- Incl. ISO Calibration Certificate

PCE-OM 15-ICA is an automotive tester with trigger functionality. This easy-to-use portable digital stroboscope gun features high / low range selection and push-button rate control to scale the flash rate slower (x½) and faster (x2). In addition, two knobs allow coarse and fine adjustment of the flash rate.

- Measuring range: 50 ... 30000 rpm
- Bright 6500K xenon light bulb
- 10 mm / 0.4 in 5-digit LCD
- Incl. ISO Calibration Certificate

The PCE-THB 38 pressure gauge is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the pressure gauge is sent out manufacturer calibrated. An ISO certification is available optionally.

The Barometric Pressure Meter records the air temperature as well as the relative humidity and the barometric pressure and saves them internally on an SD card. The compact device with a large memory (up to max. 16 GB SDHC card) is primarily used for long-term registration in the food sector (refrigerated counters in department stores, refrigerated transports, warehouses) as well as for measurement and recording in industry (heating and cooling processes, machine temperatures, product storage, etc.).

Measuring ranges
- Temperature: 0 ... 50 °C /  32 ... 122 °F
- Relative humidity: 10 ... 90% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar)
- Selectable pressure unit: hPa, mmHg and inHg
- Real-time data storage
- incl. ISO Calibration Certificate

The belt tension meter is an optical measuring instrument for determining the belt tension force. This belt tension meter consists of a display unit and a sensor on a gooseneck cable. The belt tension meter measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm
- incl. ISO Calibration Certificate

The belt tension meter is an optical measuring instrument for determining the belt tension force. This belt tension meter consists of a display unit and a sensor on a gooseneck cable. The belt tension meter measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 25 cm / 9,8 in
- incl. ISO Calibration Certificate

The Benchtop Scale PCE-BS 3000 is a light, rugged precision scale suitable for different purposes. The removable stainless steel pan allows the laboratory scale to be cleaned easily. The Benchtop Scale PCE-BS 3000 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 3000 g
- Readability (g): 0.1
- Repeatability (g): 0.1
- Calibratable
- Incl. ISO calibration certificate

Affordable Benchtop Scale. It can be calibrated with  (200 g), weighing units can also be selected, with piece counting function.

 

- Weighing capacity: 210 g
- power or battery use
- Automatic calibration
- Removable stainless steel weighing plate
- incl. ISO Calibration Certificate

 

 

The Benchtop Scale PCE-BS 300 is a light, rugged precision scale suitable for different purposes. The removable stainless steel pan allows the laboratory scale to be cleaned easily. The Benchtop Scale PCE-BS 300 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 300 g/ 0.66 lb/10.58 oz 
- Readability (g): 0.01
- Repeatability (g): 0.01
- Calibratable
- Incl. ISO calibration certificate

The Benchtop Scale PCE-BS 6000 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Compact Balance PCE-BS 6000 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 6000 g
- Readability: 1 g
- Repeatability: 1 g
- Accuracy: ± 3 g
- Calibratable
- Incl. ISO calibration certificate

 

PCE-BSH 10000 is a an accurate compact digital scale or balance with piece or part counting functionality. Ideal for use in kitchens, laboratories and offices, this precision scale has a USB port for data transfer and printing.

- Weighing unit selections: g, oz, lb, dwt, ozt, ct, tl.T, tl.H, tl.J, GN, dr, MM, ToLA,
  GSM, TAR, TMR
- Weighing range: 0.6 ... 10000 g / 0.0014 ... 22 lbs
- Readability or resolution: 0.2 g
- Accuracy: ± 0.6 g
- Calibratable
- Incl. ISO calibration certificate

PCE-BSH 6000 is a an accurate compact digital scale or balance with piece or part counting functionality. Ideal for use in kitchens, laboratories and offices, this precision scale has a USB port for data transfer and printing.

 

- Weighing unit selections: g, oz, lb, dwt, ozt, ct, tl.T, tl.H, tl.J, GN, dr, MM, ToLA,
  GSM, TAR, TMR
- Weighing range: 0.3 ... 6000 g / 0.00066 ... 13 lbs
- Readability or resolution: 0.1 g
- Accuracy: ± 0.3 g
- Calibratable
- Incl. ISO calibration certificate

The benchtop scale is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate

The Benchtop Scale PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the Benchtop Scale dries the material to be weighed, and then calculates the moisture content from the weight difference.

- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
- incl. ISO Calibration Certificate

PCE-MA 110 is a benchtop scale or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.

- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
- Incl. ISO calibration certificate

The Benchtop Scale PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The benchtop scale dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.

- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
- Accuracy to 0.01 %
- incl. ISO Calibration Certificate