Meter via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-MN71

Current transformers for multimeters, oscilloscopes and current faults, max. 200 A AC, max. Diameter 20 mm. With the high bandwidth of 10 kHz, the Clamp Meter MN series is designed for various applications such as fault current, power and harmonics measurements. The Clamp Meter MN series offers 3 choices for the output. In addition to AC and AC voltage, a DC voltage output is possible from the Clamp Meter MN series (delivered manufacturer calibrated - ISO certification as an option).


- Rated current: 10 A AC
- Output signal: AC voltage
- Output / input ratio: 100 mV / A AC
- Output: lead and isolated O 4 mm male plugs

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-Y4N

The Y-Series Clamp Meter Adapter is designed to be used with multimeters or oscilloscopes and can measure up to 600 A, with a maximum enclosure diameter of 30 mm (1.2 in). his universally applicable Clamp Meter Adapter does not need its own power supply, just connect the instrument with the test leads to the meter, removing the need to worry about the battery charge. The Clamp Meter Adapter comes manufacturer calibrated.
- Measuring range: 4 A ... 600 A AC
- Accuracy: 2%
- Transformer ratio (E:A): 1 A : 1 mV DC

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C102

The Clamp Meter from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp Meter can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp Meter via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in socket
- Output protected against voltage surges

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C103

The Clamp Meter from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp Meter can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp Meter via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in male plugs

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-MN73

Current transformers for multimeters, oscilloscopes and current faults, max. 200 A AC, max. Diameter 20 mm. With the high bandwidth of 10 kHz, the Clamp Meter MN series is designed for various applications such as fault current, power and harmonics measurements. The Clamp Meter MN series offers 3 choices for the output. In addition to AC and AC voltage, a DC voltage output is possible from the Clamp Meter MN series (delivered manufacturer calibrated - ISO certification as an option).


- Output signal: AC voltage
- Output / input ratio: 1,000 mV / A AC, 10 mV / A AC
- Output: lead and isolated Ø 4 mm male plugs

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C106

The Clamp Meter from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp Meter can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp Meter via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in socket
- Output: AC voltage

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C122

The Clamp Meter from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp Meter can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp Meter via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 1 A ... 1000 A
- Transformer Ratio: 1000 / 5
- Connection: 4 mm / 0.2 in sockets

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C107

The Clamp Meter from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp Meter can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp Meter via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in plug
- Output: AC voltage

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-E3N

The CA-E Series Clamp Meter for multimeters and oscilloscopes is a small current transformer with a clamp diameter of 8 mm (0.3 in) with a measuring range of 5 mA to a maximum of 150 A and a frequency range of up to 100 kHz.
- Measuring range: 0.05 A ... 100 A AC / DC
- Conversion ratio: 1 A / 10 mV
- BNC connector

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C112

The Clamp Meter from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp Meter can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp Meter via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 10 mA ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in sockets

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-Y3N

The Y-Series Clamp Meter Adapter is designed to be used with multimeters or oscilloscopes and can measure up to 600 A, with a maximum enclosure diameter of 30 mm (1.2 in). his universally applicable Clamp Meter Adapter does not need its own power supply, just connect the instrument with the test leads to the meter, removing the need to worry about the battery charge. The Clamp Meter Adapter comes manufacturer calibrated.
- Measuring range: 4 A ... 600 A AC
- Accuracy: 3%
- Transformer ratio (E:A): 100 : 1

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C113

The Clamp Meter from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp Meter can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp Meter via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 10 mA ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in plug

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-D33N

The CA-D33N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows for accurate AC current measurement even at currents up to 3000 A. Due to the rectangular shape, the D Series is particularly suitable for busbars and cables with a large cross section. The Clamp Meter adapter comes manufacturer calibrated with ISO certification as an option.
- Measuring range: 1 A to 3000 A
- Transformer Ratio: 1 A / 1 mA
- Connection: 4 mm / 1.6 in socket

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-Y7N

The Y-Series Clamp Meter Adapter is designed to be used with multimeters or oscilloscopes and can measure up to 600 A, with a maximum enclosure diameter of 30 mm (1.2 in). his universally applicable Clamp Meter Adapter does not need its own power supply, just connect the instrument with the test leads to the meter, removing the need to worry about the battery charge. The Clamp Meter Adapter comes manufacturer calibrated.
- Measuring range: 1 A ... 500 A AC
- Accuracy: ≤2%
- Transformer ratio (E:A): 1 A : 1 mV AC

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-D30N

The CA-D30N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp Meter is particularly suitable for busbars and cables with a large cross section.
- Measuring range: 1 A to 3000 A
- Transformer Ratio: 3 A / 1 mA
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-MA200-17

The CA-MA200-17 Mini Clamp Meter can measure AC currents from 0.5 A to 300 A with a 1 MHz bandwidth, and features a BNC connector for oscilloscopes. Whether the current is to be measured in control cabinets, junction boxes, or on tracks, the miniature CT MA 200, with its flexible current loop, is a way to measure the current with a bandwidth of 1 MHz. Thanks to the BNC output of the miniature CT MA 200 it may be directly connected to an oscilloscope. The test meter comes manufacturer calibrated with ISO certification as an option.
- Current Ranges: 30 A / 300 A
- Length of the loop: 17 cm / 6.7 in
- Enclosing diameter: 4.5 cm / 1.8 in
- CT ratio: 100 mV / A, 10 mV / A

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer