Industrial Measurement Products and Solutions
Order no.: PCE-WSAC 50W 230-ICA

The anemometer PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the anemometer, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 390N

PCE-VE 390N is the ideal downhole inspection camera for the evaluation of homes and buildings (walls, supports, eaves, gutters, attics, crawl spaces), plumbing (pipes, drains, sewers, wells) and heating, ventilation, air conditioning and refrigeration (HVACR) systems (ducts, furnaces, chimneys, boiler and condenser tubes). The IP68-rated cable of this chimney and drain camera is waterproof and heavy duty, making the PCE-VE 390N well suited for use in harsh environments like construction sites, manholes and industrial waste pipes.


- Camera head diameter: 28 mm / 1.1"
- Camera cable length: 10 m / 32 ft 9"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Especially suitable for chimneys, downpipes, ventilation ducts etc.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 390N

PCE-VE 390N is the ideal industrial borescope or snake inspection camera for the analysis of buildings (walls, supports, eaves, gutters, attics, crawl spaces), plumbing (pipes, drains, sewers, wells) and heating, ventilation, air conditioning and refrigeration (HVACR) systems (ducts, furnaces, chimneys, boiler and condenser tubes). The IP68-rated cable of this inspection camera is waterproof and heavy duty, making the PCE-VE 390N well suited for use in tough environments like construction sites and industrial installations.


- Camera head diameter: 28 mm / 1.1"
- Camera cable length: 10 m / 32 ft 9"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Especially suitable for chimneys, downpipes, ventilation ducts etc.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 390N

PCE-VE 390N is the ideal snake camera for the analysis of buildings (walls, supports, eaves, gutters, attics, crawl spaces), plumbing (pipes, drains, sewers, wells) and heating, ventilation, air conditioning and refrigeration (HVACR) systems (ducts, furnaces, chimneys, boiler and condenser tubes).


- Camera head diameter: 28 mm / 1.1"
- Camera cable length: 10 m / 32 ft 9"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Especially suitable for chimneys, downpipes, ventilation ducts etc.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 390N

PCE-VE 390N is the ideal snake videoscope or inspection camera for the analysis of buildings (walls, supports, eaves, gutters, attics, crawl spaces), plumbing (pipes, drains, sewers, wells) and heating, ventilation, air conditioning and refrigeration (HVACR) systems (ducts, furnaces, chimneys, boiler and condenser tubes). The IP68-rated cable of this inspection camera is waterproof and heavy duty, making the PCE-VE 390N well suited for use in tough environments such as construction sites and industrial installations.


- Camera head diameter: 28 mm / 1.1"
- Camera cable length: 10 m / 32 ft 9"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Especially suitable for chimneys, downpipes, ventilation ducts etc.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 390N

PCE-VE 390N is the ideal inspection camera snake for the analysis of buildings (walls, supports, eaves, gutters, attics, crawl spaces), plumbing (pipes, drains, sewers, wells) and heating, ventilation, air conditioning and refrigeration (HVACR) systems (ducts, furnaces, chimneys, boiler and condenser tubes). The IP68-rated cable of this inspection camera is waterproof and heavy duty, making the PCE-VE 390N well suited for use in tough environments like construction sites and industrial installations.


- Camera head diameter: 28 mm / 1.1"
- Camera cable length: 10 m / 32 ft 9"
- Interface: Mini-USB 1.1 and AV out
- Memory: 8 GB SD memory card (incl.)
- Especially suitable for chimneys, downpipes, ventilation ducts etc.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 230-ICA

The Wind Speed Alarm Controller PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the wind speed alarm controller, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50W 230-ICA

The Wind Speed Meter PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the wind speed meter, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: HFX205-100

This Formaldehyde Meter HFX205-100 is designed to detect formaldehyde in air. The Formaldehyde Meter HFX205-100 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Meter HFX205-100 runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Range Formaldehyde: 0…100 ppm

- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer 

Manufacturer: HAL TECHNOLOGY, LLC
Test Instruments manufacturer
Order no.: HFX205-25

This Formaldehyde Tester HFX205-25 is designed to detect formaldehyde in air. The Formaldehyde Tester HFX205-25 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Tester HFX205-25 runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Range Formaldehyde: 0…25 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
Test Instruments manufacturer
Order no.: HFX205-50

This Formaldehyde Tester HFX205-50 is designed to detect formaldehyde in air. The Formaldehyde Tester HFX205-50 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Tester HFX205-50 runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Range Formaldehyde: 0…50 ppm

- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
Test Instruments manufacturer
Order no.: PCE-IS02

The industrial scales PCE-IS02 are professional systems for counting, and consists of a quantity and a reference scale. The reference scale takes on the smallest components while the balance calculates the number of pieces. This industrial scales are particularly well suited for inventories.


- Weighing scale capacity: 150 kg
- Weighing scale readability: 50 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IS02

The package scale PCE-IS02 is a professional system for counting, and consists of a quantity and a reference scale. The reference scale takes on the smallest components while the balance calculates the number of pieces. This package scale is particularly well suited for inventories.


- Weighing scale capacity: 150 kg
- Weighing scale readability: 50 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IS02

The package scale PCE-IS02 is a professional system for counting, and consists of a quantity and a reference scale. The reference scale takes on the smallest components while the balance calculates the number of pieces. This package scale is particularly well suited for inventories.


- Weighing scale capacity: 150 kg
- Weighing scale readability: 50 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IS02

The piece counting scale PCE-IS02 is a professional system for counting, and consists of a quantity and a reference scale. The reference scale takes on the smallest components while the balance calculates the number of pieces. This piece counting scale is particularly well suited for inventories.


- Weighing scale capacity: 150 kg
- Weighing scale readability: 50 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IS02

The precision balances PCE-IS02 are professional systems for counting, and consists of a quantity and a reference balance. The reference balance takes on the smallest components while the balance calculates the number of pieces. This precision balances are particularly well suited for inventories.


- Weighing scale capacity: 150 kg
- Weighing scale readability: 50 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g
- Calibrated

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IS02

The scale PCE-IS02 is a professional system for counting, and consists of a quantity and a reference scale. The reference scale takes on the smallest components while the balance calculates the number of pieces. This scale is particularly well suited for inventories.


- Weighing scale capacity: 150 kg
- Weighing scale readability: 50 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IS02

The tabletop scale PCE-IS02 is a professional system for counting, and consists of a quantity and a reference scale. The reference scale takes on the smallest components while the balance calculates the number of pieces. This tabletop scale is particularly well suited for inventories.


- Weighing scale capacity: 150 kg
- Weighing scale readability: 50 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IS02

The weigh platform PCE-IS02 is a professional system for counting, and consists of a quantity and a reference scale. The reference scale takes on the smallest components while the balance calculates the number of pieces. This weigh platform is particularly well suited for inventories.


- Weighing scale capacity: 150 kg
- Weighing scale readability: 50 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IS02

The weighing platform PCE-IS02 is a professional system for counting, and consists of a quantity and a reference scale. The reference scale takes on the smallest components while the balance calculates the number of pieces. This weighing platform is particularly well suited for inventories.


- Weighing scale capacity: 150 kg
- Weighing scale readability: 50 g
- Reference scale capacity: 2,000 g
- Reference scale readability: 0.01 g

 

Manufacturer: PCE Instruments
Test Instruments manufacturer