Order no.: PCE-IVE 300

PCE-IVE 300 is an industrial endoscope or borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the endoscope camera captures both picture and video and saves the files to an SD card memory (included).

 

- Telescopic pole extends up to 1 m (3.28')
- Gooseneck camera head diameter of 28 mm (1.11")
- Waterproof and dustproof IP68 ingress protection rating

Manufacturer: PCE Instruments
£ 1,146.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IVE 300

PCE-IVE 300 is an industrial borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28 ft) in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the borescope camera captures both picture and video and saves the files to an SD card memory (included).

 

- Telescopic pole extends up to 1 m / 3.3 ft
- Gooseneck camera head diameter of 28 mm / 1.11 in
- Waterproof and dustproof IP68 ingress protection rating

Manufacturer: PCE Instruments
£ 1,146.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IVE 300

PCE-IVE 300 is a borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the borescope camera captures both picture and video and saves the files to an SD card memory (included).

- Telescopic pole extends up to 1 m / 3.3 ft
- Gooseneck camera head diameter of 28 mm / 1.11 in
- Waterproof and dustproof IP68 ingress protection rating

Manufacturer: PCE Instruments
£ 1,146.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IVE 300

PCE-IVE 300 is a videoscope or video borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the borescope camera captures both picture and video and saves the files to an SD card memory (included).

 

- Telescopic pole extends up to 1 m / 3.3 ft
- Gooseneck camera head diameter of 28 mm / 1.11 in
- Waterproof and dustproof IP68 ingress protection rating

Manufacturer: PCE Instruments
£ 1,146.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IGM 60-ICA

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SGM 60-ICA

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SGM 60-ICA
The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IGM 60-ICA

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SGM 60-ICA

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IGM 60-ICA

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 1000 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SGM 60-ICA

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DFG N 5K-ICA
The force gage PCE DFG N 5K-ICA measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 1,130.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DFG N 5K-ICA
The force gauge PCE DFG N 5K-ICA measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 1,130.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: RT STROBE 3000 LED

Stationary Strobe Rotation Meter with intelligent LED-technology. 6000 LUX at 30 cm.


- Wear-resistant LED flash production
- 0 to 120,000 FPM
- 6000 LUX at 30 cm
- Illumination area of 20 by 30 cm
- Widths > 300 mm
- Strobes can be connected in parallel

 

Manufacturer: PCE Instruments
£ 1,127.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: RT STROBE 3000 LED

Stationary strobe tachometer with intelligent LED-technology.


- Wear-resistant LED flash production
- 0 to 120,000 FPM
- 6000 LUX at 30 cm
- Illumination area of 20 by 30 cm
- Widths > 300 mm
- Strobes can be connected in parallel

 

Manufacturer: PCE Instruments
£ 1,127.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: RT STROBE 3000 LED

Stationary stroboscope with intelligent LED-technology.


- Wear-resistant LED flash production
- 0 to 120,000 FPM
- 6000 LUX at 30 cm
- Illumination area of 20 by 30 cm
- Widths > 300 mm
- Strobes can be connected in parallel

 

Manufacturer: PCE Instruments
£ 1,127.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IVE 330

The PCE-IVE 330 Industrial Endoscope is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m telescopic rod of the industrial endoscope, it is also possible to view areas that are difficult to access. Visual monitoring with the industrial endoscope is supported by the flexible camera head.


- flexible camera head
- 8" LCD monitor
- up to three meters long
- diameter of the camera: 23 mm / 0.9 in
- memory function

Manufacturer: PCE Instruments
£ 1,125.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IVE 330

The PCE-IVE 330 industrial borescope is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft telescopic rod of the borescope, it is also possible to view areas that are difficult to access. Visual monitoring with the borescope is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
£ 1,125.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IVE 330

The PCE-IVE 330 inspection camera is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft  telescopic rod of the inspection camera, it is also possible to view areas that are difficult to access. Visual monitoring with the inspection camera is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
£ 1,125.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-IVE 330

The PCE-IVE 330 videoscope or inspection camera is used to diagnose and monitor hard-to-reach areas on vehicles, containers, machinery and equipment. Thanks to the 3 m / 9.8 ft telescopic rod of the videoscope, it is also possible to view areas that are difficult to access. Visual monitoring with the videoscope is supported by the flexible camera head.


- Flexible camera head
- 8" LCD monitor
- Up to three meters long
- Diameter of the camera: 23 mm / 0.9 in
- Memory function

Manufacturer: PCE Instruments
£ 1,125.00

Price excl. VAT &. delivery
2 year Warranty