Order no.: PAC-EM-PB
Expansion module PAC PROFIBUS DP

- Plug-in communication module
- Module is automatically detected
- Programmable via front panel or software
- Cyclic and acyclic data transmission
- Easy integration using GSD file
- Baud rate of 9.6 kbit / s to 12 Mbit / s
- Connection via 9-pin Sub-D connector
Test Instruments manufacturer
Order no.: PCE-CM 41

With our conductivity meter PCE-CM 41 it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. Our conductivity meter PCE-CM 41 is very easy to carry everywhere thanks to its small size. Auto ranges up to 20,000 PPM.


- EC conductivity: 0...2,000 µS/cm  /  0...20 mS/cm
- Salt content TDS: 0...2,000 mg/l (ppm)  /  20,000 mg/l (ppm)
- Temperature: 0.0...60 °C / 32 ... 140 °F
- Water resistant (IP 67)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EMF 823

PCE-EMF 823 is a portable handheld single-axis electromagnetic field meter or Gauss meter for measuring electromagnetic fields (EMFs). This user-friendly EMF meter is ideal for assessing risks associated with exposure to electromagnetic radiation emitted from electric power lines, home appliances and industrial devices.


- EMF measuring ranges: 20 micro Tesla (µT) / 200 µT / 2000 µT and 200 milli-Gauss (mG) / 2000 mG / 20000 mG
- EMF bandwidth: 30 Hz to 300 Hz
- Sampling time: Approx. 1 second

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EMF 823

PCE-EMF 823 is a portable handheld single-axis electromagnetic radiation detector or Gauss meter for measuring electromagnetic fields (EMFs). This user-friendly EMF meter is ideal for assessing risks associated with exposure to electromagnetic radiation emitted from electric power lines, home appliances and industrial devices.


- EMF measuring ranges: 20 micro Tesla (µT) / 200 µT / 2000 µT and 200 milli-Gauss (mG) / 2000 mG / 20000 mG
- EMF bandwidth: 30 Hz to 300 Hz
- Sampling time: Approx. 1 second

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EMF 823

PCE-EMF 823 is a portable handheld single-axis environmental electromagnetic field radiation meter or Gauss meter for measuring electromagnetic fields (EMFs). This user-friendly EMF meter is ideal for assessing risks associated with exposure to electromagnetic radiation emitted from electric power lines, home appliances and industrial devices.


- EMF measuring ranges: 20 micro Tesla (µT) / 200 µT / 2000 µT and 200 milli-Gauss (mG) / 2000 mG / 20000 mG
- EMF bandwidth: 30 Hz to 300 Hz
- Sampling time: Approx. 1 second

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EMF 823

PCE-EMF 823 is a portable handheld single-axis environmental electromagnetic field radiation tester or Gauss meter for measuring electromagnetic fields (EMFs). This user-friendly EMF meter is ideal for assessing risks associated with exposure to electromagnetic radiation emitted from electric power lines, home appliances and industrial devices.


- EMF measuring ranges: 20 micro Tesla (µT) / 200 µT / 2000 µT and 200 milli-Gauss (mG) / 2000 mG / 20000 mG
- EMF bandwidth: 30 Hz to 300 Hz
- Sampling time: Approx. 1 second

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EMF 823

PCE-EMF 823 is a portable handheld single-axis Gauss meter or electromagnetic radiation detector for measuring electromagnetic fields (EMFs). This user-friendly EMF meter is ideal for assessing risks associated with exposure to electromagnetic radiation emitted from electric power lines, home appliances and industrial devices.


- EMF measuring ranges: 20 micro Tesla (µT) / 200 µT / 2000 µT and 200 milli-Gauss (mG) / 2000 mG / 20000 mG
- EMF bandwidth: 30 Hz to 300 Hz
- Sampling time: Approx. 1 second

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CAL-HBa
ISO calibration certificate for Barcol hardness testers / 1 measuring point (about 80 HBa) to comply with your DIN ISO 9000.

Calibration certificates are issued specifically for the customer and are excluded from the right of return.
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PHM 14
The pH Meter PCE-PHM 14 has been developed for permanent and easy pH monitoring. This pH meter can be easily mounted on a wall. Various pH electrodes can be connected via the BNC connector on the bottom of the PCE-PHM 14 pH meter. 


- measuring range: 0 ... 14 pH
- resolution: 0.01 pH
- compact device for wall mounting
- internal calibration function
- ideal for continuous monitoring
- includes pH electrode PE-03

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 41

Salt meter for EC and TDS (amount of salts and dissolved solid materials). Auto ranges up to 20,000 PPM.


- EC conductivity: 0...2000 µS/cm  /  0...20 mS/cm
- Salt content TDS: 0...2000 mg/l (ppm)  /  20,000 mg/l (PPM)
- Temperature: 0.0 ... 60 °C / 32 ... 140 °F
- Water resistant (IP 67)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 41

With the Water Analysis Meter PCE-CM 41, it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. The Conductivity Tester is very easy to carry everywhere thanks to its small size.


- EC conductivity: 0...2000 µS/cm  /  0...20 mS/cm
- Salt content TDS: 0...2000 mg/l (ppm)  /  20000 mg/l (ppm)
- Temperature: 0.0 ... 60 °C / 32 ... 140 °F
- Water resistant (IP 67)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PHM 14
The Water Analysis Meter PCE-PHM 14 has been developed for permanent and easy pH monitoring. This water analysis meter can be easily mounted on a wall. Various pH electrodes can be connected via the BNC connector on the bottom of the PCE-PHM 14 water analysis meter. 

- measuring range: 0 ... 14 pH
- resolution: 0.01 pH
- compact device for wall mounting
- internal calibration function
- ideal for continuous monitoring
- includes pH electrode PE-03

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N20U

PCE-N20U is a digital universal display panel meter used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.


- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N20I

The PCE-N20I digital universal indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.


- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N20U

PCE-N20U is a digital universal indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.


- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N20I

The PCE-N20I frequency indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.


- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N20U

PCE-N20U is a frequency indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.


- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSR 110
The inductive magnetic stirrer PCE-MSR-110, is a flat, space-saving laboratory magnetic stirrer. Due to the induction-based operation, a quiet operation and a flat design of the stirrer are made possible.

- Maximum stirring volume: 800 ml / 0.21 gallon based on water
- Flat construction
- Silent and wear-free drive
- Timer
- Agitator in stainless steel IP 65
- 1 stirring position Ø 94 mm / 3.7"
- Variably adjustable 15 - 1500 rpm
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N20I

The PCE-N20I panel indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.


- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N20U

PCE-N20U is a panel indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.


- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

Manufacturer: PCE Instruments
Test Instruments manufacturer