Order no.: PCE-IGM 60-ICA

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 1000 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 988.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SGM 60-ICA

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 988.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: Xgard-1-O3

The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
£ 976.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DFG N 5K-ICA
The force gage PCE DFG N 5K-ICA measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 983.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DFG N 5K-ICA
The force gauge PCE DFG N 5K-ICA measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 983.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: AQ-200 Set EF

The Formaldehyde Meter AQ-200 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air. You can buy the Formaldehyde Meter AQ-200 Set EF here in our online shop.


- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- LCD display
- Battery operation
- Sensor calibration function
- Max. / Min. / Average function

Manufacturer: AeroQual Limited
£ 983.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: AQ-200 Set EF

The Gas Detector AQ-200 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.


- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- LCD display
- Battery operation
- Sensor calibration function
- Max. / Min. / Average function

Manufacturer: AeroQual Limited
£ 983.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: AQ-200 Set EF

The Gas Leak Detector AQ-200 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air.


- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- LCD display
- Battery operation
- Sensor calibration function
- Max. / Min. / Average function

Manufacturer: AeroQual Limited
£ 983.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LDC 8
The Gas Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Gas Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound
- Measuring principle: air, coolant, non-explosive gases
- Working frequency of 40 kHz
- up to 6 h battery operation 
- Leak detection via headphones and LCD display
- Localize leaks up to 18m, 59 ft.
Manufacturer: PCE Instruments
£ 979.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LDC 8
The Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound
- Measuring principle: air, coolant, non-explosive gases
- Working frequency of 40 kHz
- up to 6 h battery operation 
- Leak detection via headphones and LCD display
- Localize leaks up to 18m, 59 ft.
Manufacturer: PCE Instruments
£ 979.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LDC 8
The Ultrasonic Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Ultrasonic Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound
- Measuring principle: air, coolant, non-explosive gases
- Working frequency of 40 kHz
- up to 6 h battery operation 
- Leak detection via headphones and LCD display
- Localize leaks up to 18m, 59 ft.
Manufacturer: PCE Instruments
£ 979.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: Xgard-1-O3

The Xgard-1-O3 is a single-gas Gassensor used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
£ 976.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-RS 2000-ICA

The parcel scale PCE-RS 2000-ICA is designed for stationary use. The robust construction makes this parcel scale particularly well suited for weighing large objects. The parcel scale is made of painted steel.

 

- Weighing capacity: 2000 kg
- Resolution: 0.5 kg
- Bidirectional RS-232 interface
- Analog output 4 ... 20 mA optional
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 970.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-RS 2000-ICA

The platform scale PCE-RS 2000-ICA is designed for stationary use. The robust construction makes this platform scale particularly well suited for weighing large objects. The platform scale is made of painted steel.

 

- Weighing capacity: 2000 kg
- Resolution: 0.5 kg
- Bidirectional RS-232 interface
- Analog output 4 ... 20 mA optional
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 970.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-RS 2000-ICA

The weighbridge PCE-RS 2000-ICA is designed for stationary use. The robust construction makes this weighbridge particularly well suited for weighing large objects. The weighbridge is made of painted steel.

 

- Weighing capacity: 2000 kg
- Resolution: 0.5 kg
- Bidirectional RS-232 interface
- Analog output 4 ... 20 mA optional
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 970.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-RS 2000-ICA

The weighing platform PCE-RS 2000-ICA is designed for stationary use. The robust construction makes this weighing platform particularly well suited for weighing large objects. The weighing platform is made of painted steel.

 

- Weighing capacity: 2000 kg
- Resolution: 0.5 kg
- Bidirectional RS-232 interface
- Analog output 4 ... 20 mA optional
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 970.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DFG N 1K-ICA
The PCE-DFG N 1K-ICA force gage measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 961.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DFG N 2.5K-ICA
The PCE-DFG N 2.5K-ICA force gage measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch.

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 961.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DFG N 1K-ICA
The PCE-DFG N 1K-ICA force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 961.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DFG N 2.5K-ICA
The PCE-DFG N 2.5K-ICA force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch.

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 961.00

Price excl. VAT &. delivery
2 year Warranty