With this condition monitoring industrial borescope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the industrial borescope consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Camera resolution 160,000 pixels each
- Viewing angle front camera 120°, side camera 90°
- Focusing distance 5 … 50 mm / 0.19 ... 1.96" each
- Camera head length: 42 mm / 1.6"
- Bending radius at 90° 35 mm / 1.3"
- Live images from both cameras side by side
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

The magnetometer is used in the laboratory and quality assurance to measure the strength of magnetic fields. The magnetometer is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

 

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple

With this industrial borescope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the borescope consists of braided tungsten.

- Borescope camera cable length: 2 m / 6.5 ft
- Cable diameter: 6mm / 0.23"
- Direction of view of the camera frontal
- Camera resolution 1 million pixels
- Camera viewing angle 120°
- Focusing distance 10 … 100 mm / 0.39 … 3.9"
- Flexible camera head length 60 mm / 2.3"
- Radius at 90° bend 50 mm / 1.9"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

The PCE-PFG Durometer is a handy, digital measuring device for measuring tensile and compressive forces. The Durometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 50 N
- Resolution: 0.01 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø6mm / 0.23"
- Cable length: 5m / 16.4 ft
- Camera direction: 0°
- Resolution: 1MP
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

With this industrial borescope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the industrial borescope consists of braided tungsten.

- Diameter: Ø6mm / 0.23"
- Cable length: 5m / 16.4 ft
- Camera direction: 0°
- Resolution: 1MP
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple

The PCE-ITE 50 is a robust PAT Tester with a large 3.5" TFT color LCD display. The PAT Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

- 3.5" color TFT LCD display
- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- SD card and Bluetooth
- Dual display
- Good / bad FI test
- Low Ohm measurement
- Up to 1000V terminal voltage

The Anemometer PCE-WSAC 50-111 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 4 ... 20 mA
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-121 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 0 ... 10 V
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-211 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 4 ... 20 mA
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-221 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 0 ... 10 V
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-311 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-321 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 0 ... 10 V
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

With this automotive tester, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the automotive tester consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission