The PCE-AT 5 automotive tester / handheld ignition-tachometer is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive ignition-tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.

• Measurement range: 100 … 20000 rpm
• Resolution: 1 rpm
• Accuracy: ± 10 rpm
• Measurement interval: 0.5 seconds

PCE-SG is an automotive tester or handheld refractometer used to determine the specific gravity (sg) of electrolyte solution batteries as well as the freezing point of propylene or ethylene glycol-based coolants in degrees Celsius (°C). This refractometer works well for measuring cleaning products too. The instrument also gives indication of the charge level in battery acid.

Measurement ranges:

• 50 … 0 °C for coolant or antifreeze1.15 … 1.30 sg for battery acid
• 40 … 0 °C for cleaner

PCE-180 CBN is a handheld, portable, battery-powered wire tracer or cable locator that consists of an amplifier probe and acoustic signal or tone generator. This locating device is designed to detect wires or cables hidden behind walls or insulation.

• Uses an acoustic signal to detect wires and cables, including  network and coaxial cables
• Features a 3-position toggle switch (and 3-color LED) for line  polarity, continuity and voltage testing
• Comes with red and black test leads with alligator clips

PCE-180 CBN is a handheld, portable, battery-powered wire tracer or cable locator that consists of an amplifier probe and acoustic signal or tone generator. This locating device is designed to detect wires or cables hidden behind walls or insulation.

• Uses an acoustic signal to detect wires and cables, including  network and coaxial cables
• Features a 3-position toggle switch (and 3-color LED) for line  polarity, continuity and voltage testing
• Comes with red and black test leads with alligator clips 

PCE-180 CBN is a handheld, portable, battery-powered wire tracer or cable locator that consists of an amplifier probe and acoustic signal or tone generator. This locating device is designed to detect wires or cables hidden behind walls or insulation.

• Uses an acoustic signal to detect wires and cables, including  network and coaxial cables
• Features a 3-position toggle switch (and 3-color LED) for line  polarity, continuity and voltage testing
• Comes with red and black test leads with alligator clips 

The PCE-AT 5 car measuring device - handheld ignition-tachometer is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive ignition-tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.

• Measurement range: 100 … 20000 rpm
• Resolution: 1 rpm
• Accuracy: ± 10 rpm
• Measurement interval: 0.5 seconds

Clamp on Tester for measuring AC current, AC voltage, DC current and frequency. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. The Clamp on Tester (as all the test instruments) comes manufacturer calibrated - ISO certification is available as an option.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC at 50 /  60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz / 0.51 to 1 kHz

The Condition Monitoring Rotation Meter is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The handheld automotive Condition Monitoring Rotation Meter features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.

• Measurement range: 100 … 20000 rpm
• Resolution: 1 rpm
• Accuracy: ± 10 rpm
• Measurement interval: 0.5 seconds

The PCE-ST 1 Contact Thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The contact thermometer is very easy to use, with small dimensions and short response time.

• Measuring range:  -40 … 250°C / -40 … 482°F
• Indication of max. and min. values
• Data function
• Lock for continuous operation
• Measured value in ºC or ºF

The Current Clamp has been designed to detect, indirectly, AC/DC current and frequency. The Current Clamp has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 100-mA / ±3.0% + 8 digits
• DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 /  60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The PCE-ST 1 Digital Thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The Digital Thermometer is very easy to use, with small dimensions and short response time.

• Measuring range:  -40 … 250°C / -40 … 482°F
• Indication of max. and min. values
• Data function
• Lock for continuous operation
• Measured value in ºC or ºF

The Electrical Tester has been designed to detect, indirectly, AC/DC current and frequency. The Electrical Tester has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz