The 100N Force Gauge is suited for weighing all goods of up to 10 kg or 22 lbs. The Force Gauge has a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Force Gauge does not need any batteries and is also suited for demonstration purposes in schools or universities.

- Measuring range: 0 ... 10 kg
- Resolution: 100 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories

The 100N Hanging Scales are suited for weighing all goods of up to 10 kg or 22 lbs. The hanging scales have a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to their type of construction, the hanging scales do not need any batteries and are also suited for demonstration purposes in schools or universities.

- Measuring range: 0 ... 10 kg
- Resolution: 100 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories

The 100N LAB Scale is suitable for weighing all goods of up to 10 kg or 22 lbs. The LAB Scale has a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the LAB Scale does not need any batteries and is also suited for demonstration purposes in schools or universities.

- Measuring range: 0 ... 10 kg
- Resolution: 100 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories

The 100N Laboratory Balance is suited for weighing all goods of up to 10 kg or 22 lbs. The Laboratory Balance has a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Laboratory Balance does not need any batteries and is also suited for demonstration purposes in schools or universities.

- Measuring range: 0 ... 10 kg
- Resolution: 100 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories

Multifunction PCE-THB 38 air humidity meter to measure a range of parameters: humidity, temperature, barometric pressure (dewpoint temperature is calculated). The air humidity meter also shows atmospheric pressure in a range of 10 to 1100hPa. With all of these features, it is a complete climatological device. The test instrument is shipped manufacturer calibrated. Otherwise, a laboratory calibration and certification can be ordered optionally to meet ISO or requirements.

Clamp Meter to test leakage / RMS measurement / continuity and resistance test. With PCE-LCT 1 leakage current clamp meter it is possible to measure leakage current with a range up to 100 A. The  current meter can measure leakage current while current flows through electrical conductors that are not designed for conduction current. The leakage clamp meter is delivered manufacturer calibrated and can additionally be certified to ISO or standards.

- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 Ohms
- Test cables are included

Clamp on Tester PCE-LCT 1 to test leakage / RMS measurement / continuity and resistance test. The Clamp on Tester can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current. The Clamp on Tester, as all test instruments, is delivered manufacturer calibrated, but can additionally be certified to ISO.

- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 O
- Test cables are included

The Climate Meter PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the wind speed, the Climate Meter measures the temperature, humidity, dew point, the wet bulb temperature and the air volume. Average values can be determined with the Climate Meter from the 20 preset points.

- Temperature measuring range: -15 ... 50°C / 5 ... 122°F
- Humidity range: 5 ... 95% RH
- Air speed: 0.4 ... 35 m / s
- Air flow: 0 ... 9.999 m³ / s

The PCE-THB 38 Climate Meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Climate Meter is sent out manufacturer calibrated. An ISO certification is available optionally.

The condition monitoring tachometer can be used contactless or with mechanical contact. The PCE-T237 condition monitoring tachometer is particularly suitable for recording rotational speeds and speeds on rotating machines and systems (on conveyor belts, motors, belt drives, etc.).

- Contact measurement of rpm via cone adapter
- Contact measurement of m / min via surface wheel
- Robust ABS plastic housing
- Meter count: 0.1 ... 199,999 m

The condition monitoring tachometer can be used contactless or with mechanical contact. The PCE-T237 condition monitoring tachometer is particularly suitable for recording rotational speeds and speeds on rotating machines and systems (on conveyor belts, motors, belt drives, etc.).

- Contact measurement of rpm via cone adapter
- Contact measurement of m / min via surface wheel
- Robust ABS plastic housing
- Meter count: 0.1 ... 199,999 m
- Incl. ISO calibration certificate

The PCE-VD 3 Vibration Meter is a miniaturized universal Vibration Meter with an included built-in three-axes acceleration sensor (X, Y, Z axis). The internal sensor of the PCE-VD 3 Vibration Meter measures acceleration force along the X, Y, and Z axes with a measurement range of ±18 g per axis. Especially made for use in machine condition monitoring.

- 3-axis vibration data logging
- Software included -USB port
- Light weight
- Stand included
- Storage capacity: 4 Mbit (85764 records)
- Magnetic wall mount

With the PCE-LCT 1 Current Clamp it is possible to measure leakage currents up to a range of 100 A. PCE-LCT 1 Current Clamp can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current.

- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 O
- Test cables are included

The PCE-THB 38 Dew Point Thermometer is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Dew Point Thermometer is sent out manufacturer calibrated. An ISO certification is available optionally.

Digital Multimeter to test leakage / RMS measurement / continuity and resistance test.

- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 O
- Test cables are included