Automotive Tester

Order no.: PCE-VE 200-KIT1

PCE-VE 200 is a borescope or inspection camera for nondestructive evaluation (NDE) and machine diagnostics. The PCE-VE 200 borescope provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


Borescope
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs

Air Flow Meter
The air flow meter PCE-VA 20-set is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm large impeller head optimally.

- incl. Flow hood
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement
- HOLD function
- Low battery indicator 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 320HR

PCE-VE 320HR is an automotive tester, borescope, inspection camera or endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for better illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.

 

- Diameter camera head: Ø 5.5mm / 0.22"
- Cable length: 1 m / 3ft 3"
- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Interface: Mini-USB 1.1 und AV out
- Memory: 8 GB SD memory card (incl.)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LES 100-ICA

The PCE-LES 100-ICA automotive tester combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the automotive tester does not need periodic changing of bulbs. The automotive tester is sent to you calibrated (by the manufacturer PCE Instruments).


- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 333HR

PCE-VE 333HR is an automotive tester, borescope, inspection camera or endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for better illumination when using the mirrors. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.


- With boost function: better images in dark surroundings
- 2 additional side LEDs for better lighting
- Image rotation possible
- Diameter: Ø 6 mm / 0.24", length: 3 m / 9ft 10"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer automotive tester PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, paints, plastics ...) on steel / iron and non-ferrous metals.

- Measuring range: Fe: 0 ... 5000 μm, NFe: 0 ... 3000 μm
- For many materials such as:
- Iron
- Steel
- Aluminum
- Copper
- Brass
- Stainless steel
- Incl. ISO laboratory calibration with certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200UV

The Automotive Tester / Borescope PCE-VE 200UV has a dual LED illumination with UV light source and white light LED. The wavelength of the UV LED is in the UV-A range at 365 nm. Due to the switchable light source between UV light and white light LED as well as the possibility to use both light sources combined, the UV Automotive Tester / Borescope PCE-VE 200UV can be used very flexibly.

- Wavelength of the UV light source: 365 nm
- Camera head: Ø 10 mm / 0.39"
- Cable length: 1m  / 3ft 3"
Camera: front and side view
- Interface: Micro USB 2.0, TV out, Micro SD card slot
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 340N

PCE-VE 340N is an automotive tester, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.


- Diameter camera head: Ø 5.5mm / 0.22"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Cable length: 10 m / 32 ft 9"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 360N

PCE-VE 360N is a small-diameter automotive tester, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 3 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.

 

- 1 m / 3ft 3" camera cable with front camera
- 1 m / 3ft 3" camera cable with 90° side camera
- Diameter camera head: Ø 3.9 mm / 0.15"
- Interface: Mini-USB 1.1 and AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1 m / 3ft 3"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 350N

PCE-VE 350N is a two-way articulating automotive tester, borescope, inspection camera, videoscope or industrial endoscope for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head features 4 LED lights with automatic illumination. In addition, digital image magnification or zoom of up to 2 times is available.


- 6.0 mm / 0.24 in diameter
- 1 m / 3.28 ft long flexible cable
- 2-way articulating camera head bends 90° in each direction for 180° viewing


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SKM 1.0

The SKM 1.0 Automotive Tester precisely measures closing forces to prevent personal injuries. The closing Automotive Tester is suitable for measuring forces in the field of automatic doors, windows, and cut off walls; such as in warehouses, general stores, and public offices. The Automotive Tester is delivered manufacturer calibrated and can optionally be certified to ISO standards.


- Measurement range: 1000 N
- Resolution: 1 N
- Accuracy: ± 3 N
- External load cell

 

Manufacturer: HKM-Messtechnik GmbH
Test Instruments manufacturer
Order no.: PKH 2.0

PKH 2.0 Brake Pedal Force Automotive Tester is designed for the inspection of cars, trucks, automobiles and other vehicles. The Brake Pedal Force Automotive Tester makes the force measurement process quick and easy while delivering accurate, repeatable test results. In addition to brake pedals, this device can be used with parking brakes.


- Force measurement range: 1 … 1500 N
- Accuracy: 0.5 %
- Mechanical overload protection
- Ingress protection rating: IP65 (sensor)
- Includes handheld terminal

Manufacturer: HKM-Messtechnik GmbH
Test Instruments manufacturer
Order no.: Trummeter

The Automotive Tester Meter Trummeter is an electric device consisting of a measuring probe and a microprocessor to measure the belt tension and checking the strand force of a belt drive. A little impulse or touch will cause vibration. The Automotive Tester will detect the belts frequency and will get the F static clamping force through mass of the belt and the length of the free belt trum.


- Measuring range: 10 Hz ... 800 Hz
- Digital sample error: < 1%
- Display error: ± 1 Hz
- Force is displayed in Newtons, Hertz, or Foot Pounds

 

Manufacturer: Hilger u. Kern GmbH Industrieelektronik
Test Instruments manufacturer