Order no.: PCE-IR 80-ICA
The temperature meter PCE-IR 80-ICA incl. ISO calibration certificate is used for quick control of the temperature of food. The temperature meter PCE-IR 80 is used in the area of ​​canteen kitchens, catering services, refrigerated warehouses and non-refrigerated warehouses. The temperature meter PCE-IR 80 has two types of measurement. On the one hand, the temperature meter PCE-IR 80 can measure the temperature of the object without contact via infrared. 

- Infrared measuring range: -35 ... 330°C / -31 ... 626°F
- Type of measurement puncture sensor measuring range: -20 ... 260°C / -4 ... 500°F
- Measurement spot ratio: 4: 1
- For frozen, cold and hot foods
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A-ICA

The PCE-313A condition monitoring thermometer measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A condition monitoring thermometer can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the condition monitoring thermometer to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GIR 10-ICA
The PCE-GIR 10-ICA incl. ISO calibration certificate condition monitoring thermometer is used to assist with maintenance and servicing in industry and craft. Thanks to the flexible gooseneck, the condition monitoring thermometer can also be used under difficult conditions. 

- Temperature measuring range: -50 ... 600°C / -58 ... 1112°F
- Measuring spot (measuring distance to measuring point size ): 8: 1
- Spectral sensitivity: 8 ... 14 μm
- Fixed emissivity 0.95
- Visible single-point laser beam
- Sensor on the gooseneck
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-COM 20

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR 100-ICA

PCE-IR 100-ICA incl. ISO calibration certificate is both an infrared non-contact thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.


- Infrared temperature range: -33 ... 220ºC / -27 ... 428ºF
- Probe temperature range: -55 ... 330ºC / -67 ... 626ºF
- Resolution: 0.2ºC / 0.36ºF
- IP 65 ingress protection rating allows hygienic cleaning

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR 100-ICA

PCE-IR 100-ICA incl. ISO calibration certificate is both an infrared non-contact thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.


- Infrared temperature range: -33 ... 220ºC / -27 ... 428ºF
- Probe temperature range: -55 ... 330ºC / -67 ... 626ºF
- Resolution: 0.2ºC / 0.36ºF
- IP 65 ingress protection rating allows hygienic cleaning

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR 80-ICA
The contact thermometer PCE-IR 80-ICA incl. ISO calibration certificate is used for quick control of the temperature of food. The contact thermometer PCE-IR 80 is used in the area of ​​canteen kitchens, catering services, refrigerated warehouses and non-refrigerated warehouses. The contact thermometer PCE-IR 80 has two types of measurement. On the one hand, the contact thermometer PCE-IR 80 can measure the temperature of the object without contact via infrared. 

- Infrared measuring range: -35 ... 330°C / -31 ... 626°F
- Type of measurement puncture sensor measuring range: -20 ... 260°C / -4 ... 500°F
- Measurement spot ratio: 4: 1
- For frozen, cold and hot foods
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228P-ICA
The pH value in cosmetics can be strictly and continuously monitored by the Cosmetics pH Meter PCE-228P. pH measurement in cosmetics ensures that the pH of the product matches skin pH, as well as ensuring excellent quality, and the correct viscosity, colour and odour for the best shelf-life. 

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Applications: Shampoo, pastes, paints, cosmetics
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH20P-ICA
This pH meter PCE-PH20P-ICA for cosmetics is portable, very easy to use, light in weight and easy to handle. The glass electrode ensures it is easy to keep clean. The pH value in cosmetics is strictly and continuously monitored, not only in the final product but in all stages of production.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Applications: Shampoo, pastes, Colors, cosmetics
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 10000N-ICA

PCE-CS 10000N-ICA is a digital battery-powered heavy-duty industrial crane, lifter, suspended or hanging scale, dynamometer, electronic balance or weighing hook that displays measurement values in kilograms (kg) or pounds (lbs). The scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 10000 kg / 22046 lbs ≈ 10 Tons
- Resolution: 5 kg
- Tare range: 100% full scale
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 1000N-ICA

PCE-CS 1000N-ICA is a digital, electronic, battery-powered crane scale that displays measurement values in kilograms (kg), pounds (lbs) and freely adjustable units. The scale includes a hook / shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 1000 kg / 2200 lbs ≈ 1 Ton
- Resolution: 0.2 kg / 0.4 lb
- Tare range: 100% full scale
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 300-ICA

PCE-CS 300 is a digital, battery-powered Crane Scale for indoor use. The rugged design of the Crane Scale accommodates applications in rough industrial conditions as well as in fields such as food and hygiene.


- Maximum capacity: 300 kg / 661.39 lb
- Readability: 0.05 kg / 0.11 lbs
- TARE: Full range
- Power off screen reminder after 30 minutes of inactivity
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 3000N-ICA

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty crane scale that displays measurement values in kilograms (kg) or pounds (lbs). The crane scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
- Resolution: 0.5 kg
- Tare range: 100 % full scale
- Includes hook, shackle, and remote control
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 5000N-ICA

PCE-CS 5000N-ICA is a digital battery-powered Crane Scale that displays measurement values in kilograms (kg) or pounds (lbs). The Crane Scale includes a hook, shackle, remote control and ISO calibration certificate.


- Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
- Resolution: 1 kg
- Tare range: 100% full scale
- Includes ISO calibration certificate

Manufacturer: Gilsbach + Bach GmbH
Test Instruments manufacturer
Order no.: PCE-HS 150N-ICA

PCE-HS 150N is an affordable digital hanging scale, crane scale, weighing hook or electronic balance that offers quick, easy and accurate weighing of large objects, animals, fish and game. Simply mount the item to be weighed to the hook or snap hook (both hooks are included). Useful for forklift and industrial applications and as well as recreational fishing and hunting, the PCE-HS 150N digital hanging scale features:


- Weight range up to 150 kg / 330 lbs
- Battery operation (3 x AA 1.5 V batteries provided)
- Auto-off, power-saving function (can be deactivated, if preferred)
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HS 50N-ICA

PCE-HS 50N is an affordable digital hanging scale, crane scale, weighing hook or electronic balance that offers quick, easy and accurate weighing of large objects, animals, fish and game. Simply mount the item to be weighed to the hook or snap hook (both hooks are included). Useful for forklift and industrial applications and as well as recreational fishing and hunting, the PCE-HS 50N digital hanging scale features:


- Weight range up to 50 kg / 110 lbs
- Battery operation (3 x AA 1.5 V batteries provided)
- Auto-off, power-saving function (can be deactivated, if preferred)
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-123-ICA

PCE-123 is a current calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use current calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the current calibrator useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-360-ICA

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Voltage range: 50.0 V ... 600.0 V True RMS value
- Current range: 3.0 A ... 999.9 A True RMS value
- Includes clamps, clips, leads, PC software and data cable
- Data logger of 10,000,000 records at 5/10/30/60/120 second interval options
- For measurement in real time and over an extended time period up to 578 days @ 5 second sample rate
incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 3-ICA
The PCE-CM 3 current clamp is used for quick and easy AC measurements. For current measurement, the PCE-CM 3 current clamp is plugged over the live conductor. The current clamp PCE-CM 3 is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 40-ICA
The flexible current clamp PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible current clamp PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer