Anemometer with 0 ... 10 V output. Anemometer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Climate meter with 0 ... 10 V output. Climate meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Environmental meter with 0 ... 10 V output. Environmental meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Environmental tester with 0 ... 10 V output. Environmental tester for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Weather station with 0 ... 10 V output. Weather station for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Wind measurer with 0 ... 10 V output. Wind measurer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Wind speed alarm / wind alarm controller with 0 ... 10 V output. Wind speed alarm / wind alarm controller for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Wind speed meter with 0 ... 10 V output. Wind speed meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

The Gasmaster GM-4 gas leak detector is a reliable, stationary warning device for gases. To connect a gas sensor, the gas measuring device is optionally supplied with a 4 - 20 mA or an mV signal input. The signal input has two alarm relays with which the gas leak detector can control signal lamps/horns or fans, for example.

- 4 inputs for a gas sensor
- Adaptation of gas sensors: O2, O3, CO, CO2, NH3, H2S
- Various combinations possible
- Event logging
- Large, backlit LCD display
- A/V alarm device max. 24V DC 650 mA
- Gas sensors optional

The humidity / temperature / CO2 / CO data logger has a CO² measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the data logger also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor.

- Carbon monoxide (CO): 0 … 1000 ppm
- Carbon dioxide (CO²): 0 … 9999 ppm
- Temperature: 0 … 50 °C / 32 … 122 °F
- Humidity: 0 … 100% RH
- Data memory for 5000 measuring points
- Data export CSV
- Power supply: rechargeable battery

The Gasmaster GM-1 gas leak detector is a reliable, stationary warning device for gases. To connect a gas sensor, the gas measuring device is optionally supplied with a 4 - 20 mA or an mV signal input. The signal input has two alarm relays with which the gas leak detector can control signal lamps/horns or fans, for example.

- 1 input for a gas sensor
- Adaptation of gas sensors: O2, O3, CO, CO2, NH3, H2S
- Various combinations possible
- Event logging
- Large, backlit LCD display
- A/V alarm device max. 24V DC 650 mA
- Gas sensors optional

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / Triple alarm-signaling / No service or calibration necessary / Self-testing function / CO, H2S or O2.

- Single-use Gas Leak Detector for CO
- 24 months continuous operation time / detection time
- Optic, acoustic, and haptic alarm
- Adjustable alarm levels
- 0 ... 300 ppm

 

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / Triple alarm-signaling / No service or calibration necessary / Self-testing function / CO, H2S or O2.

- Single-use Gas Leak Detector for CO
- 24 months continuous operation time / detection time
- Optic, acoustic, and haptic alarm
- Adjustable alarm levels
- 0 ... 300 ppm

 

Single-use Carbon Dioxide Meter Clip and Clip+ with 24- or 36-month lifetime / Triple alarm-signaling / No service or calibration necessary / Self-testing function / CO, H2S or O2.

- Single-use Gas Leak Detector for CO
- 24 months continuous operation time / detection time
- Optic, acoustic, and haptic alarm
- Adjustable alarm levels
- 0 ... 300 ppm

 

Mobile Floor Scale with 3 ranges, weight range up to 2,000 kg.

- Two ranges for high accuracy
- Accuracy ±0.05 % of current value
- Large display 25 mm removable
- Automatic calculation of the tare, manual insert of tare, adder function

 

The flat miniature force sensor has a height of only 4 mm. With a diameter of 12 mm, this miniature force sensor is very compact. This force sensor achieves a measurement uncertainty of only 0.5%. 

 

- Rated load / force F.S.: 5-50 kg / 50-500 N
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

The flat miniature force gage has a height of only 4 mm. With a diameter of 12 mm, this miniature force gauge is very compact. This force gauge achieves a measurement uncertainty of only 0.5%. 

 

- Rated load / force F.S.: 5-50 kg / 50-500 N
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

The flat miniature force gauge has a height of only 4 mm. With a diameter of 12 mm, this miniature force gauge is very compact. This force gauge achieves a measurement uncertainty of only 0.5%. 

 

- Rated load / force F.S.: 5-50 kg / 50-500 N
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!