Humidity Sensor PCE-P18-1

Order no.: PCE-P18-1

£ 115.00
£ 138.00
PCE-P18-1
price ex. (VAT / delivery)
Delivery time: 1-2 working days
Humidity sensor measures temperature and air humidity / output as standard signal / compact / Modbus RTU interface / wall fastening
The humidity sensor PCE-P18-1 can be used to monitor air humidity and temperature in HVAC engineering. The humidity sensor PCE-P18-1 releases the measured indicator as a standard signal 4…20 mA (not galvanic isolated). Air humidity and temperature are detected accurately due to a semiconductor. For operation the humidity sensor PCE-P18-1 is supplied via direct current. The measuring data is then shown via a two-wire line. All connections are made via screwed-contacts with water-proof IP 65 enclosure. The measuring data can be read through a RS485 interface. This feature is especially useful if different measuring points are to be connected during your building monitoring. For further information about the humidity sensor PCE-P18-1 please read the following technical data or use our contact form. Our engineers and technicians will gladly advise you regarding the humidity sensor PCE-P18-1 or any other of PCE Instruments product in the areas of regulation and control or scales and balances.

- Humidity- and temperature-sensor
- Simple wall fastening
- RS-485 interface
- For constant monitoring
- Different filters deliverable
- Small measuring
- Modbus RTU

Technical data humidity sensor PCE-P18
Humidity
Measuring range0 ... 100 %RH
Accuracy± 2 % (for range of 10 % .... 90 % RH)
± 3 % (residual range)
Hysteresis± 1 % RH
Temperature
Measuring range- 20 ... 60 °C
Accuracy± 0.5 % of measuring range
Temperature influence± 25 % / 10 °C
Output humidity sensor
Maximum suitable resistance at output≤ 500 Ω
Data interfaceRS-485 Modbus RTU
Mode of transmission8N1, 8N2, 8E1, 8O1
Signal rate4800 Bit/s
9600 Bit/s
19200 Bit/s
38400 Bit/s
57600 Bit/s
General technical data humidity sensor 
Voltage supply19 V ... 30 V DC
Power< 1.5 W
Surrounding temperature- 30 °C ... 85 °C
Max. air humidity≤ 95 % RH
Preheating time15 minutes
Protection gradeIP 65
Montagewall montage
Measures (AxHxD)35 x 58 x 118 mm
Weight125 g

Delivery content:
1 x humidity sensor PCE-P18-1
1 x instruction manual
Available variations of humidity sensor PCE-P18
Humidity sensor PCE-P18-1RS-485 Modbus interface

Humidity sensor PCE-P18-2

 Humidity sensor PCE-P18-3

RS-482 Modbus interface with 4…20 mA output

 RS-482 Modbus interface with 0...10 V output