Anemometer PCE-WSAC 50W 230-ICA incl ISO calibration certificate
£ 1,175.00
Price excl. VAT &. delivery
2 year Warranty

The anemometer PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safety purposes. Due to the integrated 4 … 20-mA analogue output of the anemometer, the measured data can also be transferred to other controllers for evaluation.


  • Measuring range up to 180 km / h
  • Input: Pulse, analogue (4 … 20-mA) or radio transmission
  • 4 … 20-mA analogue output
  • Supply voltage: 110 … 230V AC, 50/60 Hz
  • Ambient temperature -20 .. . 70°C / -4 … 158°F
  • Units adjustable: km / h, mph, m / s
  • Incl. ISO calibration certificate
Anemometer PCE-WSAC 50W 24-ICA Incl. ISO Calibration Certificate
£ 1,175.00
Price excl. VAT &. delivery
2 year Warranty

The anemometer PCE-WSAC 50W 24-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 … 20-mA analogue output of the anemometer, the measured data can also be transferred to other controllers for evaluation.


  • Measuring range up to 180 km / h
  • Input: pulse, analogue (4 … 20-mA) or radio transmission
  • 4 … 20-mA analog output
  • Supply voltage: 24V DC
  • Ambient temperature -20 … 70°C / -4 … 158°F
  • Units adjustable: km / h, mph, m / s 
  • Incl. ISO calibration certificate
Atmospheric Pressure Meter PCE-THB 38-ICA incl. ISO Calibration Certificate
£ 306.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-THB 38 atmospheric pressure meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the atmospheric pressure meter is sent out manufacturer calibrated. An ISO certification is available optionally.


  • Temperature: 0 … 50°C / 32 … 122°F
  • Relative air humidity: 10 … 95% r.h.
  • Barometric pressure: 10 … 1100 hPa (mbar) / 0.14 psi … 16 psi.
  • Dew point temperature: -25 … 49°C / -13 … 120°F
  • Incl. ISO calibration certificate
Automotive Material Thickness Tester PCE-CT 25FN-ICA incl. Certificate
£ 266.00
Price excl. VAT &. delivery
2 year Warranty

The automotive material thickness tester is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this automotive material thickness tester does not have to differentiate between ferrous and non-ferrous metal.

  • Measuring range:  0 … 1500 µm
  • Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
  • Measuring accuracy: ± (3% + 1 µm)
  • Resolution: 0.1 µm in the measuring range 0 … 100 µm                      1 µm in the measuring range> 100 µm
  • incl. ISO Calibration Certificate
Automotive Tester / Stroboscope PCE-LES 103-ICA incl. ISO-Calibration Certificate
£ 556.00
Price excl. VAT &. delivery
2 year Warranty
The motion analysis of rotating machines is quick and easy with our automotive tester / stroboscope. The automotive tester / stroboscope is equipped with 3 high-power LEDs, collectively producing a light intensity of 11,730 Lux at 20 cm / 1000 Hz. With the automotive tester / stroboscope, you can adjust the flash frequency in both FPM and Hz. Additionally, it is compact, portable, and operates independently thanks to the built-in battery. 
  • Flash frequency 60 … 300,000 FPM
  • Brightness 3 High Power LEDs
  • Accuracy: 0.003 % of the setting or ± 1 LSD
  • 6160 lux at 30 cm / 1000 Hz
  • Digital pulse width modulation
  • Phase shift - 360° … + 360°
  • Quick adjustment with x2 and ÷2 buttons
  • Intuitive control buttons
  • Clear display
  • incl. ISO-Calibration Certificate
Automotive Tester / Tachometer PCE-T 240-ICA incl. ISO Calibration Certificate
£ 365.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester / tachometer has a contact speed measurement. The measuring range of the contact speed measurement with the automotive tester / tachometer is 0.5 … 99,999 RPM. In addition to the contact measurement, the speed can also be measured optically with the automotive tester / tachometer.

  • Measuring range contacting: 0.5 … 99,999 RPM
  • Measuring range optical: 5 … 99,990 RPM
  • Temperature measurement: Type K, PT1000
  • Strobe for speed determination
  • Temperature measurement in °C and °F
  • incl. ISO Calibration Certificate
Automotive Tester / Tachometer PCE-T 260-ICA Incl. ISO Calibration Certificate
£ 466.00
Price excl. VAT &. delivery
2 year Warranty

The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the automotive tester also has the option of removing the rotational contacts and measuring temperatures.  

  • Optical tachometer
  • Measuring range: 5 … 99999 rpm
  • Contact tachometer
  • Stroboscope LED
  • Temperature measurement: Type K, PT 1000, Infrared
  • LED Flash frequency: 100 … 99990 FPM
  • Temperature measurement: Type K, PT 1000
  • Infrared
  • Incl. ISO calibration certificate (only for the tachometer function)

Automotive Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

  • Measuring range: 0 … 1250 µm
  • Accuracy: ± (1% + 1 µm)
  • Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
  • Measurement data storage for up to 500 data
  • Data transfer via Wifi and USB
  • Two different probes for NFe and Fe (included)
  • incl. ISO Calibration Certificate
Automotive Tester PCE-CT 22BT-ICA incl. ISO Calibration Certificate
£ 463.00
Price excl. VAT &. delivery
2 year Warranty

With this automotive tester, layer thicknesses on metallic surfaces can be reliably determined. The automotive tester has a measuring range of 1500 µm. This means that the automotive tester is used, for example, in a paint shop, for incoming goods inspection or for an expert.


  • Measuring range up to 1500 µm
  • Measurable substrates: Fe, NFe
  • Probe: internal
  • Micro USB and Bluetooth interface
  • Data storage for up to 600 measured values
  • incl. ISO Calibration Certificate

Automotive Tester PCE-CT 26FN-ICA Incl. ISO Calibration Certificate
£ 316.00
Price excl. VAT &. delivery
2 year Warranty
The PCE-CT 26FN automotive tester can measure non-destructive coatings (paints, plastics …) on steel / iron and non-ferrous metals. The PCE-CT 26FN automotive tester is ideally suited to immediately detect, for example, accident damage to the vehicle. 

  • Measuring range: 0 … 1250 μm / 0 …  49.2 mils 
  • Resolution: 1 μm / 0.039 mils
  • Accuracy: ± (3% + 2 μm / 0.079 mils)
  • Wear-resistant sensor
  • V-groove for measurement on pipes
  • Incl. ISO calibration certificate
Automotive Tester PCE-CT 29-ICA incl. iso calibration certificate
£ 471.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester has a measuring range of 0 … 2000 µm. The material tester can be used to measure the coating thickness on ferrous (Fe) and non-ferrous (NFe) metals.

  • Measuring range: 0 … 2000 µm
  • Temperature Measuring range: 0 … 50 °C 
  • Humidity Measuring range: 0 … 100 % r. h.
  • with SSPC measuring function 
  • Individually adjustable limit value alarms  
  • Data memory with up to 2500 measured values
  • incl. ISO Calibration Certificate
Automotive Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate
£ 921.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"- incl. ISO-Calibration Certificate
Automotive Tester PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate
£ 738.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
  • Accuracy after foil calibration: ±(1% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO Calibration Certificate
Automotive Tester PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate
£ 885.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO Calibration Certificate
Automotive Tester PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
£ 894.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Automotive Tester PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate
£ 907.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"- incl. ISO-Calibration Certificate
Automotive Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 912.00
Price excl. VAT &. delivery
2 year Warranty
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"- incl. ISO-Calibration Certificate
Automotive Tester PCE-CTI 10-ICA incl. ISO Calibration Certificate
£ 385.00
Price excl. VAT &. delivery
2 year Warranty

The automotive tester is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the automotive tester is inductive. To do this, the supply line is placed in the automotive tester.

  • Measuring range: 0 … 1500 V AC/DC
  • Free app for Android and iOS
  • Data logging for up to 100,000 measured values
  • Inrush current measurement
  • Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
  • incl. ISO Calibration Certificate