Products for 'Dynamomètre de 50 Kg '

Particle Counter Dust Measuring Device PCE-CPC 50

£ 1,682.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art particle counter dust measuring device enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the particle counter dust measuring device is performed by an internal pump.

- Particle concentration: 0.3 ... 10 μm

- Particle measurement channel sizes:

0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

- Output in particles/m³,

particles/l or particles/28.3L

- Modbus RTU and MQTT via RS485

- Analogue output 4 . .. 20 mA

Insulation Tester PCE-ITE 50

£ 939.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-ITE 50 is a robust insulation tester with a large 3.5" TFT color LCD display. The insulation tester PCE-ITE 50 also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

- 3.5" color TFT LCD display
- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- SD card and Bluetooth
- Dual display
- Good / bad FI test
- Low Ohm measurement
- Up to 1000V terminal voltage

Force Gage PCE-VTS 50-PFG 500-KIT incl. Test Stand

£ 1,807.00

Price excl. VAT &. delivery
2 year Warranty

The force gage incl. test stand is a handy, digital measuring device for measuring tensile and compressive forces. The force gage offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements. This kit contains a vertical materials test stand which is a motorized test station with a force range of up to 500 N.

- Measuring range: 0 ... 500 N
- Resolution: 0.1 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Motorised Force Test Stand PCE-VTS 50
- Force range: 500 N / 50 kg / 110 lb
- Distance display resolution: 0.02 mm
- Resolution: 1 mm/min
- Tensile and compression testing
- Travel: 270 mm / 10.6"

PCE-VTS 50-PFG 500-KIT incl. Force Test Stand and Force Gauge

£ 1,807.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge incl. test stand is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements. This kit contains a vertical materials test stand which is a motorized test station with a force range of up to 500 N.

Earth Tester PCE-ITE 50

£ 939.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-ITE 50 is a robust earth tester with a large 3.5" TFT color LCD display. The earth tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

PCE-VTS 50-PFG 500-KIT incl. Force Test Stand and Force Gauge

£ 1,807.00

Price excl. VAT &. delivery
2 year Warranty

IoT Sensor PCE-ITE 50

£ 939.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-ITE 50 is a robust IoT sensor with a large 3.5" TFT color LCD display. The IoT sensor also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

Water Analysis Meter PCE-TUM 50

£ 1,008.00

Price excl. VAT &. delivery
2 year Warranty

The water analysis meter PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the water analysis meter and to check the quality of drinking water and waste water.

- Measurement method: ISO 7027 (90°)
- Measuring ranges: 0 ... 2000 NTU
0 ... 500 EBC
0 ... 9999 ASBC
- 3 measuring units
Turbidity calibration up to 7 points

Electrical Tester PCE-ITE 50

£ 939.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-ITE 50 is a robust Electrical Tester with a large 3.5" TFT color LCD display. The Electrical Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

Voltmeter PCE-GPA 50

£ 671.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-GPA 50 voltmeter is used to measure the current of 1- or 3-phase loads. This voltmeterPCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the voltmeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple

Power Meter PCE-GPA 50

£ 671.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-GPA 50 power meter is used to measure the current of 1- or 3-phase loads. This power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple

Clamp Meter PCE-GPA 50

£ 671.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.

Clamp on Tester PCE-GPA 50

£ 671.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-GPA 50 clamp on tester is used to measure the current of 1- or 3-phase loads. This clamp on tester PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp on tester.

Digital Multimeter PCE-GPA 50

£ 671.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Power Analyzer PCE-GPA 50

£ 671.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-GPA 50 power analyzer is used to measure the current of 1- or 3-phase loads. This power analyzer PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power analyzer.

Electrical Tester PCE-GPA 50

£ 671.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-GPA 50 electrical tester is used to measure the current of 1- or 3-phase loads. This electrical tester PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the electrical tester.

PAT Tester / Portable Appliance Testing Equipment PCE-ITE 50

£ 939.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-ITE 50 is a robust PAT Tester with a large 3.5" TFT color LCD display. The PAT Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

Current Clamp PCE-GPA 50

£ 671.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-GPA 50 current clamp is used to measure the current of 1- or 3-phase loads. This current clamp PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the current clamp.