PCE-PST 1 adhesion tester is designed to check the adhesive force of edges and edge bands on support materials. With the adhesion tester, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.

- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

PCE-PST 1 tension dynamometer is designed to check the adhesive force of edges and edge bands on support materials. With the tension dynamometer, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.

- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

The legal for trade scale with the dimensions 1 x 2 m are provided with an additional cage structure for animal weighing. Because the cage can be opened on both sides, the legal for trade scale can also be used as a passage scale.

- Measuring range [Max]: 1500 kg / 3306 lb
- Verification value [e]: 0.5 kg / 1.1 lb
- Cage internal dimensions [WxD]: 900 x 2000 mm / 35.4 x 78.7"
- Interface: USB-B (bidirectional)
- Battery and mains operation possible
- Incl. verification (conformity-assessed)

The legal for trade scale with the dimensions 1 x 2 m are provided with an additional cage structure for animal weighing. Because the cage can be opened on both sides, the legal for trade scale can also be used as a passage scale.

- Measuring range [Max]: 3000 kg / 6613 lb
- Verification value [e]: 1 kg / 2.2 lb
- Cage internal dimensions [WxD]: 900 x 2000 mm / 35.4 x 78.7"
- Interface: USB-B (bidirectional)
- Battery and mains operation possible
- Incl. verification (conformity-assessed)

Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gauge
Digital force gauge for tensile force measurement and compressive force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
- incl. software
- incl. force gauge PCE-DFG N 5K (0 ... 5000 N)

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL₂, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Chlorine, CL₂, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

The floor scale with the dimensions 1 x 2 m are provided with an additional cage structure for animal weighing. Because the cage can be opened on both sides, the floor scale can also be used as a passage scale.

- Measuring range [Max]: 1500 kg / 3306 lb
- Verification value [e]: 0.5 kg / 1.1 lb
- Cage internal dimensions [WxD]: 900 x 2000 mm / 35.4 x 78.7"
- Interface: USB-B (bidirectional)
- Battery and mains operation possible
- Incl. verification (conformity-assessed)

The moisture sensor is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture sensor is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).

- Readability mass fraction of water: 0 ... 100%
- Moisture measurement range: ± 0.1 ... 100% (water mass fraction))
- Maximum permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +80 °C

The humidity detector is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our humidity detector is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).

- Readability mass fraction of water: 0 ... 100%
- Moisture measurement range: ± 0.1 ... 100% (water mass fraction))
- Maximum permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +80 °C

The moisture meter is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture meter is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).

- Readability mass fraction of water: 0 ... 100%
- Moisture measurement range: ± 0.1 ... 100% (water mass fraction)
- Maximum permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +80 °C

The moisture analyzer is a sensor for measuring moisture of sand and liquids consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture analyzer is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, and fuels (CWF).

- Readability mass fraction of water: 0 ... 100%
- Moisture measurement range: ± 0.1 ... 10% (water mass fraction))
- Maximum permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +80 °C

The force gauge measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our force gauges.

Force Gauge PCE-DFG N 5K
- Measuring range: 0 ... 5000 N / 500 kg / 1100 lbs
- Resolution: 1N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Test Stand PCE-MTS500
- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel path: max. 300 mm / 11.8"
- Feed speed: 30 mm/min ... 230 mm/min / 1.18 ... 9.05 in/min