The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

The multi-parameter photometer is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter photometer. With this multi-parameter photometer it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter. With this multi-parameter pH meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

The multi-parameter IoT sensor is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter IoT sensor. With this multi-parameter IoT sensor it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness

The closing force measuring device is a wireless, electronic measuring device for rail vehicle doors and sliding steps. The closing force measuring device is a further development of the tried and tested BIA 600 measuring device.

- Measuring range: 0 ... 700 N
- Accuracy: +/- 3 N (0-100 N), +/- 3 % (>100 N)
- User guidance and evaluation according to EN 14752:2015,
   EN 14752:2005 (optional)
- Interface: Bluetooth
- App downloadable from Google Play Store
- incl. ISO calibration certificate

The closing force measuring device is an electronic measuring device for rail vehicle doors. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments.

- Measuring range: 0 ... 700 N
- Accuracy: +/- 3N (0-100N), +/- 3% (>100N)
- Professional PC software PinchPilot
- Precise measurements
- Robust design
- Applicable standards DIN EN 14752:2015, DIN EN 14752:2005 (optional)
- LabView
- incl. ISO calibration certificate

- Measuring range: 0 ... 750 N
- Stiffness: 25 N/mm
- Accuracy: +/- 3N or 3% of reading
- Memory for 100 measurements
- App downloadable in Google Play Store
- Bluetooth interface
- Wireless
- Standards - EN 81-1, EN 81-2, EN 81-20:2014, EN 81-50:2015, EN 14120
- incl. ISO calibration certificate

With the PCE-DLT 10 test stand, the water vapour resistance of samples is tested according to AMK-MB-005 Issued on 04/2015 Humidity and Climatic Resistance Test Module 1 (water vapour loading).

- Steam test according to AMK-MB-05
- Max. 5 test specimens
- Automatic test sequence with constant temperature
- Data logger
- Determination of moisture expansion
- Checking of joint formation and edge release

 

The closing force measuring device is an electronic measuring device for elevator doors and protective devices on machines. Typical use is both the final acceptance of new systems and regular inspection.

- Measuring range: 0 ... 750 N
- Stiffness: 25 N/mm
- Accuracy: +/- 3N or 3% of reading
- Memory for 100 measurements
- Precise measurements
- Robust design
- Standards - EN 81-1, EN 81-2, EN 81-20:2014, EN 81-50:2015, EN 14120
- incl. ISO calibration certificate

The BIA-1 BT closing force transducer is a wireless, electronic closing force measuring device for rail vehicle and bus doors and sliding steps. The closing force transducer is a further development of the tried and tested closing force measuring device Original BIA Class 1.

- Measuring range: 25 ... 310 N
- Stiffness: 10 N/mm
- Accuracy: +/- 3N or 3% of reading
- PC evaluation software PinchPilot
- Force Meter App (downloadable from Google Play Store)
-Wireless
Norms:
-EN14752:2005
- VDV 111
- VDV 157
- 2001/85/EC
- § 35 E, paragraph 5 StVZO
- ISO calibration certificate

The closing force measuring device is an electronic measuring device for power-operated windows, sliding roofs and doors in the automotive sector and for sliding steps in the rail vehicle sector.

- Measuring range: 0 ... 600 N
- Accuracy: +/- 3N (0-100N) +/- 3% (>100N)
- PC evaluation software PinchPilot
- Memory for 100 measurements
- Applicable standards – 2000/4/EC or user defined
- incl. ISO calibration certificate

The closing force measuring device is an electronic force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: 0 ... 75 N
- Spring stiffness: 5 N/mm
- Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
- Memory for 100 measurements
- Cable length: 1.5 m / 4.9 ft
- Lithium polymer battery
- incl. ISO calibration certificate

The closing force transducer is an electronic closing force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: 0 ... 150 N
- Spring stiffness: 10 N/mm
- Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
- Memory for 100 measurements
- Cable length: 1.5 m / 4.9 ft
- Lithium polymer battery
- Support of relevant standards - 2000/4 EG
- incl. ISO calibration certificate

The closing force transducer is an electronic closing force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

- Measuring range: 0 ... 50 N
- Spring stiffness: 2 N/mm
- Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
- Memory for 100 measurements
- Cable length: 1.5 m / 4.9 ft
- Lithium polymer battery
- incl. ISO calibration certificate

The closing force measuring device is a wireless, electronic measuring device for externally powered doors and gates. Typical use is the final inspection of new systems as well as regular inspections.

- Measuring range: 0 ... 2000 N
- Stiffness: 500 N/mm
- Accuracy: +/- 3N or 3% of reading
- Wireless
- App Force Meter available for download
- PC evaluation software PinchPilot
User guidance and evaluation according to:
- ASR 1.7
- DIN EN 12453:2017
- DIN EN 16005:2012
- DIN 18650-1:2010
- DHF-TS-011:2018
- 2006/42/EC Machinery Directive
- incl. ISO calibration certificate

The original BIA class 1 closing force measuring device is an electronic closing force measuring device for rail vehicle and bus doors and sliding steps. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments.

- Measuring range: 25 ... 310 N
- Stiffness: 10 N/mm
- Accuracy: +/- 3N or 3% of reading
- Memory for 100 measurements
- Sensor and PC interface
- Applicable standards: EN 14752:2005, VDV 111, VDV 157, 2001/85/EG
- incl. evaluation software PinchPilot
- incl. display unit SEB2
- incl. ISO calibration certificate

The Absolute Moisture Meter FMW-B determines moisture content by means of the capacitive method. With the Absolute Moisture Meter an electromagnetic field quickly determines capacitance of wood. All test instruments come manufacturer calibrated.

- Test / Measurement range: 2 ... 30 % H2O wood / 0 ... 60 %
   building materials
- Resolution: 0.1 %  / Accuracy: ±0.5 % of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement