The flat miniature force gauge has a height of only 4 mm. With a diameter of 12 mm, this miniature force gauge is very compact. This force gauge achieves a measurement uncertainty of only 0.5%. 

• Rated load / force F.S.: 5-50 kg / 50-500 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force sensor nominal load selectable!

The flat miniature Force Gauge has a height of only 11 mm. With a diameter of 20 mm, this miniature Force Gauge is very compact. This Force Gauge achieves a measurement uncertainty of only 0.5%. 

• Rated load / force F.S.: 5-2000 kg / 50 N - 20 kN
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gauge nominal load selectable!

Thanks to its small dimensions, the miniature Force Gauge is easy to use on hard-to-reach measuring points. The height in particular is something special with this Force Gauge. With a diameter of only 10 mm, this Force Gauge is smaller in diameter than a 1 cent coin.

• Rated load / force F.S.: 5-100 kg / 50-1000 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gauge nominal load selectable!

A Force Gauge made of stainless steel with a measurement uncertainty of only 0.5%. With the dimensions of Ø 13 mm and a height of 7 mm, the Force Gauge is very versatile. 

• Rated load / force F.S.: 5-100 kg / 50-1000 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gauge nominal load selectable!

The miniature Force Gauge can be used in many applications due to its compact dimensions. With a small force application surface, the miniature force transducer enables force measurement at small contact surfaces.

• Rated load / force F.S.: 10-50 kg / 100-500 N
• Limit load / force: 150 %
• Breaking load / force: 200 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gauge nominal load selectable!

Our motorized force gauge can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force gauge lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force gauge offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 3,000 kg / 30 kN / 6,614 lbs
• Resolution: 1 kg / 10 N
• Minimum load: 10 kg
• Supplied with remote control indicator
• Incl. ISO calibration certificate

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• incl. software
• incl. force gauge PCE-DFG N 5K (0 … 5000 N)
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The force gauge measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our force gauges.

Force Gauge PCE-DFG N 5K

• Measuring range: 0 … 5000 N / 500 kg / 1100 lbs
• Resolution: 1N / 0.22 lbs
• Accuracy: ± 0.1% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic displayTest Stand PCE-MTS500
• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel path: max. 300 mm / 11.8"
• Feed speed: 30 mm/min … 230 mm/min / 1.18 … 9.05 in/min

The PCE-DDM 50 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

• Measurement range: 50,000 kg / 500 kN / 110,231 lbs
• Resolution: 20 kg / 200 N
• Units of measurement: kg / t / lbs / N / kN
• Supplied with remote control indicator

The PCE-DDM 50WI Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

• Measurement range: 50,000 kg / 500 kN / 110,231 lbs
• Resolution: 20 kg / 200 N
• Units of measurement: kg / t / lbs / N / kN
• Supplied without remote control indicator

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 20,000 kg / 200 kN / 44,092 lb
• Resolution: 10 kg / 100 N / 22 lb
• Minimum load: 200 kg / 440 lb
• Supplied with remote control indicator
• incl. ISO Calibration Certificate