Products for 'Temperature signal converter UMU 100 R with relay '

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

The NDT test instrument sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative NDT test instrument not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

Measurement range: -1677700 µs to +1677700 µs
Resolution: 0.05 µs
Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
Includes a camera for measuring crack width
Bandwidth: 1 to 500 kHz
Display: 10.1" TFT touchscreen display
Internal storage: 8 GB

Ultrasonic Tester / Ultrasonic Testing PCE-UCD 100

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic tester / ultrasonic testing sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this ultrasonic tester / ultrasonic testing enables accurate verification of concrete piles, concrete beams, and other components. This innovative ultrasonic tester / ultrasonic testing not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

Measurement range: -1677700 µs to +1677700 µs
Resolution: 0.05 µs
Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
Includes a camera for measuring crack width
Bandwidth: 1 to 500 kHz
Display: 10.1" TFT touchscreen display
Internal storage: 8 GB

Voltage Signal Converter PCE-SCI-U

£ 143.00

Price excl. VAT &. delivery
2 year Warranty

The voltage signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the voltage signal converter are completely galvanically isolated.

Over 100 combinations pre-selected
Converts analogue input range
Completely galvanic isolation
Power supply 18 … 265V AC / DC

Environmental Tester PCE-LMD 100

£ 3,320.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental tester guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

Measurement range: 0.00 … 50000 cd/m²
Resolution: 0.01 cd/m²
Accuracy class: A in accordance with DIN 5032-7

External sensor with multifunction button
8 GB measured value memory

Current Signal Converter PCE-SCI-U

£ 143.00

Price excl. VAT &. delivery
2 year Warranty

The current signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the current signal converter are completely galvanically isolated.

Over 100 combinations pre-selected
Converts analogue input range
Completely galvanic isolation
Power supply 18 … 265V AC / DC

Illuminometer PCE-LMD 100

£ 3,320.00

Price excl. VAT &. delivery
2 year Warranty

The illuminometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The illuminometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

Measurement range: 0.00 … 50000 cd/m²
Resolution: 0.01 cd/m²
Accuracy class: A in accordance with DIN 5032-7

External sensor with multifunction button
8 GB measured value memory

Photometer PCE-LMD 100

£ 3,320.00

Price excl. VAT &. delivery
2 year Warranty

The photometer is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The photometer guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

Measurement range: 0.00 … 50000 cd/m²
Resolution: 0.01 cd/m²
Accuracy class: A in accordance with DIN 5032-7

External sensor with multifunction button
8 GB measured value memory

Voltage Signal Converter PCE-SCI-E

£ 177.00

Price excl. VAT &. delivery
2 year Warranty

The voltage signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

Measuring range 0 … 600 V AC/DC
Active and passive output signal
Display and keypad for configuration
Frequency measurement
DIN rail mounting
Display

Redox-Meter PCE-228-R

£ 332.00

Price excl. VAT &. delivery
2 year Warranty

PCE-288-R Redox Meter is a very easy to use meter to measure mV /pH / ºC. In the PC-228-R Redox Meter values can be directly stored in the SD memory card (Excel format) or can be directly transferred in real time to a PC or laptop by means of the RS-232 interface.

Good quality at an affordable price
SD memory card (1 … 16 GB)
Values are directly stored in Excel format in the SD memory card (any additional software is required)
RS-232 interface for real time data transference

Environmental Meter PCE-LMD 100

£ 3,320.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

Measurement range: 0.00 … 50000 cd/m²
Resolution: 0.01 cd/m²
Accuracy class: A in accordance with DIN 5032-7

External sensor with multifunction button
8 GB measured value memory

Lux Meter PCE-LMD 100

£ 3,320.00

Price excl. VAT &. delivery
2 year Warranty

The lux meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The lux meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

Measurement range: 0.00 … 50000 cd/m²
Resolution: 0.01 cd/m²
Accuracy class: A in accordance with DIN 5032-7

External sensor with multifunction button
8 GB measured value memory

Radiation Detector PCE-LMD 100

£ 3,320.00

Price excl. VAT &. delivery
2 year Warranty

Measurement range: 0.00 … 50000 cd/m²
Resolution: 0.01 cd/m²
Accuracy class: A in accordance with DIN 5032-7

External sensor with multifunction button
8 GB measured value memory

Luminance Meter PCE-LMD 100

£ 3,320.00

Price excl. VAT &. delivery
2 year Warranty

The luminance meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The luminance meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

Measurement range: 0.00 … 50000 cd/m²
Resolution: 0.01 cd/m²
Accuracy class: A in accordance with DIN 5032-7

External sensor with multifunction button
8 GB measured value memory

Air Quality Carbon Dioxide Meter PCE-WMM 100-ICA incl. ISO Calibration Cert.

£ 800.00

Price excl. VAT &. delivery
2 year Warranty

The Air Quality Carbon Dioxide Meter PCE-WMM 100-ICA consists of a main unit and a remote display. The air quality carbon dioxide meter is used to measure carbon dioxide and oxygen in a fixed location. The air quality carbon dioxide meter has two relays that can be used to control alarm lights or sounders.

Measuring range CO2: 0 … 50000 ppm
Measuring range O2: 0 … 30 %
Measuring range temperature: 0 … 50 °C / 32 … 122 °F
Main and remote unit
Alarm relay
4 … 20 mA analog outputs
Acoustic alarm
incl. ISO Calibration Certificate

Redox Meter PCE-PHD 1-R

£ 396.00

Price excl. VAT &. delivery
2 year Warranty

The redox meter PCE-PHD 1-R is a multifunction meter for checking water quality. The portable redox meter is very well suited for controlling the redox value in water.

Redox:1999 … 0 … 1999 mV
Real-time data logger
SD card memory (16 GB max.)
RS-232 interface for online data transmission
BNC connector
Electrode for redox included

Redox Meter PCE-PHD 1-R

£ 396.00

Price excl. VAT &. delivery
2 year Warranty

The redox meter PCE-PHD 1-R is a multifunction meter for checking water quality. The portable redox meter is very well suited for controlling the redox value in water.

Redox:1999 … 0 … 1999 mV
Real-time data logger
SD card memory (16 GB max.)
RS-232 interface for online data transmission
BNC connector
Electrode for redox included

Air Quality Carbon Dioxide Meter PCE-WMM 100

£ 711.00

Price excl. VAT &. delivery
2 year Warranty

The air quality carbon dioxide meter PCE-WMM 100 consists of a main unit and a remote display. The CO2 air quality meter PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The air quality carbon dioxide meter PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.

Measuring range CO2: 0 … 50000 ppm
Measuring range O2: 0 … 30 %
Measuring range temperature: 0 … 50 °C / 32 … 122 °F
Main and remote unit
Alarm relay
4 … 20 mA analog outputs
Acoustic alarm

Temperature Data Logger PCE-LTD 100

£ 213.00

Price excl. VAT &. delivery
2 year Warranty

The temperature data logger has a measuring range of -80 … +70 °C. The temperature data logger is therefore suitable for monitoring particularly cold environments.

Measuring range: -80 … +70 °C / -112 … +158 °F
Measurement accuracy: ± 0.5 °C (-30 … +70 °C / -22 … +158 °F)
Resolution: 0.1 °C
USB data logger for dry ice
Data export directly as PDF