Anemometer KWS 1 for, for example, PCE-WL windlogger. Simple cross-hair anemometer with pulse output and wind direction sensor. Wind measuring device for the measurement of the wind speed and the wind direction of the horizontal air flow. The shutter speed is scanned free of contact and wear and has a particularly light start-up. The wind flap position is detected by resistance. The digital measuring signals from the wind meter can be evaluated directly.

- Measuring range: 0.9 ... 40 m / s / 5 ... 355 °
- Output signal: 0 ... 100 Hz Pulse / 0 ... 1000 Ohm
- Installation: mast mounting 31 mm drm.
- Heating: No

 

The Automotive Tester / Belt Force Gauge PCE-BTT 1 is made to detect tension of gear belts. The measurement with the Automotive Tester / belt force gauge is really easy.

- Measuring range: 0 ... 750 N
- Display of status: Low, ok, high
- Maximum of thickness: 36 mm
- Overload alarm function: 750 N

 

PCE-DRB 1 is a handheld digital brix refractometer used to determine the sugar content / refractive index of liquid in the 0 ... 90 % Brix / 1.3330 ... 1.5177 nD measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

- Brix, refractive index, temperature
- Measurement range: 0 ... 90 % Brix 
- Resolution: 0.1 % Brix
- Accuracy: ±0.2 % Brix
- Automatic temperature compensation (ATC)

The pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

PCE-430 is a class 1 data-logging noise meter / sound meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time.

- Measuring range: 22 ... 136 db(A)
- A, B, C and Z frequency weightings
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Includes factory calibration certificate according to ISO 9001

The PCE-P41 power converter is used to convert single-phase power parameters into standard signals. This DIN rail-mountable power converter has a freely programmable analog output, RS485 Modbus interface and memory for up to 9,000 measured values.

- Single-phase power
- Current or voltage output
- Direct and indirect measurement
- Configurable via USB
- RS485 Modbus interface
- Memory for up to 9,000 measured values

Air flow meter KWS1 for, for example, PCE-WL windlogger. Simple cross-hair anemometer with pulse output and wind direction sensor. Wind measuring device for the measurement of the wind speed and the wind direction of the horizontal air flow. The shutter speed is scanned free of contact and wear and has a particularly light start-up. The wind flap position is detected by resistance. The digital measuring signals from the wind meter can be evaluated directly.

- Measuring range: 0.9 ... 40 m / s / 5 ... 355 °
- Output signal: 0 ... 100 Hz Pulse / 0 ... 1000 Ohm
- Installation: mast mounting 31 mm drm.
- Heating: No

Wind speed meter KWS1 for, for example, PCE-WL windlogger. Simple cross-hair anemometer with pulse output and wind direction sensor. Wind measuring device for the measurement of the wind speed and the wind direction of the horizontal air flow. The shutter speed is scanned free of contact and wear and has a particularly light start-up. The wind flap position is detected by resistance. The digital measuring signals from the wind meter can be evaluated directly.

- Measuring range: 0.9 ... 40 m / s / 5 ... 355 °
- Output signal: 0 ... 100 Hz Pulse / 0 ... 1000 Ohm
- Installation: mast mounting 31 mm drm.
- Heating: No

 

PCE-DRH 1 is a handheld digital refractometer used to determine the sugar content / water content / degrees Baumé (Bé°) / refractive index of honey in the 0 ... 90 % Brix / 5 ... 38% water / 33 ... 48 Bé° / 1.3330 ... 1.5177 nD measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Brix, water content, degrees Baumé (Bé°), refractive index, temperature
- Measurement range: 0 ... 90 % Brix 
- Resolution: 0.1 % Brix
- Accuracy: ±0.2 % Brix
- Automatic temperature compensation (ATC) 

PCE-DRP 1 is a handheld digital refractometer used to determine the sugar content / coffee p1 / refractive index of coffee and similar liquids in the 0 ... 50 % Brix / 0 ... 25 coffee p1 / 1.3330 ... 1.4200 nD measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Brix, coffee p1, refractive index, temperature
- Measurement range: 0 ... 50 % Brix 
- Resolution: 0.1 % Brix
- Accuracy: ±0.2 % Brix 
- Automatic temperature compensation (ATC)

PCE-DRW 1 is a handheld digital refractometer used to determine the sugar content / specific gravity of beer and similar liquids in the 0 ... 50 % Brix / 1.000 ... 1.130 d 20⁄20 measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Brix, specific gravity (d 20⁄20), temperature
- Measurement range: 0 ... 50 % 
- Resolution: 0.1 % Brix 
- Accuracy: ±0.2 % Brix
- Automatic temperature compensation (ATC)

PCE-DRS 1 is a handheld digital sodium chloride (NaCl) refractometer used to determine the salinity or salt content (%, ‰), specific gravity (SG) and refractive index (nD) of liquid. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

- Measurement parameters:
- Salt content, refractive index, specific gravity, temperature
- Measurement range: 0 ... 280 ‰ salinity
- Resolution: 01 ‰ 
- Accuracy: ±2 ‰
- Automatic temperature compensation (ATC)

The Gasflag 1-Channel Gas Detector is a stationary, permanently fixed or wall-mounted occupational health and safety (OHS) gas monitoring device equipped with a 4 to 20 mA input for the connection of one gas sensor (sensor not included). The Gasflag responds to a gas flare in less than a second, issuing a dual audible and visual alarm to alert nearby personnel.

- Input: 4... 20-mA, single channel
- Operating voltage: 13... 28V DC
- Audible sound and visual LED alarm indicators
- Gas sensor sold separately - see accessories for details
- Outputs: Single-pole change-over for use with DC signals, relay contacts 1 A at 30V DC

PCE-VOC 1 is a portable handheld volatile organic compound (VOC) and formaldehyde (HCHO) meter or gas leak detector for indoor air quality (IAQ) monitoring applications. This easy-to-use VOC meter is ideal for measuring total volatile organic compound (TVOC) and formaldehyde (HCHO) levels in homes, offices, factories, laboratories, hotels, schools and other indoor environments.

- Range Formaldehyde: 0.00... 5.00 ppm
- TVOC range: 0.00... 9.99 ppm
- Displays units in ppm or mg/m³
- Audible and visual alarms
- Long-lasting rechargeable battery

PCE-SPM 1 is a photovoltaic (PV) light meter used to measure solar radiation, solar energy or solar power. The meter's easy-to-read 4-digit LCD screen clearly displays P_tot in W/m² or BTU/(ft² x h), while the device's auto data memory stores up to 43,000 data sets.

- Measuring range: 0 ... 2000 W/m² or 0 ... 634 BTU/(ft² x h)
- Resolution: 0.1 W/m² or 0.1 BTU/(ft² x h)
- Accuracy: ±10 W/m² or ±3 BTU/(ft² x h) or ±5%; whichever is greatest in sunlight