- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate

Our motorized force gauge can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force gauge lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force gauge offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The Xgard-1-SO2 is a single-gas Gas Leak Detector used to warn for gases (Sulfur Dioxide, SO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The air humidity meter has a CO² measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the air humidity meter also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor.

- Carbon monoxide (CO): 0 … 1000 ppm
- Carbon dioxide (CO²): 0 … 9999 ppm
- Temperature: 0 … 50 °C / 32 … 122 °F
- Humidity: 0 … 100% RH
- Data memory for 5000 measuring points
- Data export CSV
- Power supply: rechargeable battery

The hygrometer has a CO² measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the hygrometer also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor.

- Carbon monoxide (CO): 0 … 1000 ppm
- Carbon dioxide (CO²): 0 … 9999 ppm
- Temperature: 0 … 50 °C / 32 … 122 °F
- Humidity: 0 … 100% RH
- Data memory for 5000 measuring points
- Data export CSV
- Power supply: rechargeable battery

PCE-PST 1 tension dynamometer is designed to check the adhesive force of edges and edge bands on support materials. With the tension dynamometer, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.

- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m/min 

 

The moisture sensor is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture sensor is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).

- Readability mass fraction of water: 0 ... 100%
- Moisture measurement range: ± 0.1 ... 100% (water mass fraction))
- Maximum permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +76 °C

The moisture analyzer is a sensor for measuring moisture of sand and liquids consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture analyzer is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, and fuels (CWF).

- Readability mass fraction of water: 0 ... 100 %
- Moisture measurement range: 0.1 ... 100 % 
  water content in sand and liquids (water mass fraction)
- Max. permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +80 °C

PCE-PST 1 adhesion tester is designed to check the adhesive force of edges and edge bands on support materials. With the adhesion tester, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.

- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

PCE-PST 1 Edge Band Tester is designed to check the adhesive force of edges and edge bands on support materials. With the edge band tester, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.

- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

PCE-PST 1 force gage is designed to check the adhesive force of edges and edge bands on support materials. With the force gage, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.

- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min