The Leeb Hardness Test Instrument PCE-900 measures the hardness of nine different metals using the Leeb rebound method. This means that with the hardness test instrument a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The hardness test instrument PCE-900 measures the metal hardness in 6 different hardness scales. 

• Measurement according to Leeb Rebound method
• Testing of HRC, HRB, HV, HB, HSD
• Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
• Accuracy: 0.80% / Repeatability: 1.10%
• Incl. type D Leeb probe
• Optional Software Available

• alternating voltage: 40 ... 400 V
• alternating current: 0 ... 80 A
• resolution: 0.01 V / 0.01 A
• active, apparent and reactive power
• electrical energy in Wh
• incl. app for Android
• 32 GB internal memory
• magnetic measuring adaptor

• Measuring range: -200 ... 1800°C / -328 ... 3272°F
• High accuracy: ± (0.04 % v.Mw. + 0.3 K) for type K
• Thermocouple types: K, J, S, R, E, T, N, B
• Memory for 10 million measured values
• Alarm limits adjustable
• 12 input channels
• PC software

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 hardness tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.

• Handheld device
• For Shore A measurements
• Single and Serial Measurements
• Data transfer to pc
• Incl. ISO Calibration Certificate

The PCE-DDD 10 shore hardness tester is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.

• Handheld device
• For Shore D measurements
• Single and Serial measurements
• Data transfer to PC
• Incl. ISO Calibration Certificate

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.

• Measuring geometry: 60° degree angle
• Measuring range: 0 … 300 GU
• Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
• Light source: D65
• Wave length: 400-700 nm
•  Incl. ISO calibration certificate
• Includes PC-compatible software for detailed analysis

The Leeb Surface Testing PCE-900 measures the hardness of nine different metals using the Leeb rebound method. This means that with the Surface Testing a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The Surface Testing PCE-900 measures the metal hardness in 6 different hardness scales. 

• Measurement according to Leeb Rebound method
• Testing of HRC, HRB, HV, HB, HSD
• Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
• Accuracy: 0.80% / Repeatability: 1.10%
• Incl. type D Leeb probe
• Optional Software Available

The Leeb Material Hardness Tester PCE-900 measures the hardness of nine different metals using the Leeb rebound method. This means that with the material hardness tester a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The Material Hardness Tester PCE-900 measures the metal hardness in 6 different hardness scales. 

• Measurement according to Leeb Rebound method
• Testing of HRC, HRB, HV, HB, HSD
• Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
• Accuracy: 0.80% / Repeatability: 1.10%
• Incl. type D Leeb probe
• Optional Software Available