Industrial Measurement Products and Solutions
Order no.: PCE-KLM 1
PCE-KLM 1 is a screw-on luminance adaptor for the PCE-L 100 lux or light meter.

- Lens: 100 mm, f / 2.5
- Dimensions: 126 x 169 x 44 mm
- Weight: Approx. 550 g
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 30
The conductivity meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable conductivity meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 30
The environmental meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 30
The environmental tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental tester PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HM 2000

The heating mantle PCE-HM 2000 is used in applications where samples or liquids must be quickly heated in the laboratory. The flask may have a volume of up to 2 liters and it is placed in the crocheted net of the heating mantle. Here it is heated by the heating elements with a power of 450 W, and the temperature can be continuously adjusted up to 450 °C using the rotary switch on the heating mantle.


- Power 450 W
- Operating temperature 0 ... +450 °C
- Fast heat-up time
- For round flasks up to 2000 ml

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 30
The pH meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable pH meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 30
The redox meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable redox meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 30
The salt meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable salt meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RE62

The PCE-RE62 is a universal controller for various sensor signals and control modes. The universal controller can process RTD temperature sensors, thermocouple and DC standard signals on the input side. On the output side, a relay is always available on the PCE-RE62 universal controller. Optionally additional relays, a 0/5 V output to the SSR control or an analogue output can be selected. Furthermore, a sensor supply of 24 V / 40 mA can be installed in the controller on the output side.


- Self-optimizing PID control
- Universal input
- DIN rail mounting
- Relay, 0/5 V or analog output selectable

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 30
The water analysis meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable water analysis meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS V
The Air Flow Meter impresses with its compact design and various output signals. The air flow meter can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output: 0 ... 10 V
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS V
The Air Velocity Meter impresses with its compact design and various output signals. The Air Velocity Meter can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output: 0 ... 10 V
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS V
The Anemometer impresses with its compact design and various output signals. The Anemometer can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output: 0 ... 10 V
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SC 42

PCE-SC 42 is a class 2 acoustic or sound calibrator used to calibrate sound level meters, microphones and noise measuring devices and equipment. Suitable for use with type 2 or class II SPL meters, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory.


- Frequency: 1 kHz / ± 0.1 %
- Sound pressure levels: 94 dB and 114 dB
- Accuracy: ± 0.3 dB (at 20 °C / 68 °F and 760 mm Hg / 101325 Pa)
- Hole opening is 12 mm for sound meter microphone

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SC 42

PCE-SC 42 is a class 2 acoustic or sound calibrator used to calibrate sound level meters, microphones and noise measuring devices and equipment. Suitable for use with type 2 or class II SPL meters, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory.


- Frequency: 1 kHz / ± 0.1 %
- Sound pressure levels: 94 dB and 114 dB
- Accuracy: ± 0.3 dB (at 20 °C / 68 °F and 760 mm Hg / 101325 Pa)
- Hole opening is 12 mm for sound meter microphone

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SC 42

PCE-SC 42 is a class 2 acoustic or sound calibrator used to calibrate decibel meters, microphones and noise measuring devices and equipment. Suitable for use with type 2 or class II SPL meters, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory.


- Frequency: 1 kHz / ± 0.1%
- Sound pressure levels: 94 dB and 114 dB
- Accuracy: ± 0.3 dB (at 20 °C / 68 °F and 760 mm Hg / 101325 Pa)
- Hole opening is 12 mm for sound meter microphone

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SC 42

PCE-SC 42 is a class 2 acoustic or sound calibrator used to calibrate sound level meters, microphones and noise measuring devices and equipment. Suitable for use with type 2 or class II SPL meters, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory.


- Frequency: 1 kHz / ± 0.1%
- Sound pressure levels: 94 dB and 114 dB
- Accuracy: ± 0.3 dB (at 20 °C / 68 °F and 760 mm Hg / 101325 Pa)
- Hole opening is 12 mm for sound meter microphone

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-779N

The Condition Monitoring Thermometer PCE-779N measures temperatures quickly and without contact. The PCE-779N can be used for almost all surfaces. The emissivity of the infrared thermometer is adjustable over the range of 0.1 ... 1.0. The infrared thermometer has various measurement functions such as max, min and average measurement.


- OLED-Display
- Measuring range: -60 ... 760°C / -76 ... 1400°F
- Additional thermocouple measurement -64 ... 1400°C / -83.2 ... 2552°F
- Dual Laser
- Resolution: 0.1°C / 0.18°F at -83.2 ... 999.9°C (-117.8 ... 1831.8°F), otherwise 1°C / 1.8°F 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-779N

The PCE-779N measures temperatures quickly and without contact. The PCE-779N can be used for almost all surfaces. The emissivity of the digital thermometer is adjustable over the range of 0.1 ... 1.0. The digital thermometer has various measurement functions such as max, min and average measurement.


- OLED-Display
- Measuring range: -60 ... 760°C / -76 ... 1400°F
- Additional thermocouple measurement -64 ... 1400°C / -83.2 ... 2552°F
- Dual Laser
- Resolution: 0.1°C / 0.18°F at -83.2 ... 999.9°C (-117.8 ... 1831.8°F), otherwise 1°C / 1.8°F 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS V
The Environmental Meter impresses with its compact design and various output signals. The Environmental Meter can be used for applications in warning technology, building automation and home technology.

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output: 0 ... 10 V
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer