Industrial Measurement Products and Solutions
Order no.: Xgard-1-PH3

The Xgard-1-PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: GTI MM-2eUV

A Color Matching Cabinet enables the user to make direct color measurements of goods which are planned to be produced or which are being produced already. Therefore, color measurements by means of a Color Matching Cabinet are crucial for companies that wish to offer products of high and constant quality. This Color Matching Cabinet supports up to four different light sources, depending on the model.


- Standard illuminant: D65
- Office light: TL84
- House light: A
- Lighting Area: 36 x 46 x 25 cm (L x W x H)
- Ultraviolet: UV

 

Manufacturer: GTI GmbH
Test Instruments manufacturer
Order no.: GTI MM-2eUV

A color viewing box enables the user to make direct color measurements of goods which are planned to be produced or which are being produced already. Therefore, color measurements by means of a color viewing box are crucial for companies that wish to offer products of high and constant quality. This color viewing box supports up to four different light sources, depending on the model.


- Standard illuminant: D65
- Office light: TL84
- House light: A
- Lighting Area: 36 x 46 x 25 cm (L x W x H)
- Ultraviolet: UV

 

Manufacturer: GTI GmbH
Test Instruments manufacturer
Order no.: AQ-500

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Battery operation
- Alarm function
- Data logger

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: Xgard-1-PH3

The Xgard-1-PH3 is a single-gas Gassensor used to warn for gases (Phosphine, PH3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: AQ-500

Ozone Meter AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Battery operation
- Alarm function
- Data logger

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: PCE-SD 1500U

The floor scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated floor scale are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U

The heavy duty scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated heavy duty scale are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U

The industrial scales are verifiable, calibrated U-shaped pallet scales intended for mobile use. The dimensions of the calibrated industrial scales are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U

The pallet scales are calibratable, and also initially calibrated, designed for mobile applications and having a U-shaped design. The size and measurements of the calibrated pallet scales PCE-SD U series are accordant to European standard pallet scales (1200 x 800 mm). The U-shape of the calibrated pallet scales allows easy positioning of EU standard pallets on the scales, preferably with a forklift.


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U
The system balance is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated system balance are the standard EU size (1200 x 800 mm).

- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5kg
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U

The weighbridge is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated weighbridge are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U

The weighing beam is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated weighing beam are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U

The weight indicator is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated weight indicator are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RTS 620

The PCE-RTS 620 is a roughness test stand that works with the PCE-RT 2200. If the Ra value of the surface is low then you should use a test stand to ensure precise measurements.


- Stroke is 300 mm
- Dimensions are 400 x 250 x 70 mm
- Weight is 30 kg

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2000
The profilometer PCE-RT 2000 is used for accurate measurement of surface roughness. The profilometer PCE-RT 2000 can be used on all surfaces. The roughness with the profilometer is precisely recorded via the piezotast head. The profilometer PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2000
The roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The roughness tester PCE-RT 2000 can be used on all surfaces. The roughness with the roughness measuring device is precisely recorded via the piezotast head. The roughness tester PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2000
The surface tester PCE-RT 2000 is used for accurate measurement of surface roughness. The surface tester PCE-RT 2000 can be used on all surfaces. The roughness with the roughness measuring device is precisely recorded via the piezotast head. The surface tester PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 11-ICA

The Material Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.


- Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
- Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
- Robust Piezoelectric sensor
- Accuracy: ± 15% and Repeatability < 6%
- Built-in rechargeable li-ion battery
- Inc. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 11-ICA

The Profilometer PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.


- Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
- Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
- Robust Piezoelectric sensor
- Accuracy: ± 15% and Repeatability < 6%
- Built-in rechargeable li-ion battery
- Inc. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer