Absolute Moisture Meter

Absolute Moisture Sensor PCE-MWM 200
£ 3,822.00
Price excl. VAT &. delivery

The moisture sensor is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture sensor is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).


  • Readability mass fraction of water: 0 … 100%
  • Moisture measurement range: ± 0.1 … 100% (water mass fraction))
  • Maximum permissible absolute error moisture measurement: Varies by material, lab test required
  • Temperature range: +5 … +80 °C

Absolute Moisture Meter PCE-UX 3031-ICA incl. ISO-Calibration Certificate
£ 3,943.00
Price excl. VAT &. delivery
ISO Calibration
Our Absolute Moisture Meter is a high-precision device that has been specially developed for plaster / gypsum analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables exact and reliable moisture measurements. The Absolute Moisture Meter works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.

  • Weighing range: 0 ... 220 g
  • Resolution: 0.001 g
  • Absolute moisture: 0 ... 100 %
  • Resolution: 0.01 %
  • Heating temperature 1: 40 ... 180 °C
  • Heating temperature 2: 105 ... 360 °C
  • % moisture
  • % dry matter
  • % moisture ATRO
  • g Residual weight / kg
  • Residual weight
  • Data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
  • incl. ISO-Calibration Certificate
Absolute Moisture Sensor PCE-MWM 210
£ 3,967.00
Price excl. VAT &. delivery

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


  • Measuring range: 0 … 100%
  • The maximum permissible error (absolute): Lab analysis of your sample determines % error
  • Temperature range: +5 … +80 °C  (+41 … +176 °F)
  • Questionnaire starts evaluation process  

Absolute Moisture Meter PCE-UX 3011GQD
£ 3,974.00
Price excl. VAT &. delivery
Our Absolute Moisture Meter is a precise device for determining dry matter Good Laboratory Practice content in samples. It is suitable for applications in raw material extraction, production, processing, storage, trade, research and recycling. With a maximum sample weight of 200 g and a high resolution of 0.001 g, the Absolute Moisture Meter enables exact measurements of the moisture content and the ash residue.

  • weighing range: 0 ... 200 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature: 105 ... 600 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • % residue on ignition
  • % loss on ignition
  • data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
  • with built-in printer
Absolute Moisture Meter PCE-UX 3011HQD
£ 3,974.00
Price excl. VAT &. delivery
Our Absolute Moisture Meter for temperature-insensitive materials up to 600 °C is Good Laboratory Practice various applications in raw material extraction, production, processing, research and recycling. With a maximum initial sample weight of 200 g and a high measuring resolution of 0.001 g, the Absolute Moisture Meter enables precise moisture measurement.

  • weighing range: 0 ... 200 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature: 105 ... 600 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • data interface: RS232, USB, V24
  • software Data Bridge (optional)
  • with built-in printer
Absolute Moisture Meter PCE-UX 3011GQD-ICA incl. ISO-Calibration Certificate
£ 4,090.00
Price excl. VAT &. delivery
ISO Calibration
Our Absolute Moisture Meter is a precise device for determining dry matter and ash content in samples. It is suitable for applications in raw material extraction, production, processing, storage, trade, research and recycling. With a maximum sample weight of 200 g and a high resolution of 0.001 g, the Absolute Moisture Meter enables exact measurements of the moisture content and the ash residue.

  • weighing range: 0 ... 200 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature: 105 ... 600 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • % residue on ignition
  • % loss on ignition
  • data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
  • with built-in printer
  • incl. ISO-Calibration Certificate
Absolute Moisture Meter PCE-UX 3011HQD-ICA incl. ISO-Calibration Certificate
£ 4,090.00
Price excl. VAT &. delivery
ISO Calibration
Our Absolute Moisture Meter for temperature-insensitive materials up to 600 °C is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum initial sample weight of 200 g and a high measuring resolution of 0.001 g, the Absolute Moisture Meter enables precise moisture measurement.

  • Weighing range: 0 ... 200 g
  • Resolution: 0.001 g
  • Absolute humidity: 0 ... 100 %
  • Resolution: 0.01 %
  • Heating temperature: 105 ... 600 °C
  • % moisture
  • % dry matter
  • % moisture ATRO
  • g Residual weight / kg
  • Residual weight
  • Data interface: RS232, USB, V24
  • Software Data Bridge (optional)
  • with built-in printer
  • incl. ISO-Calibration Certificate
Absolute Moisture Meter PCE-UX 3031D
£ 4,241.00
Price excl. VAT &. delivery
Our Absolute Moisture Meter is a high-precision device that has been specially Good Laboratory Practice plaster analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables precise and reliable moisture measurements. The Absolute Moisture Meter works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.

  • weighing range: 0 ... 220 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature 1: 40 ... 180 °C
  • heating temperature 2: 105 ... 360 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
  • with built-in printer
Absolute Moisture Meter PCE-UX 3031D-ICA incl. ISO-Calibration Certificate
£ 4,357.00
Price excl. VAT &. delivery
ISO Calibration
Our Absolute Moisture Meter is a high-precision device that has been specially developed for plaster analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables precise and reliable moisture measurements. The Absolute Moisture Meter works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.

  • Weighing range: 0 ... 220 g
  • Resolution: 0.001 g
  • Absolute moisture: 0 ... 100 %
  • Resolution: 0.01 %
  • Heating temperature 1: 40 ... 180 °C
  • Heating temperature 2: 105 ... 360 °C
  • % moisture
  • % dry matter
  • % moisture ATRO
  • g Residual weight / kg
  • Residual weight
  • Data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
  • with built-in printer
  • incl. ISO-Calibration Certificate