Environmental meter with internal memory and software. This environmental meter has been usually used in nuclear power plants. Everyday it is most commonly used in the control and radiation testing of imported goods (steel, wood) from critical areas, as well as to measure the food which has been previously irradiated. This environmental meter can be also used to measure natural radioactive radiation as the one which appears near lakes.

- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alfa 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV

PCE-432 is a class 1 data-logging decibel meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter is equipped with GPS functionality, allowing measured values to be assigned to an exact geographic location.

- Measuring range: 22 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)

PCE-432 is a class 1 data-logging sound pressure level (SPL) meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter is equipped with GPS functionality, allowing measured values to be assigned to an exact geographic location.

- Measuring range: 22 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)

The Dissolved Oxygen Meter is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm...
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm...
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

Environmental tester with internal memory and software. This environmental tester has been usually used in nuclear power plants. Everyday it is most commonly used in the control and radiation testing of imported goods (steel, wood) from critical areas, as well as to measure the food which has been previously irradiated. This environmental tester can be also used to measure natural radioactive radiation as the one which appears near lakes.

- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alfa 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV

The Multifunction Conductivity Meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction conductivity meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

The water analysis meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable water analysis meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

PCE-432 is a class 1 data logging sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter is equipped with GPS functionality, allowing measured values to be assigned to a precise geographic location. The sound level meter calculates the equivalent continuous sound level Leq (LXeq).

- Measuring range: 22 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- GPS receiver for location determination
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)

The heavy duty scale consists of the U-shaped weighing platform and the display unit connected via a 5 m long cable. Due to the U-shape, the heavy duty scale can be easily loaded with an ant or a hand pallet truck.

- Measuring range [Max]: 1500 kg / 3306 lb
- Verification value [e]: 0.5 kg / 1.1 lb
- Usable area U-shape [WxD]: 800 x 1250 mm / 31.5 x 49.2"
- Interface: USB-B (bidirectional)
- Battery and mains operation possible
- Incl. verification (conformity-assessed)

PCE-432 is a class 1 data logging sound level meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter is equipped with GPS functionality, allowing measured values to be assigned to a precise geographic location. The sound level meter calculates the equivalent continuous sound level Leq (LXeq).

- Measuring range: 22 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- GPS receiver for location determination
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)

The legal for trade scale consists of the U-shaped weighing platform and the display unit connected via a 5 m long cable. Due to the U-shape, the legal for trade scale can be easily loaded with an ant or a hand pallet truck.

- Measuring range [Max]: 1500 kg / 3306 lb
- Verification value [e]: 0.5 kg / 1.1 lb
- Usable area U-shape [WxD]: 800 x 1250 mm / 31.5 x 49.2"
- Interface: USB-B (bidirectional)
- Battery and mains operation possible
- Incl. verification (conformity-assessed)

The trade approved scale consists of the U-shaped weighing platform and the display unit connected via a 5 m long cable. Due to the U-shape, the trade approved scale can be easily loaded with an ant or a hand pallet truck.

- Measuring range [Max]: 1500 kg / 3306 lb
- Verification value [e]: 0.5 kg / 1.1 lb
- Usable area U-shape [WxD]: 800 x 1250 mm / 31.5 x 49.2"
- Interface: USB-B (bidirectional)
- Battery and mains operation possible
- Incl. verification (conformity-assessed)

PCE-MMK 1 is a portable handheld digital moisture meter used to measure the moisture content of wood, paper, textiles, concrete and other building materials. This multifunction environmental meter also measures ambient temperature and ambient relative humidity.

Measuring ranges:
- Wood, paper, textiles: 1 ... 75% moisture
- Concrete, building materials: 0.1 ... 2.4% moisture
- Ambient temperature: -40 ... 70°C / -40 ... 158°F
- Ambient relative humidity (RH): 0 ... 100 % RH

The original BIA class 1 closing force measuring device is an electronic closing force measuring device for rail vehicle and bus doors and sliding steps. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments.

- Measuring range: 25 ... 310 N
- Stiffness: 10 N/mm
- Accuracy: +/- 3N or 3% of reading
- Memory for 100 measurements
- Sensor and PC interface
- Applicable standards: EN 14752:2005, VDV 111, VDV 157, 2001/85/EG
- incl. evaluation software PinchPilot
- incl. display unit SEB2
- incl. ISO calibration certificate

As a beam scale, this verified legal for trade scale has the great advantage that it can be easily adapted to different weighing items by changing the beam spacing. This makes the legal for trade scale particularly suitable for weighing long goods.

- Measuring range [Max]: 1500 kg / 3306 lb
- Verification value [e]: 0.5 kg / 1.1 lb
- Usable area beam [WxD]: 120 x 1200 mm / 4.7 x 47.2"
- Interface: USB-B (bidirectional)
- Battery and mains operation possible
- Incl. verification (conformity-assessed)