The 4-channel PCE-VM 5000 Vibration Recorder performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.

- 4 channels / inputs
- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously, 2 included
- Data storage on SD card
- Sampling rate: min. 1 sec.

The pressure gauge is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The pressure gauge is particularly suitable for the complete documentation of your measuring tasks.

- Measurement of differential pressure and relative pressure
- 11 selectable units: mbar, bar, psi, kPa, ...
- Measuring range from -140 to +140 mbar
- Min / max and average value display directly on the display
- USB interface
- Incl. ISO calibration certificate

The PCE-P20H transducer measures voltage up to 400 V DC and converts them into a standard signal. Depending on the version, the PCE-P20H transducer can measure voltages up to 100 V DC, 250 V DC or 400 V DC and outputs a 4 ... 20 mA or 0 ... 10 V standard signal. Depending on the model, the supply voltage of the transducers is either 85 ... 253 V AC / DC or 20 ... 40 V AC / DC.

 

The differential pressure meter / pressure gauge is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure meter is particularly suitable for the complete documentation of your measuring tasks.

- Measurement of differential pressure and relative pressure
- 11 selectable units: mbar, bar, psi, kPa, ...
- Measuring range from -140 to +140 mbar
- Min / max and average value display directly on the display
- USB interface

The relative humidity meter was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the relative humidity meter are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.

- Humidity measuring range: 0 ... 100% RH
- Temperature measuring range: -20 ... 60 °C
- Output: 4 ... 20 mA
- Special Feature: Manual switchable analog value output

The thermo hygrometer was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the thermo hygrometer are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.

- Humidity measuring range: 0 ... 100% RH
- Temperature measuring range: -20 ... 60 °C
- Output: 4 ... 20 mA
- Special Feature: Manual switchable analog value output

 

   ozin², ftH2O, cmH2O, kgcm², bar

The pressure gauge PCE-P05-ICA is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure gauge is particularly suitable for the complete documentation of your measuring tasks.

- Measuring range from -344 ... +344 mbar
- Parameters:
   inH2O, psi, mbar, kPa, inHg, mmHg,
   ozin², ftH2O, cmH2O, kgcm², bar
- Backlight can be switched on/off
- Software with USB cable included
- Incl. ISO calibration certificate

The pressure meter PCE-P05-ICA is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure meter is particularly suitable for the complete documentation of your measuring tasks.

- Measuring range from -344 ... +344 mbar
- Parameters:
   inH2O, psi, mbar, kPa, inHg, mmHg,
   ozin², ftH2O, cmH2O, kgcm², bar
- Backlight can be switched on/off
- Software with USB cable included
- Incl. ISO calibration certificate

The manometer is suitable for flush sanitary installation. The manometer may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the manometer has a food safe FDA approval. The flush mounting of the manometer can be sterilized.

- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Clamping table for HTGS for samples with Ø from 7 to 50 mm (max. 5 Nm nominal load).

Including clamping pins (ST-P) with urethane surface, length 10 mm. Recommended for locks, containers for eye drops, etc.

The differential pressure manometer PCE-P15-ICA with highest accuracy and best performance. With this differential pressure manometer you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The differential pressure manometer is ideal for use in industry, in service and in the laboratory.

- Range: ± 1000mbar / ± 15 psi
- Resolution: 1mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate

The Differential Pressure Manometer PCE-P30-ICA with highest accuracy and best performance. With this manometer you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The manometer is ideal for use in industry, in service and in the laboratory.

- Range: ± 2000mbar / ± 30 psi
- Resolution: 2mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate

The differential pressure meter PCE-P15-ICA with highest accuracy and best performance. With this differential pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The differential pressure meter is ideal for use in industry, in service and in the laboratory.

- Range: ± 1000mbar / ± 15 psi
- Resolution: 1mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate

The differential pressure meter PCE-P30-ICA with highest accuracy and best performance. With this differential pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The differential pressure meter is ideal for use in industry, in service and in the laboratory.

- Range: ± 2000mbar / ± 30 psi
- Resolution: 2mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate

The PCE-P20Z transmitter is used to convert a measured current into a standard signal. This makes it possible to determine the most diverse currents with the transmitter.

- Input: Alternating current
- Various supply voltages
- For direct or indirect current measurement
- Current transformer can be connected
- With voltage output or current output

Note: This item must be configured before ordering!