Products for 'Electrodo de pH HI 10530 '

Environmental Tester PCE-PH 28L-ICA incl. ISO Calibration Certificate

£ 271.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester is equipped with a flat electrode membrane which is installed in a shaft. So with the environmental tester you can measure samples of viscous media in test tubes. This feature makes it possible to use very small volumes of liquids in beakers or test tubes. As a result, the environmental tester can be used not only in the field but also in the laboratory.

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F
- Flat pH electrode with long shaft
- Automatic temperature compensation
- For small sample quantities
- incl. ISO Calibration Certificate

Conductivity Meter PCE-PH 30

£ 173.00

Price excl. VAT &. delivery
2 year Warranty

The conductivity meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable conductivity meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection

Environmental Meter PCE-PH 30

£ 173.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection

Salt Meter PCE-PH 30

£ 173.00

Price excl. VAT &. delivery
2 year Warranty

The salt meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable salt meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection

Environmental Tester PCE-PH 30

£ 173.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental tester PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection

Environmental Meter PCE-PH 26F-ICA incl. ISO Calibration Certificate

£ 246.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter is used to measure the pH of viscous media. Thanks to the flat pH electrode, the environmental meter is particularly well suited for the measurement of the pH value of sludges or viscous media such as oils and creams. The measuring range of the environmental meter ranges from -1 ... 15 pH, and it has an internal calibration function with up to 3 interpolation points.

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F
- Flat pH electrode
- Automatic temperature compensation
- For viscous liquids
- incl. ISO Calibration Certificate

Water Analysis Meter PCE-PH 28L

£ 221.00

Price excl. VAT &. delivery
2 year Warranty

The water analysis meter is equipped with a flat electrode membrane which is installed in a shaft. So with the water analysis meter you can measure samples of viscous media in test tubes. This feature makes it possible to use very small volumes of liquids in beakers or test tubes. As a result, the water analysis meter can be used not only in the field but also in the laboratory.

Environmental Tester PCE-PH 26F-ICA incl. ISO Calibration Certificate

£ 246.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester is used to measure the pH of viscous media. Thanks to the flat pH electrode, the environmental tester is particularly well suited for the measurement of the pH value of sludges or viscous media such as oils and creams. The measuring range of the environmental tester ranges from -1 ... 15 pH, and it has an internal calibration function with up to 3 interpolation points.

pH Meter PCE-PH20S-ICA incl. ISO calibration certificate

£ 183.00

Price excl. VAT &. delivery
2 year Warranty

The soil pH meter is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The soil pH meter can be recalibrated by using the calibration solutions that are supplied with the device.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- pH electrode for piercing into Soil
- Incl. ISO calibration certificate

**Care must be taken when inserting probe to not break it**

Water Analysis Meter PCE-PH 26F

£ 195.00

Price excl. VAT &. delivery
2 year Warranty

The water analysis meter is used to measure the pH of viscous media. Thanks to the flat pH electrode, the water analysis meter is particularly well suited for the measurement of the pH value of sludges or viscous media such as oils and creams. The measuring range of the water analysis meter ranges from -1 ... 15 pH, and it has an internal calibration function with up to 3 interpolation points.

Water Analysis Meter PCE-PH 28L-ICA incl. ISO Calibration Certificate

£ 271.00

Price excl. VAT &. delivery
2 year Warranty

pH Meter PCE-PH20-ICA incl. ISO calibration certificate

£ 173.00

Price excl. VAT &. delivery
2 year Warranty

The pH meter was developed to directly determine the pH in aqueous media or water based solutions. Depending on the purpose of creating an aquarium, whether commercial, scientific (experimental and laboratory tests) or decorative, the most desirable pH level should be maintained to provide correct living conditions for the fish and other organisms.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media
- Incl. ISO calibration certificate

Water Analysis Meter PCE-PH 30

£ 173.00

Price excl. VAT &. delivery
2 year Warranty

The water analysis meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable water analysis meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection

pH Meter for Soil PCE-PH20S

£ 133.00

Price excl. VAT &. delivery
2 year Warranty

The pH meter for soil has been developed with the purpose of finding an effective method for directly determining the pH value of soil. With the help of this pH meter, it is possible to quickly and accurately measure the pH value of soil, including a soil sample taken from the ground.

- Use: Soil pH measurement
- Measuring range: 0.00 ... 14.00 pH
- Dissolution: 0.01 pH
- Power supply: 4 x 1.5 V AAA batteries

**Care must be taken when inserting probe to not break it**

Water Analysis Meter PCE-PH 26F-ICA incl. ISO Calibration Certificate

£ 246.00

Price excl. VAT &. delivery
2 year Warranty

Aquarium pH Meter PCE-PH20

£ 120.00

Price excl. VAT &. delivery
2 year Warranty

The pH meter PCE-PH20 is a user-friendly hand-held pH device that allows fast and reliable pH measurement. This pH meter is very suitable for use in the area of aquaristics or aquarium care. The pH meter PCE-PH20 has a three-point calibration, which is carried out automatically.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media or water based

Environmental Meter PCE-PH 22-ICA incl. ISO calibration certificate

£ 145.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter is used for fast and accurate detection of pH and temperature. Due to the practical double display, both values can be read simultaneously on the environmental meter.

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
- Incl. ISO calibration certificate

Environmental Tester PCE-PH 22-ICA incl. ISO calibration certificate

£ 145.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester is used for fast and accurate detection of pH and temperature. Due to the practical double display, both values can be read simultaneously on the environmental tester.