Industrial Measurement Products and Solutions
Order no.: AQ-300 Set EF

The Formaldehyde Meter AQ-300 Set EF is a high-precision measuring device for measuring the formaldehyde concentration in our circulating air. You can buy the Formaldehyde Meter AQ-300 Set EF here in our online shop.


- Range Formaldehyde: 0...10 ppm
- High accuracy and functionality
- Alarm function: "High", "Low", Mute
- Alarm output: Transistor output, 150-mA max
- Low Alarm, High Alarm & Control
- Analog output: 0... 5V
- Location ID: Storage of the measuring location

Manufacturer: AeroQual Limited
£ 1,064.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: HFX205-100

This Formaldehyde Meter HFX205-100 is designed to detect formaldehyde in air. The Formaldehyde Meter HFX205-100 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Meter HFX205-100 runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Range Formaldehyde: 0…100 ppm

- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
£ 1,063.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: HFX205-25

This Formaldehyde Meter HFX205-25 is designed to detect formaldehyde in air. The Formaldehyde Meter HFX205-25 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Meter HFX205-25 runs with the help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Range Formaldehyde: 0…25 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
£ 1,063.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: HFX205-50

This Formaldehyde Meter HFX205-50 is designed to detect formaldehyde in air. The Formaldehyde Meter HFX205-50 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Meter HFX205-50 runs with help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.


- Range Formaldehyde: 0…50 ppm

- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

Manufacturer: HAL TECHNOLOGY, LLC
£ 1,063.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-WSAC 50W 230
The Air Flow Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air flow meter means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-WSAC 50W 24
The Air Flow Meter PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air flow meter means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-WSAC 50W 230
The Air Velocity Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air velocity meter means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-WSAC 50W 24
The Air Velocity Meter PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air velocity meter means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-WSAC 50W 24
The anemometer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SD 300SST C
Verifiable waterproof bench counting scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

- Weighing capacity: 300 kg
- Readability: 100g
- Calibration value: 100 g
- Weighing surface: 600 x 500 mm
- Verifiable M III
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SD 300SST C
Verifiable waterproof benchtop scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

- Weighing capacity: 300 kg
- Readability: 100g
- Calibration value: 100 g
- Weighing surface: 600 x 500 mm
- Verifiable M III
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HT-450
The concrete hardness tester is an analog measuring device to determine concrete strength. The measuring method of the concrete hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete hardness tester. The resulting rebound enables the concrete hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HT-450
The concrete rebound test hammer is an analog measuring device to determine concrete strength. The measuring method of the concrete rebound test hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete rebound test hammer. The resulting rebound enables the concrete rebound test hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-WSAC 50W 230
The anemometer PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HT-450
The durometer is an analog measuring device to determine concrete strength. The measuring method of the concrete durometer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the durometer. The resulting rebound enables the durometer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SD 300SST C
Verifiable waterproof industrial scales in stainless steel with separate indicator (no corrosion). The industrial scales are manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

- Weighing capacity: 300 kg
- Readability: 100g
- Calibration value: 100 g
- Weighing surface: 600 x 500 mm
- Verifiable M III
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SD 300SST C
Verifiable waterproof laboratory balance in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

- Weighing capacity: 300 kg
- Readability: 100g
- Calibration value: 100 g
- Weighing surface: 600 x 500 mm
- Verifiable M III
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SD 300SST C
Verifiable waterproof laboratory scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

- Weighing capacity: 300 kg
- Readability: 100g
- Calibration value: 100 g
- Weighing surface: 600 x 500 mm
- Verifiable M III
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-SD 300SST C
Legal for Trade Balance in stainless steel with separate indicator (no corrosion). The Legal for Trade Balance is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

- Weighing capacity: 300 kg
- Readability: 100g
- Calibration value: 100 g
- Weighing surface: 600 x 500 mm
- Verifiable M III
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HT-450
The material tester is an analog measuring device to determine concrete strength. The measuring method of the material tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the material tester. The resulting rebound enables the material tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Manufacturer: PCE Instruments
£ 1,059.00

Price excl. VAT &. delivery
2 year Warranty