Products for 'Humidity Detector PCE RCM 12 '

£ 254.00

Price excl. VAT &. delivery
2 year Warranty

PCE-VA 20 is a humidity detector for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1

Air Humidity Meter PCE-RCM 8

£ 165.00

Price excl. VAT &. delivery
2 year Warranty

The air humidity meter performs many measuring tasks. For example, the air humidity meter can measure mass concentration, formaldehyde and TVOC. This air humidity meter is specially designed for indoor measurement.

- Formaldehyde in mg / m³
- Measurement of TVOC
- Temperature measurement
- Alarm function
- Mass concentration

Humidity Detector with Air Flow Hoods PCE-VA 20-SET

£ 404.00

Price excl. VAT &. delivery
2 year Warranty

PCE-VA 20-SET is a humidity detector with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.

Humidity Detector PCE-HWA 20BT-ICA incl. ISO Calibration Certificate

£ 329.00

Price excl. VAT &. delivery
2 year Warranty

The humidity detector has a measuring range of 0 ... 30 m/s. In addition to the air flow, the humidity detector can also measure the ambient temperature between -20 ... 60 °C / -4 ... 140 °F and the ambient humidity between 0 ... 100% RH.

- Wind speed measuring range: 0.00 ... 30.00 m/s / 98 ft/s / 67 mph
- Temperature measuring range: -20 ... 60 °C / -4 ... 140 °F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm / 0.47"
- 390 mm / 15.4" telescopic pole
- Bluetooth 4.0 interface
- incl. ISO Calibration Certificate (wind speed function only)

Humidity Detector PCE-HVAC 3S-ICA incl. ISO Calibration Certificate

£ 364.00

Price excl. VAT &. delivery
2 year Warranty

The humidity detector PCE-HVAC 3S-ICA is a multifunctional diagnostic device for climate testing. In addition to the ambient humidity and room temperature, the humidity detector also determines the dew point and wet bulb temperature in °C and °F.

- Measuring ranges
Air humidity: 0 ... 100% RH
Absolute humidity: 0 ... 500 g/m³
Temperature: -30 ... 100°C / -22 ... 212°F
Dew point temperature: -30 ... 100°C / -22 ... 212°F
Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
Humidity: ± 2% (40 ... 60% RH)
Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter
- Including ISO Calibration Certificate

Humidity Detector PCE-GMM 10

£ 228.00

Price excl. VAT &. delivery
2 year Warranty

The humidity detector is a compact moisture analyzer for up to 18 different cereals. This humidity detector is an important tool in mills, granaries or in processing industries of cereals and legumes.

- For 18 cereals
- Small amount of sample
- Temperature compensation: automatic

Gas Leak Detector PCE-LDC 20

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

- Units: bar, psi, MPa, l/min, m³/h, cfm

- Leak detection in compressed air, refrigerant
and gas systems

- Leakage assessment

- Various attachments

- Wireless headphones

- Frequency: 38 . .. 42 kHz

- Measurement rate: 1 Hz

- Memory capacity: 1 GB

Humidity Detector PCE-PMI 3

£ 225.00

Price excl. VAT &. delivery
2 year Warranty

The humidity detector is a small and reliable measuring instrument for the determination of existing moisture in, for example, concrete and wood. Corresponding scales for measuring moisture are already stored in the library of the moisture meter.

- Relative scale: 0.0 ... 99.9%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measurements on wood and concrete
- Individually adjustable alarm limits
- Setting in CM% possible
- Numerical and graphical view
- Results are delivered by Carbit method

Ultrasonic Leak Detector PCE-LDC 20

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

- Units: bar, psi, MPa, l/min, m³/h, cfm

- Leak detection in compressed air, refrigerant
and gas systems

- Leakage assessment

- Various attachments

- Wireless headphones

- Frequency: 38 . .. 42 kHz

- Measurement rate: 1 Hz

- Memory capacity: 1 GB

Humidity Detector PCE-VDL 16I

£ 222.00

Price excl. VAT &. delivery
2 year Warranty

The humidity detector PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this humidity detector is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz

- 32 GB SD memory card

- Evaluation software

- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in

- Temperature, Humidity, Air pressure, Vibration, and Light

Humidity Detector PCE-HVAC 3S

£ 227.00

Price excl. VAT &. delivery
2 year Warranty

The humidity detector PCE-HVAC 3S is a multifunctional diagnostic device for climate testing. In addition to the ambient humidity and room temperature, the humidity detector also determines the dew point and wet bulb temperature in °C and °F.

Air Humidity Meter PCE-RCM 05

£ 148.00

Price excl. VAT &. delivery
2 year Warranty

The air humidity meter is used to continuously measure the particulate matter content at the workplace. The air humidity meter displays PM2.5 particulate matter as well as temperature and humidity on the display.

- Measuring range PM2.5: 0 ... 500 μg / m³

- Measuring range temperature: -10 ... 50°C / 14 ... 122°F

- Measuring range humidity: 0 ... 99% rh

- Pictograms indicate air quality

- Battery operation

- Micro USB for charging

Humidity Detector PCE-CMM 10

£ 214.00

Price excl. VAT &. delivery
2 year Warranty

The Humidity Detector PCE-CMM 10 is a multi-function meter for measuring the air quality. This humidity detector measures synchronously the CO2 concentration, the air temperature and the humidity.

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep

Radiation Detector PCE-LMD 200-LD-KIT incl. luminance accessory

£ 3,070.00

Price excl. VAT &. delivery
2 year Warranty

The radiation detector is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the radiation detector is extremely versatile.

- Measuring range: 0.000 lx ... 500 klux
- Resolution: 0.001 lx

- Precision in accordance with DIN 5032-7

- Accuracy class: A

- External sensor

- 8 GB measured value memory
- incl. luminance accessory

Humidity Detector PCE-HWA 20BT

£ 200.00

Price excl. VAT &. delivery
2 year Warranty

The humidity detector has a measuring range of 0 ... 30 m / s. In addition to the air flow, the humidity detector can also measure the ambient temperature between -20 ... 60°C / -4 ... 140°F and the ambient humidity between 0 ... 100% RH.

- Wind speed measuring range: 0.00 ... 30.00 m / s
- Temperature measuring range: -20 ... 60°C / -4 ... 140° F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm
- 390 mm / 15.4 in telescopic pole
- Bluetooth 4.0 interface

Humidity Detector PCE-THT 10

£ 201.00

Price excl. VAT &. delivery
2 year Warranty

The humidity detector has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the humidity detector can be read directly on the 2.3" color display.

Temperature measurement
- Measuring range: -20 ... 60 °C / -4 ... 140 °F
Humidity measurement
- Measuring range: 0 ... 99.9% RH
- Data memory for 12800 measuring points
- For mounting on the wall
- WiFi interface

Datalogging Humidity Detector PCE-HT110-ICA incl. ISO Calibration Certificate

£ 346.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-HT110 Datalogging Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.

- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)
- Incl. ISO Calibration Certificate

Thermometer PCE-RCM 11

£ 311.00

Price excl. VAT &. delivery
2 year Warranty

The thermometer PCE-RCM 11 serves as an indicative test of environmental parameters. The thermometer PCE-RCM 11 enables the measurement of fine dust, temperature and relative humidity. The bright display of the thermometer provides information about the already mentioned parameters.

- Fine dust, formaldehyde, humidity, temperature, TVOC
- Particle size channels : PM 2.5 / PM 10
- Measuring range TVOC: 0.00 ... 9.99 mg / m³ (volatile organic compounds)
- Measuring range temperature: -20 ... 70°C / -4 ... 158°F
- Measuring range humidity: 0 ... 100% RH
- Measuring range formaldehyde: 0.00 ... 5.00 mg / m³
- Interface: USB
- For indicative measurements