Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

 

The wall moisture meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the wall moisture meter. This guarantees a non-destructive measurement with the wall moisture meter. The wall moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

The wood moisture meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the wood moisture meter. This guarantees a non-destructive measurement with the wood moisture meter. The wood moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

The digital universal indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the digital universal indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the digital universal indicator.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

With the air humidity meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the air humidity meter. The air humidity meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function

With the climate meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the climate meter. The climate meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function

With the dew point thermometer it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the dew point thermometer. The dew point thermometer can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function

With the environmental meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental meter. The environmental meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function

With the environmental tester it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental tester. The environmental tester can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function

The frequency indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the frequency indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the frequency indicator.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

PCE-N20U is a frequency indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

PCE-DT 65 is a digital handheld tachometer, or rotation meter, that can take both contact and non-contact measurements of rotation speed and linear speed. This handheld tachometer features an integrated laser and includes a mechanical attachment with contact probes, making it the ideal measuring instrument for machines, motors, conveyor belts and other moving parts.

- Speed (rpm)
- Surface speed (m / min),
- Number of revolutions (counter)
- Frequency (Hz)
- Length measurement (m, in, ft, yd)

With the humidity detector it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the humidity detector. The humidity detector can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function

With the hygrometer it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the hygrometer. The hygrometer can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function

The panel indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the panel indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the panel indicator.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

The PCE-N20U is a panel indicator used for signal processing. Designed for quick and easy system integration, the digital panel indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel indicator also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

The panel meter is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the panel meter suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the panel meter.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

The PCE-N20U is a panel meter used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel meter also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers