The sound sensor is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. The sound sensor is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.

• Measuring range: 30 … 130 dB in 3 ranges
• Resolution: 0.1 dB
• Accuracy: ± 1.5 dB
• IP 54 ingress protection rating on transmitter

Medium-sized sensor pair for pipe diameters DN 15 … 100 / 20 … 108 mm. Suitable for flow measurement on medium-sized pipes. The sensors of the ultrasonic flow meter can be attached to ferrous pipes with the built-in magnets. Alternatively, the sensors can be mounted to the pipe with detachable cable ties. The temperature resistance is between -30 … 160 °C.

• Pipe diameter: DN 15 … 100 / 20 … 108 mm / 0.6 … 3.9 / 0.7 … 4.2"
• Temperature resistance: from -30 … 160 °C / -22 … 320 °F
• Dimension: 45 x 30 x 30 mm / 1.7 x 1.1 x 1.1"
• Important! If you order the sensor later, we need the PCE-TDS 200 hand-held unit,   in order to match the sensor to the hand-held unit!

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

The sound sensor consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the sound sensor is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (night clubs, public festivals, kart tracks …).

• Measuring range: 30 … 130 dB in three ranges
• Resolution: 0.1 dB
• Power supply: 24 V DC
• Relay output and control output
• Handle and wall bracket
• Analog output signal

The IoT sensor is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the IoT sensor can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.

• Current measurement up to 1000 A
• Cover of the measuring sockets
• Voltage measurement up to 600V
• Temperature measurement via 2 thermocouples
• Bluetooth interface
• incl. ISO Calibration Certificate

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

PT-100 temperature sensor with beveled tip

• Needle sensor / stainless steel
• Sensor: Pt 100
• Max.temperature: 240 °C / 464 °F
• Response time: 4 seconds
• Insertion area: 200 mm
• Diameter: 5mm
• Accuracy: According to IEC 751 class B
• 3-wire system
• Coiled cable, insulated
• Cable length: 1000 mm
• Cable end stripped

• up to 100 devices with 25 registers can be connected
• Configuration via webbrowser
• Interface: RS485, Ethernet
• Memory: 1 GB Flash
• additional inputs / outputs: digital input or relay output (selectable)