Products for 'Equipo de ensayo END PCE HT 450 ICA incl. certificado calibración '

£ 1,326.00

Price excl. VAT &. delivery

The durometer is an analog measuring device to determine concrete strength. The measuring method of the concrete durometer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the durometer. The resulting rebound enables the durometer to determine the strength of the concrete.

Nominal kinetic energy: 4.5 J
For high-strength concrete
Simple and quick operation
For determining concrete hardness
Schmidt principle

Material Tester PCE-HT-450

£ 1,326.00

Price excl. VAT &. delivery

The material tester is an analog measuring device to determine concrete strength. The measuring method of the material tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the material tester. The resulting rebound enables the material tester to determine the strength of the concrete.

Nominal kinetic energy: 4.5 J
For high-strength concrete
Simple and quick operation
For determining concrete hardness
Schmidt principle

Roll Hardness Tester PCE-HT-450

£ 1,326.00

Price excl. VAT &. delivery

The roll hardness tester is an analog measuring device to determine concrete strength. The measuring method of the roll hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the roll hardness tester. The resulting rebound enables the roll hardness tester to determine the strength of the concrete.

Nominal kinetic energy: 4.5 J
For high-strength concrete
Simple and quick operation
For determining concrete hardness
Schmidt principle

Concrete Hardness Tester PCE-HT-450

£ 1,326.00

Price excl. VAT &. delivery

The concrete hardness tester is an analog measuring device to determine concrete strength. The measuring method of the concrete hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete hardness tester. The resulting rebound enables the concrete hardness tester to determine the strength of the concrete.

Nominal kinetic energy: 4.5 J
For high-strength concrete
Simple and quick operation
For determining concrete hardness
Schmidt principle

Concrete Hardness Tester PCE-HT-450

£ 1,326.00

Price excl. VAT &. delivery

Nominal kinetic energy: 4.5 J
For high-strength concrete
Simple and quick operation
For determining concrete hardness
Schmidt principle

Concrete Rebound Test Hammer PCE-HT-450

£ 1,326.00

Price excl. VAT &. delivery

The concrete rebound test hammer is an analog measuring device to determine concrete strength. The measuring method of the concrete rebound test hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete rebound test hammer. The resulting rebound enables the concrete rebound test hammer to determine the strength of the concrete.

Nominal kinetic energy: 4.5 J
For high-strength concrete
Simple and quick operation
For determining concrete hardness
Schmidt principle

NDT Tester - Hardness Tester PCE-HT-450

£ 1,326.00

Price excl. VAT &. delivery

The NDT tester - hardness tester is an analog measuring device to determine concrete strength. The measuring method of the NDT tester - hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the NDT tester - hardness tester. The resulting rebound enables the NDT tester - hardness tester to determine the strength of the concrete.

Nominal kinetic energy: 4.5 J
For high-strength concrete
Simple and quick operation
For determining concrete hardness
Schmidt principle

Surface Testing - Concrete Hammer PCE-HT-450

£ 1,326.00

Price excl. VAT &. delivery

The surface testing - concrete hammer is an analog measuring device to determine concrete strength. The measuring method of the surface testing - concrete hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the surface testing - concrete hammer. The resulting rebound enables the surface testing - concrete hammer to determine the strength of the concrete.

Nominal kinetic energy: 4.5 J
For high-strength concrete
Simple and quick operation
For determining concrete hardness
Schmidt principle

Wall Thickness Gauge PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery

The ultrasonic wall thickness gauges can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic wall thickness gauges.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

Ultrasonic testing device PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery

The Ultrasonic testing device can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic testing device.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

NDT Tester - Thickness Meter PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery

The NDT tester - thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the NDT tester - thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

Thickness Gauge PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery

The thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness gauge.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

Ultrasonic Thickness Tester PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery

The ultrasonic thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic thickness tester.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

Wall Thickness Gauge PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery

The wall thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the wall thickness gauge.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

Material Thickness Meter PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery

The material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the material thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

Thickness Meter PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery

The thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

Condition Monitoring Material Thickness Meter PCE-TG 150 HT-ICA incl. Certificate

£ 953.00

Price excl. VAT &. delivery

The condition monitoring material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the condition monitoring material thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

NDT Tester - Thickness Meter PCE-TG 150A HT-ICA incl. ISO-calibration certificate

£ 958.00

Price excl. VAT &. delivery

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C
- incl. ISO-calibration certificate