Industrial Measurement Products and Solutions
Order no.: Xgard-1-PH3

The Xgard-1-PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
£ 1,090.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-428-Kit-ICA

The PCE-428-KIT-ICA Noise Meter / Sound Meter Kit is commonly used by professionals to ensure compliance with environmental noise regulations and workplace noise permissible exposure limits. The noise meter / sound meter also functions as a data logger, recording measurements at an adjustable interval from 1 s ... 24 h and storing the recorded measurement data to a micro SD card memory. Alternatively, the noise meter / sound meter can be connected directly to a PC via USB.

- Class 2
- Measuring range: 25 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Kit includes type 2 / class 2 acoustic calibrator (PCE-SC 42)
- incl. ISO Calibration Certificate for PCE-428 and ISO Calibration Certificate for PCE-SC 42

Manufacturer: PCE Instruments
£ 1,099.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-428-Kit-ICA

The PCE-428-KIT-ICA Sound Level Meter Kit is commonly used by professionals to ensure compliance with environmental noise regulations and workplace noise permissible exposure limits. The sound level meter also functions as a data logger, recording measurements at an adjustable interval from 1 s ... 24 h and storing the recorded measurement data to a micro SD card memory. Alternatively, the sound level meter can be connected directly to a PC via USB.

- Class 2
- Measuring range: 25 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Kit includes type 2 / class 2 acoustic calibrator (PCE-SC 42)
- incl. ISO Calibration Certificate for PCE-428 and ISO Calibration Certificate for PCE-SC 42

Manufacturer: PCE Instruments
£ 1,099.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-428-Kit-ICA

The PCE-428-KIT-ICA class 2 data-logging condition monitoring noise meter kit is commonly used by professionals to ensure compliance with environmental noise regulations and workplace noise permissible exposure limits. The condition monitoring noise meter kit also functions as a data logger, recording measurements at an adjustable interval from 1 s ... 24 h and storing the recorded measurement data to a micro SD card memory. Alternatively, the sound level meter can be connected directly to a PC via USB.

- Class 2
- Measuring range: 25 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Kit includes type 2 / class 2 acoustic calibrator (PCE-SC 42)
- incl. ISO Calibration Certificate for PCE-428 and ISO Calibration Certificate for PCE-SC 42

Manufacturer: PCE Instruments
£ 1,099.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-428-Kit-ICA

The PCE-428-KIT-ICA Sound Level Data Logger Kit is commonly used by professionals to ensure compliance with environmental noise regulations and workplace noise permissible exposure limits. The sound level data logger also functions as a data logger, recording measurements at an adjustable interval from 1 s ... 24 h and storing the recorded measurement data to a micro SD card memory. Alternatively, the sound level data logger can be connected directly to a PC via USB.

- Class 2
- Measuring range: 25 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- Kit includes type 2 / class 2 acoustic calibrator (PCE-SC 42)
- incl. ISO Calibration Certificate for PCE-428 and ISO Calibration Certificate for PCE-SC 42

Manufacturer: PCE Instruments
£ 1,099.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-DFG N 100K
The dynamometer PCE-DFG N 100K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The dynamometer helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 100 kN / 100,000 N
- Resolution: 10 N
- Accuracy: ± 1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
Manufacturer: PCE Instruments
£ 1,099.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-DFG N 100K
The force gauge PCE-DFG N 100K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gauge helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 100 kN / 100,000 N
- Resolution: 10 N
- Accuracy: ± 1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
Manufacturer: PCE Instruments
£ 1,099.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PGM 100-ICA

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,099.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PGM 100-ICA

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.


- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU 
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,099.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: Tcgard-CH4

Single-Gas Gas Leak Detector warning for gases (for Methane CH4), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).


- Stationary
- For Methane CH4
- Additional display and alarm station
- ATEX approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
£ 1,087.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: TCgard-CO2

Single-Gas Gas Leak Detector warning for gases (for Carbon Dioxide CO2), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).


- Stationary
- For Carbon Dioxide CO2
- Additional display and alarm station
- ATEX approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
£ 1,087.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-MA 200

The absolute moisture meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The absolute moisture meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
Accuracy to 0.01 %

Manufacturer: PCE Instruments
£ 1,090.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-MA 200

The analytical balance PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The analytical balance dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g 
- Adjustable drying temperature and time
Accuracy to 0.01 %

Manufacturer: PCE Instruments
£ 1,090.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-MA 200

The benchtop scale PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The benchtop scale dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time 
Accuracy to 0.01 %

 

Manufacturer: PCE Instruments
£ 1,090.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-CSM 1

The color meter PCE-CSM 1 was developed for quality control and offers a very high accuracy. When using the color meter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the color meter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference values easily. 6 mm aperture for sample scanning.


- CIE L*a*b*C*h, L*a*b* and XYZ
- Automatic white and black calibration
- 8°/d geometry diffused illumination integrating sphere system
- Rechargable Li-ion battery

 

Manufacturer: PCE Instruments
£ 1,090.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-CSM 1

The handheld portable digital colorimeter PCE-CSM 1 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference value easily. A 6 mm aperture is used for sample scanning.


- CIE L*a*b*C*h, L*a*b* and XYZ
- Automatic white and black calibration
- 8°/d geometry diffused illumination integrating sphere system
- Rechargeable Li-ion battery

 

Manufacturer: PCE Instruments
£ 1,090.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-DFG N 100TW
The force gauge consists of a hand-held measuring device and an external torque transducer. The force gauge is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm
- Resolution: 0.1 Nm
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
Manufacturer: PCE Instruments
£ 1,090.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: Xgard-1-PH3

The Xgard-1-PH3 is a single-gas Gassensor used to warn for gases (Phosphine, PH3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
£ 1,090.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-MA 200

The LAB Scale PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The LAB scale dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
Accuracy to 0.01 %

Manufacturer: PCE Instruments
£ 1,090.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-MA 200

The laboratory balance PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The laboratory balance dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g 
- Adjustable drying temperature and time
Accuracy to 0.01 %

Manufacturer: PCE Instruments
£ 1,090.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer