The PCE-N20I digital indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

The PCE-N20Z digital indicator can be used for measuring AC voltages up to 400 V and AC currents up to 5 A. The current or voltage to be measured can be connected directly to the digital indicator PCE-N20Z. The measurement results are shown on the large 5-digit LED-display of the PCE-N20Z.

- Input (selectable): 100 V AC, 250 V AC, 400 V AC, 1 A AC, 5 A AC, 20...500 Hz
- Accuracy: ± (0.5 % FS + 1 dgt.)
- Two open collector outputs
- 5-digit, three-colored LED display

PCE-N20U is a power indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

The PCE-N20I pressure indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

PCE-N20U is a pressure indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

The PCE-N20I process indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

PCE-N20U is a process indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

The temperature Data Logger Log10 is suitable for recording of temperature trends during transport and storage and is used for continuous temperature monitoring in various fields. Includes software and USB cable. These data logging instruments are manufacturer calibrated and can be equipped with an additional ISO calibration certificate.

- Measuring range: -30 ... 60°C / -22 ... 140°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ± 0.5°C (0.9°F) / -20 ... 50°C (-4 ... 122°F)
- Memory capacity: approximately 20,000 readings

The PCE-N20I digital temperature indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

The PCE-N20T digital temperature indicator is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the PCE-N20T. Depending on the actual values, the Temperature can be shown in three different colors, which makes it easier to evaluate them.

- Input: Pt100, thermocouple type J or type K
- Accuracy: ± (0.2 % FS + 1 dgt.)
- two open collector outputs
- 24 V power supply sytem for sensors and transducers
- 5-digit, three-coloured LED display

PCE-N20U is a digital temperature indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

The Temperature Meter Log10 is suitable for recording of temperature trends during transport and storage and is used for continuous temperature monitoring in various fields. Includes software and USB cable.

- Measuring range: -30 ... 60°C / -22 ... 140°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ± 0.5°C (0.9°F) / -20 ... 50°C (-4 ... 122°F)
- Memory capacity: approximately 20,000 readings

The PCE-N20T digital indicator is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the PCE-N20T. Depending on the actual values, the Temperature can be shown in three different colors, which makes it easier to evaluate them.

- Input (selectable): Pt100, thermocouple type J or type K
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- For Pt100 sensors or thermocouples

The PCE-N20I voltage indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.

- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

PCE-N20U is a voltage indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 

- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1

Mechanical hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 

- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Measurement range: 10 ... 90 (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1

The conductivity meter PCE-PWT 10 is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

- conductivity: 0 ... 20 µS/cm ...
- salinity: 0,00 ... 10.00 ppt
- temperature: 0 ... 60 °C / 32 ... 140 °F
- automatic temperature compensation
- internal 3-point calibration

The PCE-P20Z transmitter is used to convert a measured current into a standard signal. This makes it possible to determine the most diverse currents with the transmitter.

- Input: Alternating current
- Various supply voltages
- For direct or indirect current measurement
- Current transformer can be connected
- With voltage output or current output

Note: This item must be configured before ordering!

PCE-P01 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- -0.137 to 0.137 bar (-2.000 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable