With the table-top water analysis meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the water analysis meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

- pH measuring range: -2.000 ... +19.999 pH
- Resolution: 0.1 / 0.01 pH
- Measuring range mV: -1999.9 ... +1999.9 mV
- Resolution: 1 mV
- Temperature measuring range: -10 ... +110 °C / 14 ... 230 °F
- Resolution: 0.1 °C
- USB and Bluetooth interface
- Memory for 300 measured values
- Live viewing software
- 3 point calibration

The level indicator is the ideal measuring device to determine the filling level of a silo. Thanks to the 4 ... 20 mA output signal, the level indicator can also be connected to the operational process control.

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread
- incl. external digital display PCE-N24S:
- Voltage supply: selectable
- Input signal: selectable
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"

The panel meter is the ideal measuring device to determine the filling level of a silo. Thanks to the 4 ... 20 mA output signal, the panel meter can also be connected to the operational process control.

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread
- incl. external digital display PCE-N24S:
- Voltage supply: selectable
- Input signal: selectable
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"

The ultrasonic level indicator is the ideal measuring device to determine the filling level of a silo. Thanks to the 4 ... 20 mA output signal, the ultrasonic level indicator can also be connected to the operational process control.

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread
- incl. external digital display PCE-N24S:
- Voltage supply: selectable
- Input signal: selectable
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"

- Measuring range: 0 ... 10 N
- Resolution: 0,002 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

The PCE-DDD 10 shore Material Tester is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.

- Handheld device
- For Shore D measurements
- Single and Serial measurements
- Data transfer to PC
- Incl. ISO Calibration Certificate

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread

- Measuring range: 0 ... 10 m / 0 ... 32.8 ft
- Accuracy: 0.5%
- Resolution: 0.001 m
- With display for setting and reading
- Stable M60 connection thread

The PCE-DDA 10 shore Material Tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 Material Tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.

- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

The PCE-DDD 10 Shore D durometer is a portable handheld device used to check Shore D hardness in hard rubber and thermoplastic. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).

- Portable handheld digital device
- For Shore D hardness testing
- Single and serial measurements
- Data transfer to PC

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 hardness tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.

- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

PCE-MPC 10 is a portable handheld air sampler or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).

- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets

The PCE-HT 71N hygrometer data logger detects air temperature and humidity and stores readings to its internal memory. This hygrometer is compact and has enough memory to store up to 32,000 readings, 16,000 for each parameter, and is used above all as a Data- Logger, in supermarket refrigeration units, refrigerated transport, warehouses and other temperature controlled environments.

- Measurement range: 0 ... 100% RH / -35 ... 80°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))