The pressure sensor is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure sensor is versatile.

• Measuring range: 0 … 2900 psi, 0 … 200 bar
• Resolution: 1.45 psi, 0.1 bar
• Scaled bar graph
• Measurable media: gases, water
• incl. ISO Calibration Certificate

The pressure sensor is distinguished by the long battery life of 1800h. The rotatable housing and display completes the functionality of the pressure sensor. Thus, the pressure sensor is ideal for mobile applications, such as test beds.

• Up to 600 bar / 8702 psi
• Relative pressure
• Revolving 4.5 digit display
• Max-Min function
• Different units 

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

The PCE-VM 31-WB Human Vibration Recorder or Analyzer is designed for measuring human vibration at the workplace. The Vibration Recorder can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

• Measuring of human vibration at the workplace
• Velocity, acceleration, displacement
• 3 channel FFT
• TEDS support
• Includes whole-body sensor only - hand-arm sensor sold separately (see     accessories)

The PCE-VM 31-WB Tri-Axial Accelerometer or Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

• Measuring of human vibration at the workplace
• Velocity, acceleration, displacement
• 3 channel FFT
• TEDS support
• Includes whole-body sensor only - hand-arm sensor sold  separately (see accessories)

The PCE-VM 31-WB Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

• Measuring of human vibration at the workplace
• Velocity, acceleration, displacement
• 3 channel FFT
• TEDS support
• Includes whole-body sensor only - hand-arm sensor sold separately (see  accessories)

The PCE-VM 31-WB Human Vibration Meter or Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

• Measuring of human vibration at the workplace
• Velocity, acceleration, displacement
• 3 channel FFT
• TEDS support
• Includes whole-body sensor only - hand-arm sensor sold separately (see     accessories)

The PCE-VM 31-HA Human Vibration Recorder is designed for measuring human vibration at the workplace. The Vibration Recorder can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

• Measuring of human vibration at the workplace
• Velocity, acceleration, displacement
• 3 channel FFT
• TEDS support
• Includes hand-arm sensor only - whole-body sensor sold separately (see  accessories)

The stainless steel immersion pressure / fill level sensor is suitable for measuring the level in the process. The immersion probe is particularly suitable for level measurement of waste water, contaminated or highly viscous media.

• Nominal pressures up to 200 mH2O
• Accuracy ± 0.35% of the measuring range
• 39.5 mm diameter
• Suitable for drinking water production
• Ceramic sensor
• Suitable for dirty and viscous media
• Different configurations possible

The PCE-VM 31-HAWB Human Vibration Recorder is designed for measuring human vibration at the workplace. The Vibration Recorder can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Recorder that captures acceleration, velocity, and displacement measurements.

• Measuring of human vibration at the workplace
• Velocity, acceleration, displacement
• 3 channel FFT
• TEDS support

The PCE-VM 31-HA Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

• Measuring of human vibration at the workplace
• Velocity, acceleration, displacement
• 3 channel FFT
• TEDS support
• Includes hand-arm sensor only - whole-body sensor sold separately (see     accessories)

The PCE-VM 31-HA Human Vibration Meter is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

• Measuring of human vibration at the workplace
• Velocity, acceleration, displacement
• 3 channel FFT
• TEDS support
• Includes hand-arm sensor only - whole-body sensor sold separately (see  accessories)

The PCE-VM 31-HA Tri-Axial Accelerometer is designed for measuring human vibration at the workplace. The Accelerometer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

• Measuring of human vibration at the workplace
• Velocity, acceleration, displacement
• 3 channel FFT
• TEDS support
• Includes hand-arm sensor only - whole-body sensor sold  separately (see accessories)

The PCE-VM 31-HAWB Condition Monitoring Human Vibration Meter is designed for measuring human vibration at the workplace. The Condition Monitoring Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Meter that captures acceleration, velocity, and displacement measurements.

• Measuring of human vibration at the workplace
• Velocity, acceleration, displacement
• 3 channel FFT
• TEDS support