Query results | PCE Instruments

£ 1,144.00

Price excl. VAT &. delivery
2 year Warranty

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

HVAC Meter / HVACR Tester PCE-UFM 32CU

£ 1,144.00

Price excl. VAT &. delivery
2 year Warranty

Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

Ultrasonic Flow Meter PCE-UFM 32CU

£ 1,144.00

Price excl. VAT &. delivery
2 year Warranty

Our Ultrasonic Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The Ultrasonic Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

Ultrasonic Tester / Ultrasonic Testing PCE-UFM 32CU

£ 1,144.00

Price excl. VAT &. delivery
2 year Warranty

Our Ultrasonic Tester / Ultrasonic Testing enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The Ultrasonic Tester / Ultrasonic Testing of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

Environmental Meter PCE-PVA 100

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the environmental meter covers a large number of solar modules.

Measuring range: 0 … 12 A DC
Three different test functions
PC interface for data transfer
Switchable graphic view
Application, e.g. photovoltaic systems

Environmental Tester PCE-PVA 100

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the environmental tester covers a large number of solar modules.

Measuring range: 0 … 12 A DC
Three different test functions
PC interface for data transfer
Switchable graphic view
Application, e.g. photovoltaic systems

Gloss Meter PCE-IGM 60

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.

Measurement geometry: 60° degree angle
Measuring range: 0 … 300 GU
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Light source: D65
Wave length: 400-700 nm

Gloss Meter PCE-SGM 60

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).

Measurement geometry: 60° degree angle
Measurement up to 1000 gloss units
Internal reading memory up to 5000 readings
3.5" TFT display
Light source: D65
Wave length: 400-700 nm

Gloss Test Instrument PCE-SGM 60

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).

Measurement geometry: 60° degree angle
Measurement up to 1000 gloss units
Internal reading memory up to 5000 readings
3.5" TFT display
Light source: D65
Wave length: 400-700 nm

NDT Tester - Gloss Meter PCE-IGM 60

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The NDT tester or gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.

Measurement geometry: 60° degree angle
Measuring range: 0 … 300 GU
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Light source: D65
Wave length: 400-700 nm

Paint Gloss Tester PCE-IGM 60

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

Measurement geometry: 60° degree angle
Measuring range: 0 … 300 GU
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Light source: D65
Wave length: 400-700 nm

Paint Gloss Tester PCE-SGM 60

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

Measurement geometry: 60° degree angle
Measurement up to 1000 gloss units
Internal reading memory up to 5000 readings
3.5" TFT display
Light source: D65
Wave length: 400-700 nm

Photovoltaic Meter PCE-PVA 100

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The photovoltaic meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the photovoltaic meter covers a large number of solar modules.

Measuring range: 0 … 12 A DC
Three different test functions
PC interface for data transfer
Switchable graphic view
Application, e.g. photovoltaic systems

Radiation Detector PCE-PVA 100

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The radiation detector is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the radiation detector covers a large number of solar modules.

Measuring range: 0 … 12 A DC
Three different test functions
PC interface for data transfer
Switchable graphic view
Application, e.g. photovoltaic systems

Radioactivity Meter PCE-PVA 100

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The radioactivity meter is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the radioactivity meter covers a large number of solar modules.

Measuring range: 0 … 12 A DC
Three different test functions
PC interface for data transfer
Switchable graphic view
Application, e.g. photovoltaic systems

Solar Measuring Device PCE-PVA 100

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The solar measuring device is a useful tool to examine solar cells for their characteristics. With a DC voltage range of 0… 60 V and a DC current range of 0… 12 A, the solar measuring device covers a large number of solar modules.

Measuring range: 0 … 12 A DC
Three different test functions
PC interface for data transfer
Switchable graphic view
Application, e.g. photovoltaic systems

Surface Testing - Gloss Meter PCE-IGM 60

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

Measurement geometry: 60° degree angle
Measuring range: 0 … 1000 GU
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Light source: D65
Wave length: 400-700 nm

Surface Testing - Gloss Meter PCE-SGM 60

£ 1,136.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).

Measurement geometry: 60° degree angle
Measurement up to 1000 gloss units
Internal reading memory up to 5000 readings
3.5" TFT display
Light source: D65
Wave length: 400-700 nm