Industrial Measurement Products and Solutions
Order no.: PCE-FB 500TW

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 500 Nm (50 kgfm)
- Resolution: 1 Nm
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 10K
The dynamometer PCE-DFG NF 10K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has on the bottom of several threaded holes that allow a firm installation. The dynamometer PCE-DFG NF 10K can be purchased here in our online shop. 

- Measuring range: 0 ... 10 kN / 10,000 N / 2245 lbs
- Resolution: 1 N / 0.22 lb
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 20K
The dynamometer PCE-DFG NF 20K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has on the bottom of several threaded holes that allow a firm installation. You can buy the dynamometer PCE-DFG NF 20K here in our online shop. 

- Measuring range: 0 ... 20 kN / 20,000 N / 4,500 lbs
- Resolution: 2 N / 0.5 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 50K
The dynamometer PCE-DFG NF 50K with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has on the bottom of several threaded holes that allow a firm installation. You can buy the dynamometer PCE-DFG NF 50K here in our online shop. 

- Measuring range: 0 ... 50 kN / 50,000 N / 11,240 lbs
- Resolution: 5 N / 1.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 10K
The force gauge PCE-DFG NF 10K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gauge or the load cell has on the bottom of several threaded holes that allow a firm installation. The force gauge PCE-DFG NF 10K can be purchased here in our online shop. 

- Measuring range: 0 ... 10 kN / 10,000 N / 2245 lbs
- Resolution: 1 N / 0.22 lb
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 20K
The force gauge PCE-DFG NF 20K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gauge or the load cell has on the bottom of several threaded holes that allow a firm installation. You can buy the force gauge PCE-DFG NF 20K here in our online shop. 

- Measuring range: 0 ... 20 kN / 20,000 N / 4,500 lbs
- Resolution: 2 N / 0.5 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 50K
The force gauge PCE-DFG NF 50K with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The force gauge or the load cell has on the bottom of several threaded holes that allow a firm installation. You can buy the force gauge PCE-DFG NF 50K here in our online shop. 

- Measuring range: 0 ... 50 kN / 50,000 N / 11,240 lbs
- Resolution: 5 N / 1.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: RT STROBE 3000 LED

Stationary strobe tachometer with intelligent LED-technology.


- Wear-resistant LED flash production
- 0 to 120,000 FPM
- 6000 LUX at 30 cm
- Illumination area of 20 by 30 cm
- Widths > 300 mm
- Strobes can be connected in parallel

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: RT STROBE 3000 LED

Stationary stroboscope with intelligent LED-technology.


- Wear-resistant LED flash production
- 0 to 120,000 FPM
- 6000 LUX at 30 cm
- Illumination area of 20 by 30 cm
- Widths > 300 mm
- Strobes can be connected in parallel

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 833

A Series 833 Force Gauge is ideal for permanent use on machinery, systems and equipment. Our hydraulic force gauge is based on the principle that a hydraulically transmitted force acts on the load cell, which then transmits the measured value directly to the dial gauge.


- Nominal load: up to 400 kN (depending on the model)
- Measurement uncertainty: ≤ ± 1.5 %
- Temperature range: 0 ... 50 °C / 32 ... 122 °F


Please make your selection in the technical data or in the shopping cart.

Manufacturer: Erichsen GmbH & Co. KG
Test Instruments manufacturer
Order no.: PCE-WSB 1

PCE-WSB 1 is a portable handheld battery-powered brightness / whiteness color meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

- Measures the whiteness degree of blue light (Wb = R457)
- Meets ISO 2470 and ISO 3688 standards
- Compact, lightweight and user-friendly

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSB 1

PCE-WSB 1 is a portable handheld battery-powered brightness / whiteness colorimeter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

- Measures the whiteness degree of blue light (Wb = R457)
- Meets ISO 2470 and ISO 3688 standards
- Compact, lightweight and user-friendly

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSB 1

PCE-WSB 1 is a portable handheld battery-powered brightness tester or whiteness color meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

- Measures the whiteness degree of blue light (Wb = R457)
- Meets ISO 2470 and ISO 3688 standards
- Compact, lightweight and user-friendly

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U
The floor scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated floor scale are the standard EU size (1200 x 800 mm).

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U
The heavy duty scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated heavy duty scale are the standard EU size (1200 x 800 mm).

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U
The industrial scales are verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated industrial scales are the standard EU size (1200 x 800 mm).

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U
The pallet scales are calibratable, and also initially calibrated, designed for mobile applications and having a U-shaped design. The size and measurements of the calibrated pallet scales PCE-SD U series are accordant to European standard pallet scales (1200 x 800 mm). The U-shape of the calibrated pallet scales allows easy positioning of EU standard pallets on the scales, preferably with a forklift.

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSB 1

PCE-WSB 1 is a portable handheld battery-powered surface testing - brightness / whiteness color meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.


- Measures the whiteness degree of blue light (Wb = R457)
- Meets ISO 2470 and ISO 3688 standards
- Compact, lightweight and user-friendly

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-5000-STAND

The PCE-5000-STAND test stand for the PCE-5000 hardness tester is used to support the automatic test probes. The test stand allows automated measurements, with a higher reproducibility of tubes and round material.

 

- Measuring stand for PCE-5000 hardness tester
- Support of automatic test probes

 

Automatic test probes and meter not included.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TTM 10

The screw cap torque meter PCE-TTM 5 is used for testing the torque on various kinds of screw caps. That screw cap torque tester determines quickly and with certainty the required expenditure of force for opening and closing screw caps. Therefore the course of the torque test is recorded continuously, so that the results can be evaluated either at the screw cap torque tester itself or on a computer.


- Measurement range: 10 Nm / 1,000 Ncm / 1000 gfm / 100 lbfin
- Measuring resolution: 0.01 Nm / 1 Ncm / 1 gfm / 0.1 lbfin
- Measuring speed up to 1,000 Hz
- For rotation to left or right side

 

Manufacturer: PCE Instruments
Test Instruments manufacturer