The PCE-N20T digital temperature indicator is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the PCE-N20T. Depending on the actual values, the Temperature can be shown in three different colors, which makes it easier to evaluate them.

- Input: Pt100, thermocouple type J or type K
- Accuracy: ± (0.2 % FS + 1 dgt.)
- two open collector outputs
- 24 V power supply sytem for sensors and transducers
- 5-digit, three-coloured LED display

PCE-N20U is a digital temperature indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

The Temperature Meter Log10 is suitable for recording of temperature trends during transport and storage and is used for continuous temperature monitoring in various fields. Includes software and USB cable.

- Measuring range: -30 ... 60°C / -22 ... 140°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ± 0.5°C (0.9°F) / -20 ... 50°C (-4 ... 122°F)
- Memory capacity: approximately 20,000 readings

The temperature meter is suitable for private and industrial use because of its price-performance ratio. An infrared temperature meter is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

- Optical resolution 30:1
- Measuring range of -50 ... 1000°C / -58 ... 1832°F
- Maximum value display
- Adjustable emissivity 

The PCE-N20T digital indicator is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the PCE-N20T. Depending on the actual values, the Temperature can be shown in three different colors, which makes it easier to evaluate them.

- Input (selectable): Pt100, thermocouple type J or type K
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- For Pt100 sensors or thermocouples

The infrared thermometer is suitable for private and industrial use because of its price-performance ratio. An infrared thermometer is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

- Optical resolution 30:1
- Measuring range of -50 ... 1000°C /-58 ... 1832°F
- Maximum value display
- Adjustable emissivity 

The PCE-N20I voltage indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

PCE-N20U is a voltage indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 

- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1

Mechanical hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 

- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Measurement range: 10 ... 90 (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1

The PCE-P20Z transmitter is used to convert a measured current into a standard signal. This makes it possible to determine the most diverse currents with the transmitter.

- Input: Alternating current
- Various supply voltages
- For direct or indirect current measurement
- Current transformer can be connected
- With voltage output or current output

Note: This item must be configured before ordering!

The PCE-P20Z measuring transducer measures voltages up to 600 V AC and converts this into a standard signal. Depending on the design, the PCE-P20U-I transducer can measure voltages up to 250 V AC, 400 V AC or 600 V AC and outputs a 4 ... 20 mA standard signal. Depending on the model, the supply voltage of the transducers is either 85 ... 253 V AC / DC or 20 ... 40 V AC / DC.

- RMS Measurement of voltages up to 600 V AC
- Input: AC voltage
- Output: 4 ... 20 mA or 0 ... 10 V Standard signal
- Various supply voltages

Note: This item must be configured before ordering!