Electrical Tester PCE-830-1
£ 2,133.00
Price excl. VAT &. delivery

The PCE-830 Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-6801 amp clamp (100 A)
  • Electrical conductor pick-up: 30 mm / 1.1 in diameter
  • Range selection: manual (1 A, 10 A, 100 A)
  • Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values (single phase)

Tension Dynamometer / Tension Load Cell PCE-PST 1 X
£ 2,811.00
Price excl. VAT &. delivery
The Tension Dynamometer / Tension Load Cell is a compact bench-top meter with an integrated load cell for the precise measurement of forces within the range 0 ... 500 N. The Tension Dynamometer / Tension Load Cell was specially developed for peel tests and enables a comprehensive assessment of the processing quality.

  • measurement range: 0 ... 500 N
  • resolution: 0.1 N
  • accuracy: ±0.05 % FS
  • sampling rate: 2 ... 100 Hz
  • traverse speed: 100 mm/min, 300 mm/min
  • traverse distance: 150 mm 
  • Measurable edge thickness: 0.4...3.5 mm
  • Measurable board thickness: 10...64 mm
  • graphical display
  • data logger
Single-Phase / 1-Phase Power Meter PCE-360
£ 1,491.00
Price excl. VAT &. delivery

The PCE-360 is a Single-Phase Power Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate

Single Phase / 1-Phase Power Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,759.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate
  • incl. ISO Calibration Certificate

Three Phase Power Data Logger PCE-PA 8300-1
£ 2,667.00
Price excl. VAT &. delivery

The easy-to-use PCE-PA 8300 Three Phase Power Data Logger is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


  • Voltage measurement range of 10 V … 600 V AC
  • Current measurement range of (Set 1) 20 A … 1200 A AC
  • Performance measurement range of 0 kW … 9.999 MW (VA/VAR)
  • Simultaneous display of harmonics and waveform
  • Graphic Phasor diagram
  • Captures transients including dip, swell, and outage

Portable Power Analyzer PCE-830-1
£ 2,133.00
Price excl. VAT &. delivery

The PCE-830 Portable Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Portable Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-6801 amp clamp (100 A)
  • Electrical conductor pick-up: 30 mm / 1.1 in diameter
  • Range selection: manual (1 A, 10 A, 100 A)
  • Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values (single phase)

Clamp Meter PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,559.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-830 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp Meter also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


  • PCE-830 + PCE-6801 amp clamp (100 A)
  • Electrical conductor pick-up: 30 mm diameter
  • Range selection: manual (1 A, 10 A, 100 A)
  • Clamp dimensions: 210 x 62 x 36 mm
  • Incl. ISO calibration certificate

Clamp on Tester PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,559.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-830 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp on Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


  • PCE-830 + PCE-6801 amp clamp (100 A)
  • Electrical conductor pick-up: 30 mm diameter
  • Range selection: manual (1 A, 10 A, 100 A)
  • Clamp dimensions: 210 x 62 x 36 mm
  • Incl. ISO calibration certificate

Power Analyzer PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,559.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-830 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


  • PCE-830 + PCE-6801 amp clamp (100 A)
  • Electrical conductor pick-up: 30 mm diameter
  • Range selection: manual (1 A, 10 A, 100 A)
  • Clamp dimensions: 210 x 62 x 36 mm
  • Incl. ISO calibration certificate